[offen] udev Regeln für interne Kamera und Logitech

Lieber Besucher, herzlich willkommen bei: Ubuntu-Forum & Kubuntu-Forum | www.Ubuntu-Forum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

giviflo

User

Beiträge: 2

Registrierungsdatum: 12.08.2015

Derivat: Kubuntu

Architektur: 64-Bit PC

Desktop: unbekannt

Andere Betriebssysteme: Server

12.08.2015, 12:15

udev Regeln für interne Kamera und Logitech

Moinsen alle zusammen.

Ich hab ein problem mit meinen Webcams.
Ich versuche über Motion eine Überwachung hinzubekommen und würde dazu gerne zwei Kameras verwenden.
Einmal die interne Kamera vom Laptop und einmal via USB angeschlossene Logitech.

sie werden auch erkannt siehe lsusb

	Quellcode
1 2	Bus 001 Device 002: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera Bus 001 Device 004: ID 046d:0825 Logitech, Inc. Webcam C270

starte ich jedoch den server wird entweder die interne oder die externe Kamera erkannt und verwendet
es läuft dabei jeweils auf /dev/video0 bzw /dev/video1

so ganz hinter gestiegen bin ich nicht, da es komplett willkührlich passiert. kann server neustarten und dann ist die aktive Kamera wieder eine ganz andere

hab jetzt versucht eine udev Regel zu schreiben unter /etc/udev/rules.de mit den namen 99webcamIntern.rules

	Quellcode
1 2	# integrierte webcam des laptop SUBSYSTEM=="video4linux", SUBSYSTEM=="usb", ATTRS{idVendor}=="0x0c45", ATTRS{idProduct}=="0x62c0", SYMLINK+="webcam1"

und 99webcamLogitech.rules

	Quellcode
1 2	# Logitech USB Webcam SUBSYSTEM=="video4linux", SUBSYSTEM=="usb", ATTR{idVendor}=="0x046d", ATTRS{idProdict}=="0x0825", SYMLINK+="webcam2"

hab die rules auch mal in einer datei zusammen geschrieben und in der hierarchie via namen auf 00webcam.rules genannt
aber es wird einfach kein webcam im dev ordner angelegt

lsusb -vs 001:002

Quellcode

lsusb -vs 001:002  --> also intern

Bus 001 Device 002: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Couldn't open device, some information will be missing
Device Descriptor:
  bLength            	18
  bDescriptorType     	1
  bcdUSB           	2.00
  bDeviceClass      	239 Miscellaneous Device
  bDeviceSubClass     	2 ?
  bDeviceProtocol     	1 Interface Association
  bMaxPacketSize0    	64
  idVendor       	0x0c45 Microdia
  idProduct      	0x62c0 Sonix USB 2.0 Camera
  bcdDevice        	1.00
  iManufacturer       	2 
  iProduct            	1 
  iSerial             	0 
  bNumConfigurations  	1
...

lsusb -vs 001:003 --> also Logitech

Quellcode

Bus 001 Device 004: ID 046d:0825 Logitech, Inc. Webcam C270
Device Descriptor:
  bLength            	18
  bDescriptorType     	1
  bcdUSB           	2.00
  bDeviceClass      	239 Miscellaneous Device
  bDeviceSubClass     	2 ?
  bDeviceProtocol     	1 Interface Association
  bMaxPacketSize0    	64
  idVendor       	0x046d Logitech, Inc.
  idProduct      	0x0825 Webcam C270
  bcdDevice        	0.10
  iManufacturer       	0 
  iProduct            	0 
  iSerial             	2 
  bNumConfigurations  	1
...

