Sie sind nicht angemeldet.

Lieber Besucher, herzlich willkommen bei: Ubuntu-Forum & Kubuntu-Forum | www.Ubuntu-Forum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

1

05.11.2014, 15:57

ubuntu startet nicht

Bin Neuling in der Welt von Linux. Habe mir Ubuntu 14.04 auf meinm Laptop installieren (Acer Aspire 1810TZ). Leider bekomme ich beim starten immer folgende Meldung:
Gave up witing for root device. Common problems:
-Boot args (cat/proc/cmdline)
-Check root= (did the system wait long enough?)
- missing modules (cat/proc/modules; ls/dev)
ALERT: /dev/disk/by-uuid/**** does not exist. Dropping to a shell!

Habe die Partitionierung auch schon manuel erstellt und es funktioniert trotzdem nicht immer die selbe Fehlermeldung! Was kann ich tun?

Christian

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

2

05.11.2014, 17:35

Hallo Christian!

ist da noch ein anderes Betriebssystem mit auf dem Rechner drauf?

Ist das BIOS korrekt eingestellt, so dass von der Platte gebootet wird, wenn kein anderes bootfähiges Medium dran hängt?

Gruß

Klaus P
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

3

05.11.2014, 18:56

Hallo Klaus,
es ist kein anderes Betriebssystem mehr vorhanden. Früher war Windows 7 drauf. Habe die gesamte Platte formatiert. Bios startet auch von der Platte.
Grüße,
Christian

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

4

05.11.2014, 19:11

OK!

Versuchen wir mal folgendes: Starte noch mal die Installations-CD/DVD (oder Stick), gehe zunächst in den Live-CD Modus (ubuntu ausprobieren). Wenn das OS geladen ist, startest du den Partitionierer Gparted, gehts oben in der Menüleiste auf "Laufwerk" und wählst "neue Partionstabelle". Damit wird die ganze Platte incl. des Bootloaderbereichs (MBR) platt gemacht. Alle Daten sind dann natürlich weg!
Ab hier kannst du, wenn du willst schon mal neu partitionieren oder du startest gleich direkt aus der Livesession heraus die Installation. Ein Symbol dafür findet sich je nach *buntuversion entweder bereits auf dem Desktop oder in der Seitenleiste (z.B. bei Standardubuntu). Nun kannst du die automatische Installation wählen oder über den Punkt "Etwas anderes" die manuelle Installation. Hierbei entweder die bereits vorher festgelegten Partitionen noch mal die Funktion zuweisen oder eben neu erstellen nach deinem Gusto. Infos dazu siehe ggf. unser WIKI zu Installation.

Gruß

Klaus P
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

5

06.11.2014, 13:01

Hallo Klaus,
habe gparted gestartet und "neue Partitationstabelle" ausgewählt. Wollte auch in gparted die Partitatitationen erstellen konnte sie aber nicht einhängen. Habe danach die Installtation gestartet und aus der Installation einmal manuell Partitioniert und einmal nur Ubuntu installieren ausgewählt. Leider konnte bei beiden nach der Installation das System nicht gestartet werden. Habe im Live Modus auch eine Meldung bekommen das dev/sda die Nummer 0 hat und damit falsch nummeriert ist ? Konnte leider nichts damit anfangen. Aus dem Live Modus kann isch auf die Laufwerke zugreifen. Bin langsam am verzweifeln, möchte aber nicht aufgeben.

Grüße,
Christian

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

6

06.11.2014, 14:21

Hallo Christian!

Die obige Fehlermeldung kommt nicht mehr?

Irgendwie ist bei deiner Platte der Wurm drin! Starte bitte noch mal die Live-CD, diesmal öffnest du das Terminal (am schnellsten mit STRG + ALT + T) und gibst die folgenden beiden Befehle ein

Quellcode

1
2
sudo parted -l
sudo fdisk -l

(-l = kleines L). Die Terminalausgaben hier einstellen.Die Ausgaben geben detaillierte Auskunft über Plattenbelegung etc.

Was du noch mal machen könntest, wäre dir die kleine SuperGrubDisk2 als bootfähige CD erstellen, davon booten und dann den Punkt "detect any OS" oder so ähnlich wählen und schauen, ob ein installiertes Betriebssystem gefunden wird und ggf. auch gestartet wird. Obwohl ich fast denke, dass das nicht klappt, aber Versuch macht ja bekanntlich "kluuch".

