Sie sind nicht angemeldet.

Lieber Besucher, herzlich willkommen bei: Ubuntu-Forum & Kubuntu-Forum | www.Ubuntu-Forum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

1

18.11.2010, 21:11

Probleme bei Treiberinstallation für 8600M GT für Laptop Acer Aspire 5920g

Hallo! Ich bin neu in der Linux-Welt und habe auf meinem Laptop, ein Acer Apsire 5920g. Die Installation (Ubuntu 10.10, 32-bit) war auch super einfach, soger die WLAN Karte wurde erkannt, nur habe ich leider immer noch Probleme mit der Installation eines Treibers für meine GeForce 8600M GT, weil mit 800 x 600 Pixel Auflösung macht Ubuntu keinen Spaß.

Zuerst habe ich die zwei Treiber ausprobiert, die Ubuntu mir angeboten hat. Bei dem ersten ("empfohlen"), war nach dem Hochfahren nur noch die Konsole. Also hab ich den Treiber mit dem recovery-Mode entfernt und den anderen Treiber installiert, diesmal ging nach dem Neustart Bildschirm ganz aus, also nichtmal die Konsole, also wieder deinstalliert.

Auf der NVDIDIA Seite gibt es jedoch einen Treiber für meine Grafiikarte: NVIDIA-Linux-x86-260.19.21.run
Nachdem ich festgestellt hab, dass man den Treiber nicht einfach wie bei Windows mit einem Doppelklick installieren kann ;-) und ich ein bisschen im Internet gelesen habe, hab ichs mal nach dieser Anleitung versucht: http://wiki.linuxgaming.de/index.php/NVi…on_%28Ubuntu%29
Diesmal sah es schon ganz gut aus. Abwer dann kam da ein ERROR, es war ein längerer Text, fing aber an mit "Unable to load the kernel module 'nvidia.ko" und auf der nächsten Seite stand noch "Please see file /var/log/nvidia-installer.log".

Damit habe ich anscheinend auch ein bisschen was kaputt gemacht, denn dieses Programm, das mir die zwei Treiber vorgeschlagen hat, findet jetzt keine Treiber mehr, die es mir vorschlagen könnte (allerdings haben die ja anscheinend eh nicht funktioniert).

Kann mir jemand helfen? In Foren stoße ich immer wieder auf Leute, die auf meinem Laptop Ubuntu installiert haben, aber keiner beschreibt ein solches Problem.
Wie gesagt ich bin neu in der Linux-Welt, deswegen bräuchte ich eine möglichst ausführliche beschreibung, ich weiß gradmal, wie man ins Terminal kommt, Verzeichnisse wechselt und was der sudo-Befehl macht.

Würde ich mir vielleicht leichter tun, wenn ich eine andere Distribution (z.B. Suse) ausprobieren würde, oder eine ältere Ubuntu Version?
Wäre echt nett wenn mir jemand helfen könnte.

  • »praseodym« ist männlich

Beiträge: 955

Registrierungsdatum: 16.02.2010

Derivat: Ubuntu

Version: Ubuntu 20.04 LTS - Focal Fossa

Architektur: 64-Bit PC

Desktop: GNOME 3.0

  • Nachricht senden

2

19.11.2010, 14:30

Hallo und willkommen hier.

Hier gibts ne Anleitung für die manuelle Installation. Detailliert gibts das ganze noch hier. Das Paket libc6-i386 brauchst du für 32bit nicht installieren.
Was es alles gibt, das ich nicht brauche.
(Aristoteles)
COPY/PASTE funktioniert auch im Terminal

  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

3

19.11.2010, 15:14

Verdammt, anscheinend hab ich mit meinem ersten Installationsversuch doch mehr kaputt gemacht als ich dachte. Ich wollte nochmal nach deiner Anleitung ubuntuusers versuchen, aber wenn ich die Konsole mit Alt+Strg+F1 öffnen will bleibt der Bildschirm schwarz, es kommt nicht dieser Text mit meinem Benutzernamen, etc und auch kein blinkender Curser, also kann ich auch nix eingeben. Erst wenn ich Alt+7 drücke komme ich wieder zur grafischen Benutzeroberfläche zurück.
(Das Terminal funktioniert, jedoch muss ich ja mit dem einen Befehl die grafische Benutzeroberfläche ganz ausschalten).
Kann ich das wieder rückgängig machen?