Die Info für udev regeln hab ich wie immer via udevadm bezogen

Quellcode

sudo udevadm info --query=all --attribute-walk --name=/dev/video0

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/video4linux/video0':
	KERNEL=="video0"
	SUBSYSTEM=="video4linux"
	DRIVER==""
	ATTR{name}=="WebCam"
	ATTR{debug}=="0"
	ATTR{index}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0':
	KERNELS=="1-4:1.0"
	SUBSYSTEMS=="usb"
	DRIVERS=="uvcvideo"
	ATTRS{bInterfaceClass}=="0e"
	ATTRS{iad_bFunctionClass}=="0e"
	ATTRS{iad_bFirstInterface}=="00"
	ATTRS{bInterfaceSubClass}=="01"
	ATTRS{bInterfaceProtocol}=="00"
	ATTRS{bNumEndpoints}=="01"
	ATTRS{iad_bFunctionSubClass}=="03"
	ATTRS{iad_bFunctionProtocol}=="00"
	ATTRS{supports_autosuspend}=="1"
	ATTRS{iad_bInterfaceCount}=="02"
	ATTRS{bAlternateSetting}==" 0"
	ATTRS{bInterfaceNumber}=="00"
	ATTRS{interface}=="WebCam"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1/1-4':
	KERNELS=="1-4"
	SUBSYSTEMS=="usb"
	DRIVERS=="usb"
	ATTRS{bDeviceSubClass}=="02"
	ATTRS{bDeviceProtocol}=="01"
	ATTRS{devpath}=="4"
	ATTRS{idVendor}=="0c45"
	ATTRS{speed}=="480"
	ATTRS{bNumInterfaces}==" 2"
	ATTRS{bConfigurationValue}=="1"
	ATTRS{bMaxPacketSize0}=="64"
	ATTRS{busnum}=="1"
	ATTRS{devnum}=="2"
	ATTRS{configuration}==""
	ATTRS{bMaxPower}=="98mA"
	ATTRS{authorized}=="1"
	ATTRS{bmAttributes}=="80"
	ATTRS{bNumConfigurations}=="1"
	ATTRS{maxchild}=="0"
	ATTRS{bcdDevice}=="0100"
	ATTRS{avoid_reset_quirk}=="0"
	ATTRS{quirks}=="0x0"
	ATTRS{version}==" 2.00"
	ATTRS{urbnum}=="2194837"
	ATTRS{ltm_capable}=="no"
	ATTRS{manufacturer}=="Sonix Technology Co., Ltd."
	ATTRS{removable}=="unknown"
	ATTRS{idProduct}=="62c0"
	ATTRS{bDeviceClass}=="ef"
	ATTRS{product}=="WebCam"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1':
	KERNELS=="usb1"
	SUBSYSTEMS=="usb"
	DRIVERS=="usb"
	ATTRS{bDeviceSubClass}=="00"
	ATTRS{bDeviceProtocol}=="00"
	ATTRS{devpath}=="0"
	ATTRS{idVendor}=="1d6b"
	ATTRS{speed}=="480"
	ATTRS{bNumInterfaces}==" 1"
	ATTRS{bConfigurationValue}=="1"
	ATTRS{bMaxPacketSize0}=="64"
	ATTRS{authorized_default}=="1"
	ATTRS{busnum}=="1"
	ATTRS{devnum}=="1"
	ATTRS{configuration}==""
	ATTRS{bMaxPower}=="0mA"
	ATTRS{authorized}=="1"
	ATTRS{bmAttributes}=="e0"
	ATTRS{bNumConfigurations}=="1"
	ATTRS{maxchild}=="8"
	ATTRS{bcdDevice}=="0316"
	ATTRS{avoid_reset_quirk}=="0"
	ATTRS{quirks}=="0x0"
	ATTRS{serial}=="0000:00:1d.7"
	ATTRS{version}==" 2.00"
	ATTRS{urbnum}=="63"
	ATTRS{ltm_capable}=="no"
	ATTRS{manufacturer}=="Linux 3.16.0-45-generic ehci_hcd"
	ATTRS{removable}=="unknown"
	ATTRS{idProduct}=="0002"
	ATTRS{bDeviceClass}=="09"
	ATTRS{product}=="EHCI Host Controller"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7':
	KERNELS=="0000:00:1d.7"
	SUBSYSTEMS=="pci"
	DRIVERS=="ehci-pci"
	ATTRS{irq}=="16"
	ATTRS{subsystem_vendor}=="0x1025"
	ATTRS{broken_parity_status}=="0"
	ATTRS{class}=="0x0c0320"
	ATTRS{companion}==""
	ATTRS{driver_override}=="(null)"
	ATTRS{consistent_dma_mask_bits}=="32"
	ATTRS{dma_mask_bits}=="32"
	ATTRS{local_cpus}=="ff"
	ATTRS{device}=="0x27cc"
	ATTRS{uframe_periodic_max}=="100"
	ATTRS{enable}=="1"
	ATTRS{msi_bus}==""
	ATTRS{local_cpulist}=="0-7"
	ATTRS{vendor}=="0x8086"
	ATTRS{subsystem_device}=="0x0349"
	ATTRS{d3cold_allowed}=="1"

  looking at parent device '/devices/pci0000:00':
	KERNELS=="pci0000:00"
	SUBSYSTEMS==""
	DRIVERS==""