Gruß

Klaus P
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

7

06.11.2014, 17:47

Hallo Klaus,
die Fehlermeldung ist die gleiche wie zu Beginn:

Hier das Ergebnis der Abfragen:

ubuntu@ubuntu:~$ sudo parted -l
Modell: ATA Hitachi HTS54503 (scsi)
Festplatte /dev/sda: 320GB
Sektorgröße (logisch/physisch): 512B/512B
Partitionstabelle: msdos

Nummer Anfang Ende Größe Typ Dateisystem Flags
1 1049kB 317GB 317GB primary ext4 boot
2 317GB 320GB 3148MB extended
5 317GB 320GB 3148MB logical linux-swap(v1)

ubuntu@ubuntu:~$ sudo fdisk -l

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 Köpfe, 63 Sektoren/Spur, 38913 Zylinder, zusammen 625142448 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Festplattenidentifikation: 0x000b51d3

Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 2048 618991615 309494784 83 Linux
/dev/sda2 618993662 625141759 3074049 5 Erweiterte
/dev/sda5 618993664 625141759 3074048 82 Linux Swap / Solaris

Aus meiner Sicht nichts auffälliges bin aber kein Profi.

Grüße,
Christian

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

8

06.11.2014, 17:53

Auch aus meiner Sicht nichts auffälliges, aber ich bin auch kein Profi!

Hast du mal versucht mit der SuperGrubDisk2 dein Ubuntu zu starten?

Gruß

Klaus P
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

9

06.11.2014, 18:03

Habe leider kein CD-Laufwerk!
Grüße,
Christian

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

10

06.11.2014, 18:07

In dem Fall, halt einen bootfähigen Stick damit erstellen, falls möglich!

Aber Unabhängig davon bitte auch noch mal die Ausgabe des Befehls

Quellcode

1
sudo blkid
und den Inhalt der Datei
Dateisystem/etc/fstab
hier posten. Bei letzterem darauf achten, dass du nicht die Datei aus dem Livesystem nimmst, sondern die der richtigen Installation, die du mit dem Dateibrowser der Livesession aussuchen kannst.

Gruß

Klaus P
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

11

06.11.2014, 18:15

Hallo Klaus,
hier die Ergebnisse der Abfragen:

ubuntu@ubuntu:~$ sudo blkid
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="292dc054-20c1-47c7-b9ac-cddc387d3331" TYPE="ext4"
/dev/sda5: UUID="4e6b2369-2876-4253-8f9e-507ee1399811" TYPE="swap"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="7CDA-D66E" TYPE="vfat"


Fileinhalt:

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=292dc054-20c1-47c7-b9ac-cddc387d3331 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=4e6b2369-2876-4253-8f9e-507ee1399811 none swap sw 0 0

Grüße,
Christian

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

12

06.11.2014, 18:59

Hallo!

Etwas Recherche meint, dass man das folgendermaßen beheben könnte. Also probieren wir es!

Wieder die Livesession starten und das Terminal öffnen. Dann nacheinander folgende Befehlskette eingeben. Benutze bitte Copy + Paste und nicht abtippen! Das macht nur Fehler.

Quellcode

1
2
3
4
5
6
7
8
sudo mount /dev/sda1 /mnt
sudo mount --bind /dev /mnt/dev
sudo mount --bind /proc /mnt/proc
sudo mount --bind /sys /mnt/sys
sudo chroot /mnt
update-initramfs -u
update-grub
reboot



Gruß

Klaus P
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

13

06.11.2014, 22:12

Hallo Klaus,
habe das wie vorgeschlagen durchgeführt. Hier die Aktion:

ubuntu@ubuntu:~$ sudo mount /dev/sda1 /mnt
ubuntu@ubuntu:~$ sudo mount --bind /dev /mnt/dev
ubuntu@ubuntu:~$ sudo mount --bind /proc /mnt/proc
ubuntu@ubuntu:~$ sudo mount --bind /sys /mnt/sys
ubuntu@ubuntu:~$ sudo chroot /mnt
root@ubuntu:/# update-initramfs -u
update-initramfs: Generating /boot/initrd.img-3.13.0-24-generic
root@ubuntu:/# update-grub
Grub-Konfigurationsdatei wird generiert …
Warnung: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.
Linux-Abbild gefunden: /boot/vmlinuz-3.13.0-24-generic
initrd-Abbild gefunden: /boot/initrd.img-3.13.0-24-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
erledigt
root@ubuntu:/# reboot^C
root@ubuntu:/#

Leider habe ich beim Neustart wieder die gleiche Fehlermeldung wie gehabt. Werde morgen die SuerGrubDisk2 ausprobieren.
Grüße,
Christian

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

14

06.11.2014, 22:40

Mach das!