Und (wo ich schon beim Fragenstellen bin) bedeutet "linux-headers-generic , an die eigene Architektur anpassen"? Das Paket ist installiert. Muss ich da noch etwas besonderes einstellen?

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »kratob« (19.11.2010, 15:16)


  • »praseodym« ist männlich

Beiträge: 955

Registrierungsdatum: 16.02.2010

Derivat: Ubuntu

Version: Ubuntu 20.04 LTS - Focal Fossa

Architektur: 64-Bit PC

Desktop: GNOME 3.0

  • Nachricht senden

4

19.11.2010, 20:15

Wenn das Headers-Paket drauf ist, ist gut. Versuche über

Quellcode

1
sudo service gdm stop

direkt auf die Konsole zu kommen.
Was es alles gibt, das ich nicht brauche.
(Aristoteles)
COPY/PASTE funktioniert auch im Terminal

  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

5

20.11.2010, 00:44

wenn ich das ins terminal eingebe, passiert das selbe, wie wenn ich sudo /etc/init.d/gdm stop eingebe, der Bildschirm wird schwarz, ähnlich wie bei der Konsole, und dann kommt nichts mehr, ich komme auch nicht mehr durch alt+F7 in die grafische Benutzeroberfläche zurück.

Noch etwas ist anders, seit meinem missglückten Installationsversuch: Beim runterfahren kommt immer kurz ein rosaner Bildschirm. Komisch irgendwie...

DocHifi

unregistriert

6

20.11.2010, 09:58

Hi,
alt+F7
auf die verschiedenen Konsolen kommt man mit "strg+alt+F1-8
Gruß DH

  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

7

20.11.2010, 11:48

ja, dass weiß ich mittlerweile auch schon. aber mein problem ist, dass sich die Konsole zwar öffnet wenn ich Strg+Alt+F1 drücke, aber ich sehe dann nichts mehr auf dem Bildschirm. Normalerweise sieht man doch u.a. seinen Benutzernamen, so ein blinkendes Zeichen und das, wass ich eintippe.
Jetzt ist der Bildschirm einfach schwarz und leer.

Gibts da keinen Trick? Oder muss ich Ubuntu neu installieren?

  • »floogy« ist männlich

Beiträge: 3 071

Registrierungsdatum: 10.03.2005

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 3.0

Andere Betriebssysteme: debian

  • Nachricht senden

8

20.11.2010, 12:42

Bitte poste mal folgende Ausgaben:

Quellcode

1
2
3
4
5
cat /var/log/nvidia-installer.log
cat /var/log/Xorg.0.log
uname -a
dpkg -l *nvidia*|grep ^ii
dpkg -l *linux*headers*|grep ^ii


Später, falls wir nicht helfen können, kannst Du alle nvidia pakete wieder entfernen.

Quellcode

1
sudo apt-get remove $(dpkg -l *nvidia*|grep ^ii|awk '{print $2}'|sed ':;s/\n/ /;N;T')

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »floogy« (20.11.2010, 12:44)


  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

9

20.11.2010, 12:53

hier erstmal Ausgabe von cat /var/log/nvidia-installer.log
ist ziemlich lang ^^


Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
kernel output path  : (not specified)
kernel install path  : (not specified)
precompiled kernel interfaces path : (not specified)
precompiled kernel interfaces url : (not specified)
proc mount point  : /proc
ui  : (not specified)
tmpdir  : /tmp
ftp mirror  : ftp://download.nvidia.com
RPM file list  : (not specified)
selinux chcon type  : (not specified)