und

Quellcode

sudo udevadm info --query=all --attribute-walk --name=/dev/video1

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/video4linux/video1':
	KERNEL=="video1"
	SUBSYSTEM=="video4linux"
	DRIVER==""
	ATTR{name}=="UVC Camera (046d:0825)"
	ATTR{debug}=="0"
	ATTR{index}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0':
	KERNELS=="1-2:1.0"
	SUBSYSTEMS=="usb"
	DRIVERS=="uvcvideo"
	ATTRS{bInterfaceClass}=="0e"
	ATTRS{iad_bFunctionClass}=="0e"
	ATTRS{iad_bFirstInterface}=="00"
	ATTRS{bInterfaceSubClass}=="01"
	ATTRS{bInterfaceProtocol}=="00"
	ATTRS{bNumEndpoints}=="01"
	ATTRS{iad_bFunctionSubClass}=="03"
	ATTRS{iad_bFunctionProtocol}=="00"
	ATTRS{supports_autosuspend}=="1"
	ATTRS{iad_bInterfaceCount}=="02"
	ATTRS{bAlternateSetting}==" 0"
	ATTRS{bInterfaceNumber}=="00"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1/1-2':
	KERNELS=="1-2"
	SUBSYSTEMS=="usb"
	DRIVERS=="usb"
	ATTRS{bDeviceSubClass}=="02"
	ATTRS{bDeviceProtocol}=="01"
	ATTRS{devpath}=="2"
	ATTRS{idVendor}=="046d"
	ATTRS{speed}=="480"
	ATTRS{bNumInterfaces}==" 4"
	ATTRS{bConfigurationValue}=="1"
	ATTRS{bMaxPacketSize0}=="64"
	ATTRS{busnum}=="1"
	ATTRS{devnum}=="4"
	ATTRS{configuration}==""
	ATTRS{bMaxPower}=="500mA"
	ATTRS{authorized}=="1"
	ATTRS{bmAttributes}=="80"
	ATTRS{bNumConfigurations}=="1"
	ATTRS{maxchild}=="0"
	ATTRS{bcdDevice}=="0010"
	ATTRS{avoid_reset_quirk}=="0"
	ATTRS{quirks}=="0x2"
	ATTRS{serial}=="78C16F10"
	ATTRS{version}==" 2.00"
	ATTRS{urbnum}=="1618"
	ATTRS{ltm_capable}=="no"
	ATTRS{removable}=="unknown"
	ATTRS{idProduct}=="0825"
	ATTRS{bDeviceClass}=="ef"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1':
	KERNELS=="usb1"
	SUBSYSTEMS=="usb"
	DRIVERS=="usb"
	ATTRS{bDeviceSubClass}=="00"
	ATTRS{bDeviceProtocol}=="00"
	ATTRS{devpath}=="0"
	ATTRS{idVendor}=="1d6b"
	ATTRS{speed}=="480"
	ATTRS{bNumInterfaces}==" 1"
	ATTRS{bConfigurationValue}=="1"
	ATTRS{bMaxPacketSize0}=="64"
	ATTRS{authorized_default}=="1"
	ATTRS{busnum}=="1"
	ATTRS{devnum}=="1"
	ATTRS{configuration}==""
	ATTRS{bMaxPower}=="0mA"
	ATTRS{authorized}=="1"
	ATTRS{bmAttributes}=="e0"
	ATTRS{bNumConfigurations}=="1"
	ATTRS{maxchild}=="8"
	ATTRS{bcdDevice}=="0316"
	ATTRS{avoid_reset_quirk}=="0"
	ATTRS{quirks}=="0x0"
	ATTRS{serial}=="0000:00:1d.7"
	ATTRS{version}==" 2.00"
	ATTRS{urbnum}=="63"
	ATTRS{ltm_capable}=="no"
	ATTRS{manufacturer}=="Linux 3.16.0-45-generic ehci_hcd"
	ATTRS{removable}=="unknown"
	ATTRS{idProduct}=="0002"
	ATTRS{bDeviceClass}=="09"
	ATTRS{product}=="EHCI Host Controller"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7':
	KERNELS=="0000:00:1d.7"
	SUBSYSTEMS=="pci"
	DRIVERS=="ehci-pci"
	ATTRS{irq}=="16"
	ATTRS{subsystem_vendor}=="0x1025"
	ATTRS{broken_parity_status}=="0"
	ATTRS{class}=="0x0c0320"
	ATTRS{companion}==""
	ATTRS{driver_override}=="(null)"
	ATTRS{consistent_dma_mask_bits}=="32"
	ATTRS{dma_mask_bits}=="32"
	ATTRS{local_cpus}=="ff"
	ATTRS{device}=="0x27cc"
	ATTRS{uframe_periodic_max}=="100"
	ATTRS{enable}=="1"
	ATTRS{msi_bus}==""
	ATTRS{local_cpulist}=="0-7"
	ATTRS{vendor}=="0x8086"
	ATTRS{subsystem_device}=="0x0349"
	ATTRS{d3cold_allowed}=="1"