Das OS ist jedenfalls vorhanden lt. dieser Ausgabe.

Nur selbst wenn das Ding dann startet, haben wir das eigentliche Problem immer noch nicht gelöst. Und da fische ich gerade etwas im Trüben.

Vielleicht hat ja einer der Kollegen zwischenzeitlich eine bessere Idee.

Gruß

Klaus P
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

15

07.11.2014, 14:25

Habe die Festplatte neu partitioniert mit der Live-Version von gparted. Ubuntu 14.04 neu installiert. Startversuch - Wieder negativ. Danach booten mit SuperGrubDisk2 - Ubutu-Betriebssystem starten, bliebt hängen-
die letzten 3 Zeilen:

ata1.00: device reported invalod CHS sector 0
ata1: EH complete
random: nonblocking pool is initilized

Grüße,
CHristian

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

16

07.11.2014, 15:00

Hallo Christian!

Sorry, ich bin außen vor. Hoffe, dass sich noch mal jemand mit einem Lösungsvorschlag meldet!

Gruß

Klaus P
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

wowi

Ubuntu-Forum-Team

  • »wowi« ist männlich

Beiträge: 4 264

Registrierungsdatum: 03.05.2007

Derivat: Xubuntu

Architektur: 64-Bit PC

Desktop: XFCE

  • Nachricht senden

17

08.11.2014, 00:24

Hi Christian64,

laut Deinem Profil versuchst Du die AMD64-Version zu installieren!?
Probiere es einfach mal mit der i386-Version! Ich hatte die letzten Tage auch eine Menge unerklärliche Probleme auf einem PC, die dann plötzlich weg waren, als ich die i386 dann installiert habe :thumbup:

Greetz
wowi

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

18

08.11.2014, 08:36

Habe eine Bootreparatur durchgeführt (leider hat es nicht mein Problem gelöst) und dabei folgendes Protokoll erhalten. Vieleicht kann jemand damit was Anfangen:
Was mir komisch vorkommt, dass bei dev/sd1 als Mountpoint /cdrom steht (siehe unten), kann das richtig sein?
Grüße,
Christian

Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

File system: Extended Partition
Boot sector type: Unknown
Boot sector info:

sda5: __________________________________________________________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:

sda6: __________________________________________________________________________

File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sda7: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________________________________

File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 2017320 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 2,048 245,761,813 245,759,766 83 Linux
/dev/sda2 245,764,094 625,141,759 379,377,666 5 Extended
/dev/sda5 258,054,144 503,814,143 245,760,000 83 Linux
/dev/sda6 503,816,192 625,141,759 121,325,568 b W95 FAT32
/dev/sda7 245,764,096 258,054,143 12,290,048 82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 8053 MB, 8053063680 bytes
256 heads, 60 sectors/track, 1024 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sdb1 * 2,136 15,728,639 15,726,504 b W95 FAT32


"blkid" output: ________________________________________________________________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/sda1 c55bd756-e00e-4c64-81f1-e2e9584ccba4 ext4
/dev/sda5 f9b8ca03-5756-40f6-9b64-4fee6ae17f95 ext4
/dev/sda6 1D6D-E4A8 vfat
/dev/sda7 de4ca869-5409-4fb5-998c-65723a26b828 swap
/dev/sdb1 7CDA-D66E vfat MYLINUXLIVE