Using: nvidia-installer ncurses user interface
-> License accepted.
-> Installing NVIDIA driver version 260.19.21.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
-> Kernel source path: '/lib/modules/2.6.35-22-generic/build'
-> Kernel output path: '/lib/modules/2.6.35-22-generic/build'
-> Performing rivafb check.
-> Performing nvidiafb check.
-> Performing Xen check.
-> Cleaning kernel module build directory.
executing: 'cd ./kernel; make clean'...
-> Building kernel module:
executing: 'cd ./kernel; make module SYSSRC=/lib/modules/2.6.35-22-generic/b
uild SYSOUT=/lib/modules/2.6.35-22-generic/build'...
NVIDIA: calling KBUILD...
test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
  echo;         \
  echo " ERROR: Kernel configuration is invalid.";   \
  echo "  include/generated/autoconf.h or include/config/auto.conf are
missing.";\
  echo "  Run 'make oldconfig && make prepare' on kernel src to fix it
."; \
  echo;         \
  /bin/false)
mkdir -p /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.tmp_versions ; r
m -f /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.tmp_versions/*
make -f scripts/Makefile.build obj=/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.2
1/kernel
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.nv.o.d -nos
tdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/src/linux-h
eaders-2.6.35-22-generic/arch/x86/include -Iinclude -include include/genera
ted/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prototy
pes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-functio
n-declaration -Wno-format-security -fno
-delete-null-pointer-checks -O2 -m32 -msoft-float -mregparm=3 -freg-struct-r
eturn -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-o
utgoing-args -Wa,-mtune=generic32 -ffreestanding -fstack-protector -DCONFIG_
AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wn
o-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -
mno-3dnow -Wframe-larger-than=1024 -fno-omit-frame-pointer -fno-optimize-sib
ling-calls -pg -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-o
verflow -fconserve-stack -I/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel
-Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DN
VRM -DNV_VERSION_STRING="260.19.21" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D
"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv)" -D"KBUILD_MODNAME=KBU
ILD_STR(nvidia)" -c -o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.t
mp_nv.o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv.c
In file included from include/linux/kernel.h:17,
 from include/linux/sched.h:54,
 from include/linux/utsname.h:35,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:27,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv.c
:13:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
In file included from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/uaccess.h:571,
 from include/linux/poll.h:14,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:84,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv.c
:13:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h: 
In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h:2
09: warning: comparison between signed and unsigned integer expressions
 set -e ; perl /usr/src/linux-headers-2.6.35-22-generic/scripts/recordmcoun
t.pl "i386" "little" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp
/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv.o";
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.nv_gvi.o.d 
-nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/src/lin
ux-headers-2.6.35-22-generic/arch/x86/include -Iinclude -include include/ge
nerated/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-pro
totypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-fun
ction-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -
m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=
2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32
-ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FR
AME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign-compare -fno-asynchronous-u
nwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=1024
-fno-omit-frame-pointer
-fno-optimize-sibling-calls -pg -Wdeclaration-after-statement -Wno-pointer-
sign -fno-strict-overflow -fconserve-stack -I/tmp/selfgz1897/NVIDIA-Linux-x8
6-260.19.21/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KE
RNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING="260.19.21" -UDEBUG -U_DEBUG -D
NDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv_gvi)"
-D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz1897/NVIDIA-Linux-x
86-260.19.21/kernel/.tmp_nv_gvi.o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21
/kernel/nv_gvi.c
In file included from include/linux/kernel.h:17,
 from include/linux/sched.h:54,
 from include/linux/utsname.h:35,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:27,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv_g
vi.c:15:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
In file included from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/uaccess.h:571,
 from include/linux/poll.h:14,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:84,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv_g
vi.c:15:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h: 
In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h:2
09: warning: comparison between signed and unsigned integer expressions
 set -e ; perl /usr/src/linux-headers-2.6.35-22-generic/scripts/recordmcoun
t.pl "i386" "little" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp
/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv_gvi.o";
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.nv-vm.o.d -
nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/src/linu
x-headers-2.6.35-22-generic/arch/x86/include -Iinclude -include include/gen