  looking at parent device '/devices/pci0000:00':
	KERNELS=="pci0000:00"
	SUBSYSTEMS==""
	DRIVERS==""

micky@sirius:~$ clear
micky@sirius:~$ sudo udevadm info --query=all --attribute-walk --name=/dev/video1

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/video4linux/video1':
	KERNEL=="video1"
	SUBSYSTEM=="video4linux"
	DRIVER==""
	ATTR{name}=="UVC Camera (046d:0825)"
	ATTR{debug}=="0"
	ATTR{index}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0':
	KERNELS=="1-2:1.0"
	SUBSYSTEMS=="usb"
	DRIVERS=="uvcvideo"
	ATTRS{bInterfaceClass}=="0e"
	ATTRS{iad_bFunctionClass}=="0e"
	ATTRS{iad_bFirstInterface}=="00"
	ATTRS{bInterfaceSubClass}=="01"
	ATTRS{bInterfaceProtocol}=="00"
	ATTRS{bNumEndpoints}=="01"
	ATTRS{iad_bFunctionSubClass}=="03"
	ATTRS{iad_bFunctionProtocol}=="00"
	ATTRS{supports_autosuspend}=="1"
	ATTRS{iad_bInterfaceCount}=="02"
	ATTRS{bAlternateSetting}==" 0"
	ATTRS{bInterfaceNumber}=="00"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1/1-2':
	KERNELS=="1-2"
	SUBSYSTEMS=="usb"
	DRIVERS=="usb"
	ATTRS{bDeviceSubClass}=="02"
	ATTRS{bDeviceProtocol}=="01"
	ATTRS{devpath}=="2"
	ATTRS{idVendor}=="046d"
	ATTRS{speed}=="480"
	ATTRS{bNumInterfaces}==" 4"
	ATTRS{bConfigurationValue}=="1"
	ATTRS{bMaxPacketSize0}=="64"
	ATTRS{busnum}=="1"
	ATTRS{devnum}=="4"
	ATTRS{configuration}==""
	ATTRS{bMaxPower}=="500mA"
	ATTRS{authorized}=="1"
	ATTRS{bmAttributes}=="80"
	ATTRS{bNumConfigurations}=="1"
	ATTRS{maxchild}=="0"
	ATTRS{bcdDevice}=="0010"
	ATTRS{avoid_reset_quirk}=="0"
	ATTRS{quirks}=="0x2"
	ATTRS{serial}=="78C16F10"
	ATTRS{version}==" 2.00"
	ATTRS{urbnum}=="1624"
	ATTRS{ltm_capable}=="no"
	ATTRS{removable}=="unknown"
	ATTRS{idProduct}=="0825"
	ATTRS{bDeviceClass}=="ef"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1':
	KERNELS=="usb1"
	SUBSYSTEMS=="usb"
	DRIVERS=="usb"
	ATTRS{bDeviceSubClass}=="00"
	ATTRS{bDeviceProtocol}=="00"
	ATTRS{devpath}=="0"
	ATTRS{idVendor}=="1d6b"
	ATTRS{speed}=="480"
	ATTRS{bNumInterfaces}==" 1"
	ATTRS{bConfigurationValue}=="1"
	ATTRS{bMaxPacketSize0}=="64"
	ATTRS{authorized_default}=="1"
	ATTRS{busnum}=="1"
	ATTRS{devnum}=="1"
	ATTRS{configuration}==""
	ATTRS{bMaxPower}=="0mA"
	ATTRS{authorized}=="1"
	ATTRS{bmAttributes}=="e0"
	ATTRS{bNumConfigurations}=="1"
	ATTRS{maxchild}=="8"
	ATTRS{bcdDevice}=="0316"
	ATTRS{avoid_reset_quirk}=="0"
	ATTRS{quirks}=="0x0"
	ATTRS{serial}=="0000:00:1d.7"
	ATTRS{version}==" 2.00"
	ATTRS{urbnum}=="63"
	ATTRS{ltm_capable}=="no"
	ATTRS{manufacturer}=="Linux 3.16.0-45-generic ehci_hcd"
	ATTRS{removable}=="unknown"
	ATTRS{idProduct}=="0002"
	ATTRS{bDeviceClass}=="09"
	ATTRS{product}=="EHCI Host Controller"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7':
	KERNELS=="0000:00:1d.7"
	SUBSYSTEMS=="pci"
	DRIVERS=="ehci-pci"
	ATTRS{irq}=="16"
	ATTRS{subsystem_vendor}=="0x1025"
	ATTRS{broken_parity_status}=="0"
	ATTRS{class}=="0x0c0320"
	ATTRS{companion}==""
	ATTRS{driver_override}=="(null)"
	ATTRS{consistent_dma_mask_bits}=="32"
	ATTRS{dma_mask_bits}=="32"
	ATTRS{local_cpus}=="ff"
	ATTRS{device}=="0x27cc"
	ATTRS{uframe_periodic_max}=="100"
	ATTRS{enable}=="1"
	ATTRS{msi_bus}==""
	ATTRS{local_cpulist}=="0-7"
	ATTRS{vendor}=="0x8086"
	ATTRS{subsystem_device}=="0x0349"
	ATTRS{d3cold_allowed}=="1"