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}

if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 c55bd756-e00e-4c64-81f1-e2e9584ccba4
else
search --no-floppy --fs-uuid --set=root c55bd756-e00e-4c64-81f1-e2e9584ccba4
fi
font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=de_DE
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c55bd756-e00e-4c64-81f1-e2e9584ccba4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 c55bd756-e00e-4c64-81f1-e2e9584ccba4
else
search --no-floppy --fs-uuid --set=root c55bd756-e00e-4c64-81f1-e2e9584ccba4
fi
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=c55bd756-e00e-4c64-81f1-e2e9584ccba4 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-24-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-c55bd756-e00e-4c64-81f1-e2e9584ccba4' {
menuentry 'Ubuntu, with Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-c55bd756-e00e-4c64-81f1-e2e9584ccba4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 c55bd756-e00e-4c64-81f1-e2e9584ccba4
else
search --no-floppy --fs-uuid --set=root c55bd756-e00e-4c64-81f1-e2e9584ccba4
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=c55bd756-e00e-4c64-81f1-e2e9584ccba4 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-c55bd756-e00e-4c64-81f1-e2e9584ccba4' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 c55bd756-e00e-4c64-81f1-e2e9584ccba4
else
search --no-floppy --fs-uuid --set=root c55bd756-e00e-4c64-81f1-e2e9584ccba4
fi
echo 'Loading Linux 3.13.0-24-generic ...'
linux /boot/vmlinuz-3.13.0-24-generic root=UUID=c55bd756-e00e-4c64-81f1-e2e9584ccba4 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-24-generic
}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 c55bd756-e00e-4c64-81f1-e2e9584ccba4
else
search --no-floppy --fs-uuid --set=root c55bd756-e00e-4c64-81f1-e2e9584ccba4
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 c55bd756-e00e-4c64-81f1-e2e9584ccba4
else
search --no-floppy --fs-uuid --set=root c55bd756-e00e-4c64-81f1-e2e9584ccba4
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=c55bd756-e00e-4c64-81f1-e2e9584ccba4 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=f9b8ca03-5756-40f6-9b64-4fee6ae17f95 /home ext4 defaults 0 2
# swap was on /dev/sda7 during installation
UUID=de4ca869-5409-4fb5-998c-65723a26b828 none swap sw 0 0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)


========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------

================= sdb1: Location of files loaded by Syslinux: ==================

GiB - GB File Fragment(s)


============== sdb1: Version of COM32(R) files used by Syslinux: ===============

syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2

00000000 c1 15 dd df be 4b 31 ce fe 49 61 80 dc a7 b5 bf |.....K1..Ia.....|
00000010 5e ae 6b bb fc 23 e3 86 1d dd ea 2b 7b f0 5d cb |^.k..#.....+{.].|
00000020 86 9e 75 a9 1b bb b9 f0 49 9b 1b 3c 3c b9 d7 e2 |..u.....I..<<...|
00000030 ae ee ef 77 f3 5a ba 07 66 a4 bd f3 5d db 4f 4a |...w.Z..f...].OJ|
00000040 b8 24 bc b1 4d fe 2f 2d 2f 97 1f c1 75 ac ac 35 |.$..M./-/...u..5|
00000050 22 2b fc 10 c3 c9 f2 d2 b1 4e 2d 5c a4 bc b4 4b |"+.......N-\...K|
00000060 c1 26 36 e0 7a 3d 77 05 92 fe e8 d1 98 ec 07 7c |.&6.z=w........||
00000070 c6 cc b7 af 87 c1 4f 3c 02 c9 b1 dd 50 26 f6 67 |......O<....P&.g|
00000080 df 7c 10 cb 8f 76 3e 2a 5c 2e 5a 74 df b6 33 8f |.|...v>*\.Zt..3.|
00000090 60 b8 2e f6 ed ed cb 7d de e9 51 9b 61 4a 6e 32 |`......}..Q.aJn2|
000000a0 5a 50 71 2f 8c 67 6e 93 86 5f fd ff 5f 17 7b bd |ZPq/.gn.._.._.{.|
000000b0 c6 99 9e ff 04 d7 1f 63 e8 4e 7f df 08 de ee e1 |.......c.N......|
000000c0 4e 7b 39 20 f6 cb d5 fe 3a fc 34 ba 87 7c f9 da |N{9 ....:.4..|..|
000000d0 3c a5 f2 11 34 56 20 23 cb cf 02 c4 77 61 84 fa |<...4V #....wa..|
000000e0 3b ab 2e fc 14 e0 ef 48 51 88 2e 5b 31 b0 dc f8 |;......HQ..[1...|
000000f0 c7 c4 6c e4 d7 40 ec 65 7c 7d 22 fb e1 d6 f8 2b |..l..@.e|}"....+|
00000100 0f 48 04 fa d2 9d 9e fe 09 23 39 f0 57 f8 fd e7 |.H.......#9.W...|
00000110 b2 e4 dd a9 b5 6d 0a 72 97 9a a5 b0 ed cf 96 69 |.....m.r.......i|
00000120 d6 e0 d9 b4 9b 0f d2 41 35 1f a6 8f e9 2c 15 dc |.......A5....,..|
00000130 47 79 63 6d 03 6a de b2 fa a2 5d 82 ae 00 ff ba |Gycm.j....].....|
00000140 b9 d7 a0 31 96 45 10 90 de 95 b1 d6 3b 8c 17 d2 |...1.E......;...|
00000150 4a 3f 37 6f ad 13 d5 24 6e f2 af 41 bb 0f c6 78 |J?7o...$n..A...x|
00000160 46 e5 bb 29 bc 60 a9 15 6e 83 a4 fa 0f 75 51 fc |F..).`..n....uQ.|
00000170 13 61 33 7a 6d d3 ca cc c7 1f a8 2d e1 f5 6f c8 |.a3zm......-..o.|
00000180 ba 79 f9 20 b6 74 97 da 61 87 1a 6c 7f 05 17 76 |.y. .t..a..l...v|
00000190 b7 2e 69 55 9d d8 47 b9 d3 6e 93 a0 6b 4e 3f cd |..iU..G..n..kN?.|
000001a0 d8 46 8d aa 82 69 f3 74 47 ce 82 f7 c5 5e 73 b3 |.F...i.tG....^s.|
000001b0 c1 15 bf 1d 64 93 87 d4 c7 d3 72 a0 e9 15 00 fe |....d.....r.....|
000001c0 ff ff 83 fe ff ff 02 88 bb 00 00 00 a6 0e 00 fe |................|
000001d0 ff ff 05 fe ff ff 43 89 61 0f bf 4e 3b 07 00 00 |......C.a..N;...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200