erated/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-prot
otypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-func
tion-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m
32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2
-march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -
ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRA
ME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign-compare -fno-asynchronous-un
wind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=1024 
-fno-omit-frame-pointer -fno-optimize-sibling-calls -pg -Wdeclaration-after-
statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -I/tmp/sel
fgz1897/NVIDIA-Linux-x86-260.19.21/kernel -Wall -MD -Wsign-compare -Wno-cast
-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING="260.19.2
1" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASEN
AME=KBUILD_STR(nv_vm)" -D"KBUILD_MODNAME=KBUILD_STR(nvidi
a)" -c -o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.tmp_nv-vm.o /t
mp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-vm.c
In file included from include/linux/kernel.h:17,
 from include/linux/sched.h:54,
 from include/linux/utsname.h:35,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:27,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-v
m.c:14:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
In file included from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/uaccess.h:571,
 from include/linux/poll.h:14,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:84,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-v
m.c:14:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h: 
In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h:2
09: warning: comparison between signed and unsigned integer expressions
 set -e ; perl /usr/src/linux-headers-2.6.35-22-generic/scripts/recordmcoun
t.pl "i386" "little" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp
/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-vm.o";
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.os-agp.o.d 
-nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/src/lin
ux-headers-2.6.35-22-generic/arch/x86/include -Iinclude -include include/ge
nerated/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-pro
totypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-fun
ction-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -
m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=
2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32
-ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_
CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign-compare -fno-a
synchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-lar
ger-than=1024 -fno-omit-frame-pointer -fno-optimize-sibling-calls -pg -Wdecl
aration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-st
ack -I/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel -Wall -MD -Wsign-com
pare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STR
ING="260.19.21" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -
D"KBUILD_BASENAME=KBUILD_STR(os_agp)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)"
-c -o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.tmp_os-agp.o /tmp/
selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-agp.c
In file included from include/linux/kernel.h:17,
 from include/linux/sched.h:54,
 from include/linux/utsname.h:35,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:27,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-a
gp.c:24:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
In file included from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/uaccess.h:571,
 from include/linux/poll.h:14,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:84,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-a
gp.c:24:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h: 
In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h:2
09: warning: comparison between signed and unsigned integer expressions
 set -e ; perl /usr/src/linux-headers-2.6.35-22-generic/scripts/recordmcoun
t.pl "i386" "little" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp
/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-agp.o";
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.os-interface
.o.d -nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/s
rc/linux-headers-2.6.35-22-generic/arch/x86/include -Iinclude -include incl
ude/generated/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstri
ct-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implic
it-function-declaration -Wno-format-security -fno-delete-null-pointer-checks
-O2 -m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boun
dary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=gene
ric32 -ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIG
NAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign-compare -fno-asynchro
nous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-tha
n=1024 -fno-omit-frame-pointer -fno-optimize-sibling-calls -pg -Wdeclaration
-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -I/
tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel -Wall -MD -Wsign-compare -W
no-cast-qual -Wno-err
or -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING="260.19.21" -UDEBUG -U
_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR
(os_interface)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz189
7/NVIDIA-Linux-x86-260.19.21/kernel/.tmp_os-interface.o /tmp/selfgz1897/NVID
IA-Linux-x86-260.19.21/kernel/os-interface.c
In file included from include/linux/kernel.h:17,
 from include/linux/sched.h:54,
 from include/linux/utsname.h:35,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:27,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-i
nterface.c:26:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