  looking at parent device '/devices/pci0000:00':
	KERNELS=="pci0000:00"
	SUBSYSTEMS==""
	DRIVERS==""

Woran könnte das liegen bzw wie kann ich die regeln überprüfen auf error msg oder so bzw wieso wird Standardmäßig nur eine webcam erkannt und benutzt.
falls zusätzliche Infos gebraucht werden kann ich diese natürlich nachreichen
Danke vielmals

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »giviflo« (12.08.2015, 14:01)

Zum Seitenanfang

giviflo

User

Beiträge: 2

Registrierungsdatum: 12.08.2015

Derivat: Kubuntu

Architektur: 64-Bit PC

Desktop: unbekannt

Andere Betriebssysteme: Server

12.08.2015, 19:32

hab jetzt noch bissel was modifiziert indem ich die rules nach 00Logitech und 01Intern umbenannt habe

und bei udevd --debug kommt kein fehler trotzdem wird im dev kein /webcam1 und webcam2 angelegt
hab ich was an der Syntax falsch gemacht, da es gar nicht zu gehen scheint.
selbst die aktuell laufende kamera ist noch unter video0 bzw video1 aufzufinden

Quellcode

sudo udevd --debug
[sudo] password for micky: 
mknod '/dev/cuse' c10:203
mknod '/dev/autofs' c10:235
mknod '/dev/btrfs-control' c10:234
mknod '/dev/vfio/vfio' c10:196
mknod '/dev/vhci' c10:137
mknod '/dev/uhid' c10:239
mknod '/dev/vhost-net' c10:238
mknod '/dev/snd/timer' c116:33
mknod '/dev/snd/seq' c116:1
device 0x958f588 has devpath '/devices/pci0000:00/0000:00:1f.2/ata1/host1/target1:0:0/1:0:0:0/block/sda/sda2'
restoring old watch on '/dev/sda2'
adding watch on '/dev/sda2'
device 0x958f588 has devpath '/devices/pci0000:00/0000:00:1f.2/ata1/host1/target1:0:0/1:0:0:0/block/sda/sda1'
restoring old watch on '/dev/sda1'
adding watch on '/dev/sda1'
device 0x958f588 has devpath '/devices/pci0000:00/0000:00:1f.2/ata1/host1/target1:0:0/1:0:0:0/block/sda'
restoring old watch on '/dev/sda'
adding watch on '/dev/sda'
device 0x958f588 has devpath '/devices/virtual/block/ram8'
restoring old watch on '/dev/ram8'
adding watch on '/dev/ram8'
device 0x958f588 has devpath '/devices/virtual/block/ram9'
restoring old watch on '/dev/ram9'
adding watch on '/dev/ram9'
device 0x958f588 has devpath '/devices/virtual/block/ram7'
restoring old watch on '/dev/ram7'
adding watch on '/dev/ram7'
device 0x958f588 has devpath '/devices/virtual/block/ram5'
restoring old watch on '/dev/ram5'
adding watch on '/dev/ram5'
device 0x958f588 has devpath '/devices/virtual/block/ram6'
restoring old watch on '/dev/ram6'
adding watch on '/dev/ram6'
device 0x958f588 has devpath '/devices/virtual/block/ram4'
restoring old watch on '/dev/ram4'
adding watch on '/dev/ram4'
device 0x958f588 has devpath '/devices/virtual/block/ram3'
restoring old watch on '/dev/ram3'
adding watch on '/dev/ram3'
device 0x958f588 has devpath '/devices/virtual/block/ram2'
restoring old watch on '/dev/ram2'
adding watch on '/dev/ram2'
device 0x958f588 has devpath '/devices/virtual/block/ram15'
restoring old watch on '/dev/ram15'
adding watch on '/dev/ram15'
device 0x958f588 has devpath '/devices/virtual/block/ram14'
restoring old watch on '/dev/ram14'