=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-HSYsOKI3/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-HSYsOKI3/Tmp_Log: No such file or directory
File descriptor 9 (/proc/6332/mounts) leaked on lvscan invocation. Parent PID 15153: bash
File descriptor 63 (pipe:[50158]) leaked on lvscan invocation. Parent PID 15153: bash
No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-11-07__14h11 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04 LTS, trusty, Ubuntu, i686)
ls: Zugriff auf /home/usr/.config nicht möglich: Datei oder Verzeichnis nicht gefunden
CPU op-mode(s): 32-bit, 64-bit
bootkbd=de console-setup/layoutcode=de console-setup/variantcode=nodeadkeys locale=de_DE noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- maybe-ubiquity

=================== os-prober:
/dev/sda1:Ubuntu 14.04 LTS (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="c55bd756-e00e-4c64-81f1-e2e9584ccba4" TYPE="ext4"
/dev/sda5: UUID="f9b8ca03-5756-40f6-9b64-4fee6ae17f95" TYPE="ext4"
/dev/sda6: UUID="1D6D-E4A8" TYPE="vfat"
/dev/sda7: UUID="de4ca869-5409-4fb5-998c-65723a26b828" TYPE="swap"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="7CDA-D66E" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Warnung: erweiterte Partition beginnt nicht an einer Zylindergrenze
DOS und Linux werden den Inhalt unterschiedlich interpretieren.

=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Apr 17 2014 grub.d
insgesamt 76
-rwxr-xr-x 1 root root 9424 Apr 11 2014 00_header
-rwxr-xr-x 1 root root 6058 Apr 10 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 2014 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mär 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apr 11 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 Apr 11 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 11 2014 40_custom
-rwxr-xr-x 1 root root 216 Apr 11 2014 41_custom
-rw-r--r-- 1 root root 483 Apr 11 2014 README




=================== sda1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda1recordfail=1/grub/grubenv :
recordfail=1



=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.

sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes


=================== parted -l:

Model: ATA Hitachi HTS54503 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number Start End Size Type File system Flags
1 1049kB 126GB 126GB primary ext4 boot
2 126GB 320GB 194GB extended
7 126GB 132GB 6293MB logical linux-swap(v1)
5 132GB 258GB 126GB logical ext4
6 258GB 320GB 62.1GB logical fat32