In file included from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/uaccess.h:571,
 from include/linux/poll.h:14,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:84,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-i
nterface.c:26:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h: 
In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h:2
09: warning: comparison between signed and unsigned integer expressions
 set -e ; perl /usr/src/linux-headers-2.6.35-22-generic/scripts/recordmcoun
t.pl "i386" "little" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp
/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-interface.o";
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.os-registry.
o.d -nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/sr
c/linux-headers-2.6.35-22-generic/arch/x86/include -Iinclude -include inclu
de/generated/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstric
t-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implici
t-function-declaration -Wno-format-security -fno-delet
e-null-pointer-checks -O2 -m32 -msoft-float -mregparm=3 -freg-struct-return 
-mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoin
g-args -Wa,-mtune=generic32 -ffreestanding -fstack-protector -DCONFIG_AS_CFI
=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign
-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3d
now -Wframe-larger-than=1024 -fno-omit-frame-pointer -fno-optimize-sibling-c
alls -pg -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflo
w -fconserve-stack -I/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel -Wall
-MD -Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -D
NV_VERSION_STRING="260.19.21" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUIL
D_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(os_registry)" -D"KBUILD_MODNAME=
KBUILD_STR(nvidia)" -c -o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel
/.tmp_os-registry.o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-reg
istry.c
In file included from include/linux/kernel.h:17,
 from include/linux/sched.h:54,
 from include/linux/utsname.h:35,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:27,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-r
egistry.c:15:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
In file included from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/uaccess.h:571,
 from include/linux/poll.h:14,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:84,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-r
egistry.c:15:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h: 
In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h:2
09: warning: comparison between signed and unsigned integer expressions
 set -e ; perl /usr/src/linux-headers-2.6.35-22-generic/scripts/recordmcoun
t.pl "i386" "little" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp
/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-registry.o";
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.nv-i2c.o.d 
-nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/src/lin
ux-headers-2.6.35-22-generic/arch/x86/include -Iinclude -include include/ge
nerated/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-pro
totypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-fun
ction-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -
m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=
2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32
-ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FR
AME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign-compare -fno-asynchronous-u
nwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow 
-Wframe-larger-than=1024 -fno-omit-frame-pointer -fno-optimize-sibling-calls
-pg -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fc
onserve-stack -I/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel -Wall -MD 
-Wsign-compare -Wno-cast-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_V
ERSION_STRING="260.19.21" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_ST
R(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nv_i2c)" -D"KBUILD_MODNAME=KBUILD_ST
R(nvidia)" -c -o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.tmp_nv-
i2c.o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-i2c.c
In file included from include/linux/kernel.h:17,
 from include/linux/sched.h:54,
 from include/linux/utsname.h:35,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:27,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-i
2c.c:8:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
In file included from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/uaccess.h:571,
 from include/linux/poll.h:14,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:84,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-i
2c.c:8:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h: 
In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h:2
09: warning: comparison between signed and unsigned integer expressions
 set -e ; perl /usr/src/linux-headers-2.6.35-22-generic/scripts/recordmcoun
t.pl "i386" "little" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp
/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-i2c.o";
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.nvacpi.o.d 
-nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/src/lin
ux-headers-2.6.35-22-generic/arch/x86/include -Iinclude -include include/ge
nerated/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict-pro
totypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-fun
ction-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -
m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=
2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32
-ffreestanding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FR
AME=1 -DCONFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign-compare -fno-asynchronous-u
nwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=1024
-fno-omit-frame-pointer -fno-optimize-sibling-calls -pg -Wdeclaration-after-
statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -I/tmp/sel
fgz1897/NVIDIA-Linux-x86-260.19.21/kernel -Wall -MD -Wsign-compare -Wno-cast
-qual -Wno-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING="260.19.2
1" -UDEBUG -U_DEBUG -DNDEBUG -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASEN
AME=KBUILD_
STR(nvacpi)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -c -o /tmp/selfgz1897/N
VIDIA-Linux-x86-260.19.21/kernel/.tmp_nvacpi.o /tmp/selfgz1897/NVIDIA-Linux-
x86-260.19.21/kernel/nvacpi.c
In file included from include/linux/kernel.h:17,
 from include/linux/sched.h:54,
 from include/linux/utsname.h:35,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:27,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nvac
pi.c:15:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
In file included from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/uaccess.h:571,
 from include/linux/poll.h:14,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-l
inux.h:84,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nvac
pi.c:15:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h: 
In function ‘copy_from_user’:
/usr/src/linux-headers-2.6.35-22-generic/arch/x86/include/asm/uaccess_32.h:2
09: warning: comparison between signed and unsigned integer expressions
 set -e ; perl /usr/src/linux-headers-2.6.35-22-generic/scripts/recordmcoun
t.pl "i386" "little" "32" "objdump" "objcopy" "cc" "ld" "nm" "" "" "1" "/tmp
/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nvacpi.o";
 ld -m elf_i386 -r -o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/n
vidia.o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-kernel.o /tmp/s
elfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv.o /tmp/selfgz1897/NVIDIA-Linu
x-x86-260.19.21/kernel/nv_gvi.o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/k
ernel/nv-vm.o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-agp.o /tm
p/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/os-interface.o /tmp/selfgz189
7/NVIDIA-Linux-x86-260.19.21/kernel/os-registry.o /tmp/selfgz1897/NVIDIA-Lin
ux-x86-260.19.21/kernel/nv-i2c.o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/
kernel/nvac
pi.o 
(cat /dev/null; echo kernel//tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/ker
nel/nvidia.ko;) > /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/modules.
order
make -f /usr/src/linux-headers-2.6.35-22-generic/scripts/Makefile.modpost
 scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.35-22-generic/Modu
le.symvers -I /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/Module.symve
rs -o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/Module.symvers -S -
w -s
WARNING: could not find /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.n
v-kernel.o.cmd for /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nv-kern
el.o
 cc -Wp,-MD,/tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/.nvidia.mod.o
.d -nostdinc -isystem /usr/lib/gcc/i686-linux-gnu/4.4.5/include -I/usr/src
/linux-headers-2.6.35-22-generic/arch/x86/include -Iinclude -include includ
e/generated/autoconf.h -Iubuntu/include -D__KERNEL__ -Wall -Wundef -Wstrict
-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit
-function-decla
ration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m32 -msoft-
float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2 -march=i6
86 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestan
ding -fstack-protector -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCO
NFIG_AS_CFI_SECTIONS=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tabl
es -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Wframe-larger-than=1024 -fno-omit
-frame-pointer -fno-optimize-sibling-calls -pg -Wdeclaration-after-statement
-Wno-pointer-sign -fno-strict-overflow -fconserve-stack -I/tmp/selfgz1897/NV
IDIA-Linux-x86-260.19.21/kernel -Wall -MD -Wsign-compare -Wno-cast-qual -Wno
-error -D__KERNEL__ -DMODULE -DNVRM -DNV_VERSION_STRING="260.19.21" -UDEBU
G -U_DEBUG -DNDEBUG -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nvid
ia.mod)" -D"KBUILD_MODNAME=KBUILD_STR(nvidia)" -DMODULE -c -o /tmp/selfgz1
897/NVIDIA-Linux-x86-260.19.21/kernel/nvidia.mod.o /tmp/selfgz1897/NVIDIA-Li
nux-x86-260.19.21/kernel/nvidia.mod
.c
In file included from include/linux/kernel.h:17,
 from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/percpu.h:44,
 from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/current.h:5,
 from /usr/src/linux-headers-2.6.35-22-generic/arch/x86/incl
ude/asm/processor.h:15,
 from include/linux/prefetch.h:14,
 from include/linux/list.h:6,
 from include/linux/module.h:9,
 from /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nvid
ia.mod.c:1:
include/linux/bitops.h: In function ‘hweight_long’:
include/linux/bitops.h:49: warning: signed and unsigned type in conditional 
expression
 ld -r -m elf_i386 -T /usr/src/linux-headers-2.6.35-22-generic/scripts/modu
le-common.lds --build-id -o /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kerne
l/nvidia.ko /tmp/selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nvidia.o /tmp/
selfgz1897/NVIDIA-Linux-x86-260.19.21/kernel/nvidia.mod.o
NVIDIA: left KBUILD.
-> done.
-> Kernel module compilation complete.
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
 frequently when this kernel module was built against the wrong or
 improperly configured kernel sources, with a version of gcc that differs
 from the one used to build the target kernel, or if a driver such as
 rivafb, nvidiafb, or nouveau is present and prevents the NVIDIA kernel
 module from obtaining ownership of the NVIDIA graphics device(s), or
 NVIDIA GPU installed in this system is not supported by this NVIDIA
 Linux graphics driver release.
  