adding watch on '/dev/ram14'
device 0x958f588 has devpath '/devices/virtual/block/ram12'
restoring old watch on '/dev/ram12'
adding watch on '/dev/ram12'
device 0x958f588 has devpath '/devices/virtual/block/loop1'
restoring old watch on '/dev/loop1'
adding watch on '/dev/loop1'
=== trie on-disk ===
tool version:      	204
file size:     	5661386 bytes
header size         	80 bytes
strings        	1265626 bytes
nodes          	4395680 bytes
load module index
read rules file: /etc/udev/rules.d/00webcamLogitech.rules
read rules file: /etc/udev/rules.d/01webcamIntern.rules
read rules file: /lib/udev/rules.d/40-crda.rules
read rules file: /lib/udev/rules.d/40-gnupg.rules
read rules file: /lib/udev/rules.d/40-hyperv-hotadd.rules
read rules file: /lib/udev/rules.d/42-usb-hid-pm.rules
read rules file: /lib/udev/rules.d/50-firmware.rules
read rules file: /lib/udev/rules.d/50-udev-default.rules
read rules file: /lib/udev/rules.d/55-dm.rules
read rules file: /lib/udev/rules.d/60-cdrom_id.rules
read rules file: /lib/udev/rules.d/60-keyboard.rules
read rules file: /lib/udev/rules.d/60-persistent-alsa.rules
read rules file: /lib/udev/rules.d/60-persistent-input.rules
read rules file: /lib/udev/rules.d/60-persistent-serial.rules
read rules file: /lib/udev/rules.d/60-persistent-storage-dm.rules
read rules file: /lib/udev/rules.d/60-persistent-storage-tape.rules
read rules file: /lib/udev/rules.d/60-persistent-storage.rules
read rules file: /lib/udev/rules.d/60-persistent-v4l.rules
read rules file: /lib/udev/rules.d/61-accelerometer.rules
read rules file: /lib/udev/rules.d/62-google-cloudimg.rules
read rules file: /lib/udev/rules.d/64-btrfs.rules
read rules file: /etc/udev/rules.d/70-persistent-net.rules
read rules file: /lib/udev/rules.d/70-power-switch.rules
read rules file: /lib/udev/rules.d/70-uaccess.rules
read rules file: /lib/udev/rules.d/71-biosdevname.rules
read rules file: /lib/udev/rules.d/71-seat.rules
read rules file: /lib/udev/rules.d/73-idrac.rules
read rules file: /lib/udev/rules.d/73-seat-late.rules
read rules file: /lib/udev/rules.d/75-net-description.rules
read rules file: /lib/udev/rules.d/75-persistent-net-generator.rules
read rules file: /lib/udev/rules.d/75-probe_mtd.rules
read rules file: /lib/udev/rules.d/75-tty-description.rules
read rules file: /lib/udev/rules.d/78-graphics-card.rules
read rules file: /lib/udev/rules.d/78-sound-card.rules
read rules file: /lib/udev/rules.d/80-drivers.rules
read rules file: /lib/udev/rules.d/85-hdparm.rules
read rules file: /lib/udev/rules.d/85-keyboard-configuration.rules
read rules file: /lib/udev/rules.d/85-regulatory.rules
read rules file: /lib/udev/rules.d/95-udev-late.rules
rules contain 24576 bytes tokens (2048 * 12 bytes), 11508 bytes strings
1843 strings (22351 bytes), 1198 de-duplicated (11489 bytes), 646 trie nodes used
set children_max to 12
^X^Cvalidate module index
unload module index

Ein großes Dankeschön schonmal vorab

Zum Seitenanfang

Ubuntu-Forum & Kubuntu-Forum | www.Ubuntu-Forum.de