Model: USB2.0 Flash Disk (scsi)
Disk /dev/sdb: 8053MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number Start End Size Type File system Flags
1 1094kB 8053MB 8052MB primary fat32 boot

=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:512:msdos:ATA Hitachi HTS54503;
1:1049kB:126GB:126GB:ext4::boot;
2:126GB:320GB:194GB:::;
7:126GB:132GB:6293MB:linux-swap(v1)::;
5:132GB:258GB:126GB:ext4::;
6:258GB:320GB:62.1GB:fat32::;

BYT;
/dev/sdb:8053MB:scsi:512:512:msdos:USB2.0 Flash Disk;
1:1094kB:8053MB:8052MB:fat32::boot;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
/dev/sda6 on /mnt/boot-sav/sda6 type vfat (rw)


=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sda7 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper: control

=================== hexdump -n512 -C /dev/sda6
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 40 20 00 |.X.mkfs.fat..@ .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 a0 07 1e |........?.......|
00000020 00 48 3b 07 d7 39 00 00 00 00 00 00 02 00 00 00 |.H;..9..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 a8 e4 6d 1d 20 20 20 20 20 20 20 20 20 |..)..m. |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200

=================== df -Th:

Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.5G 120M 1.4G 9% /
udev devtmpfs 1.5G 12K 1.5G 1% /dev
tmpfs tmpfs 297M 1.1M 296M 1% /run
/dev/sdb1 vfat 7.5G 1.1G 6.4G 15% /cdrom
/dev/loop0 squashfs 936M 936M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.5G 28K 1.5G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 1.5G 80K 1.5G 1% /run/shm
none tmpfs 100M 60K 100M 1% /run/user
/dev/sda1 ext4 116G 3.8G 106G 4% /mnt/boot-sav/sda1
/dev/sda5 ext4 116G 60M 110G 1% /mnt/boot-sav/sda5
/dev/sda6 vfat 58G 32K 58G 1% /mnt/boot-sav/sda6

=================== fdisk -l:

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf08c8121

Device Boot Start End Blocks Id System
/dev/sda1 * 2048 245761813 122879883 83 Linux
/dev/sda2 245764094 625141759 189688833 5 Extended
/dev/sda5 258054144 503814143 122880000 83 Linux
/dev/sda6 503816192 625141759 60662784 b W95 FAT32
/dev/sda7 245764096 258054143 6145024 82 Linux swap / Solaris

Partition table entries are not in disk order

Disk /dev/sdb: 8053 MB, 8053063680 bytes
256 heads, 60 sectors/track, 1024 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18

Device Boot Start End Blocks Id System
/dev/sdb1 * 2136 15728639 7863252 b W95 FAT32



=================== Recommended repair
Recommended-Repair
This setting will reinstall the grub2 of sda1 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s


Unhide GRUB boot menu in sda1/etc/default/grub

*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
Subsystem: Acer Incorporated [ALI] Device [1025:029b]
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
*******

grub-install: Info: executing modprobe efivars 2>/dev/null.
grub-install: Info: Looking for /sys/firmware/efi ...
grub-install: Info: ... not found. Looking for /proc/device-tree ...
grub-install: Info: ... not found.
Installing for i386-pc platform.
grub-install: Fehler: Installationsgerät ist nicht angegeben.
,.

Reinstall the GRUB of sda1 into the MBR of sda
Installing for i386-pc platform.
Installation finished. No error reported.
grub-install /dev/sda: exit code of grub-install /dev/sda:0

chroot /mnt/boot-sav/sda1 update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.13.0-24-generic
Found initrd image: /boot/initrd.img-3.13.0-24-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Unhide GRUB boot menu in sda1/boot/grub/grub.cfg

Bootsektor wurde erfolgreich repariert.

Sie können Ihren Rechner nun neu starten.

  • »Christian64« ist der Autor dieses Themas

Beiträge: 10

Registrierungsdatum: 03.11.2014

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: Unity

  • Nachricht senden

19

08.11.2014, 11:55

habe die 32 bit Version auch ausprobiert und habe das gleiche Ergebnis wie mit der 64 bit Version!
Grüße,
Christian