 Please see the log entries 'Kernel module load error' and 'Kernel
 messages' at the end of the file '/var/log/nvidia-installer.log' for
 more information.
-> Kernel module load error: insmod: error inserting './kernel/nvidia.ko': -1
No such device
-> Kernel messages:
[ 203.409309] wlan0: deauthenticating from 00:1a:2a:81:6a:9b by local
choice (reason=3)
[ 203.433188] cfg80211: All devices are disconnected, going to restore
regulatory settings
[ 203.433199] cfg80211: Restoring regulatory settings
[ 203.433208] cfg80211: Calling CRDA to update world regulatory domain
[ 203.443432] cfg80211: World regulatory domain updated:
[ 203.443440]  (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 203.443449]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
[ 203.443457]  (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000
mBm)
[ 203.443465]  (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000
mBm)
[ 203.443472]  (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
[ 203.443479]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
[ 510.295730] nvidia: module license 'NVIDIA' taints kernel.
[ 510.295735] Disabling lock debugging due to kernel taint
[ 511.287108] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 511.287130] nvidia 0000:01:00.0: setting latency timer to 64
[ 511.287143] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 511.287202] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407)
installed
[ 511.287206] NVRM: in this system is not supported by the 260.19.21 NVIDIA
Linux
[ 511.287209] NVRM: graphics driver release. Please see 'Appendix A -
[ 511.287212] NVRM: Supported NVIDIA GPU Products' in this release's
README,
[ 511.287215] NVRM: available on the Linux graphics driver download page at
[ 511.287218] NVRM: www.nvidia.com.
[ 511.287232] nvidia: probe of 0000:01:00.0 failed with error -1
[ 511.287286] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 511.287292] NVRM: None of the NVIDIA graphics adapters were initialized!
ERROR: Installation has failed. Please see the file
 '/var/log/nvidia-installer.log' for details. You may find suggestions
 on fixing installation problems in the README available on the Linux
 driver download page at www.nvidia.com.
tobias@Tobias-PC:~$

  • »floogy« ist männlich

Beiträge: 3 071

Registrierungsdatum: 10.03.2005

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 3.0

Andere Betriebssysteme: debian

  • Nachricht senden

10

20.11.2010, 13:00

Bitte noch die anderen (bis auf Xorg.0.log darauf können wir glaube ich verzichten.) und folgende Ausgaben:

Quellcode

1
2
lspci -v|grep -i vga
lsmod|egrep 'nv|nouv'

  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

11

20.11.2010, 13:02

ausgabe von cat /var/log/Xorg.0.log:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
[14.445] BlueMaskSize: 8
[14.445] BlueFieldPosition: 0
[14.445] RsvdMaskSize: 8
[14.445] RsvdFieldPosition: 24
[14.445] DirectColorModeInfo: 0
[14.445] PhysBasePtr: 0x9470000
[14.445] LinBytesPerScanLine: 1280
[14.445] BnkNumberOfImagePages: 10
[14.445] LinNumberOfImagePages: 10
[14.445] LinRedMaskSize: 8
[14.445] LinRedFieldPosition: 16
[14.445] LinGreenMaskSize: 8
[14.445] LinGreenFieldPosition: 8
[14.445] LinBlueMaskSize: 8
[14.445] LinBlueFieldPosition: 0
[14.445] LinRsvdMaskSize: 8
[14.445] LinRsvdFieldPosition: 24
[14.445] MaxPixelClock: 229500000
[14.447] Mode: 13d (640x400)
[14.447] ModeAttributes: 0x3bf
[14.447] WinAAttributes: 0x7
[14.447] WinBAttributes: 0x0
[14.447] WinGranularity: 64
[14.447] WinSize: 64
[14.447] WinASegment: 0xa000
[14.447] WinBSegment: 0x0
[14.447] WinFuncPtr: 0xc0008922
[14.447] BytesPerScanline: 1280
[14.447] XResolution: 640
[14.447] YResolution: 400
[14.447] XCharSize: 8
[14.447] YCharSize: 16
[14.447] NumberOfPlanes: 1
[14.447] BitsPerPixel: 16
[14.447] NumberOfBanks: 1
[14.447] MemoryModel: 6
[14.447] BankSize: 0
[14.447] NumberOfImages: 6
[14.447] RedMaskSize: 5
[14.447] RedFieldPosition: 11
[14.447] GreenMaskSize: 6
[14.447] GreenFieldPosition: 5
[14.447] BlueMaskSize: 5
[14.447] BlueFieldPosition: 0
[14.447] RsvdMaskSize: 0
[14.447] RsvdFieldPosition: 0
[14.447] DirectColorModeInfo: 0
[14.447] PhysBasePtr: 0x9470000
[14.447] LinBytesPerScanLine: 1280
[14.447] BnkNumberOfImagePages: 6
[14.447] LinNumberOfImagePages: 6
[14.447] LinRedMaskSize: 5
[14.447] LinRedFieldPosition: 11
[14.447] LinGreenMaskSize: 6
[14.447] LinGreenFieldPosition: 5
[14.447] LinBlueMaskSize: 5
[14.447] LinBlueFieldPosition: 0
[14.447] LinRsvdMaskSize: 0
[14.447] LinRsvdFieldPosition: 0
[14.447] MaxPixelClock: 229500000
[14.448] *Mode: 13e (640x400)
[14.449] ModeAttributes: 0x3bf
[14.449] WinAAttributes: 0x7
[14.449] WinBAttributes: 0x0
[14.449] WinGranularity: 64
[14.449] WinSize: 64
[14.449] WinASegment: 0xa000
[14.449] WinBSegment: 0x0
[14.449] WinFuncPtr: 0xc0008922
[14.449] BytesPerScanline: 2560
[14.449] XResolution: 640
[14.449] YResolution: 400
[14.449] XCharSize: 8
[14.449] YCharSize: 16
[14.449] NumberOfPlanes: 1
[14.449] BitsPerPixel: 32
[14.449] NumberOfBanks: 1
[14.449] MemoryModel: 6
[14.449] BankSize: 0
[14.449] NumberOfImages: 2
[14.449] RedMaskSize: 8
[14.449] RedFieldPosition: 16
[14.449] GreenMaskSize: 8
[14.449] GreenFieldPosition: 8
[14.449] BlueMaskSize: 8
[14.449] BlueFieldPosition: 0
[14.449] RsvdMaskSize: 8
[14.449] RsvdFieldPosition: 24
[14.449] DirectColorModeInfo: 0
[14.449] PhysBasePtr: 0x9470000
[14.449] LinBytesPerScanLine: 2560
[14.449] BnkNumberOfImagePages: 2
[14.449] LinNumberOfImagePages: 2
[14.449] LinRedMaskSize: 8
[14.449] LinRedFieldPosition: 16
[14.449] LinGreenMaskSize: 8
[14.449] LinGreenFieldPosition: 8
[14.449] LinBlueMaskSize: 8
[14.449] LinBlueFieldPosition: 0
[14.449] LinRsvdMaskSize: 8
[14.449] LinRsvdFieldPosition: 24
[14.449] MaxPixelClock: 229500000
[14.450] Mode: 160 (1280x800)
[14.450] ModeAttributes: 0x3bf
[14.451] WinAAttributes: 0x7
[14.451] WinBAttributes: 0x0
[14.451] WinGranularity: 64
[14.451] WinSize: 64
[14.451] WinASegment: 0xa000
[14.451] WinBSegment: 0x0
[14.451] WinFuncPtr: 0xc0008922
[14.451] BytesPerScanline: 1280
[14.451] XResolution: 1280
[14.451] YResolution: 800
[14.451] XCharSize: 8
[14.451] YCharSize: 16
[14.451] NumberOfPlanes: 1
[14.451] BitsPerPixel: 8
[14.451] NumberOfBanks: 1
[14.451] MemoryModel: 4
[14.451] BankSize: 0
[14.451] NumberOfImages: 2
[14.451] RedMaskSize: 0
[14.451] RedFieldPosition: 0
[14.451] GreenMaskSize: 0
[14.451] GreenFieldPosition: 0
[14.451] BlueMaskSize: 0
[14.451] BlueFieldPosition: 0
[14.451] RsvdMaskSize: 0
[14.451] RsvdFieldPosition: 0
[14.451] DirectColorModeInfo: 0
[14.451] PhysBasePtr: 0x9470000
[14.451] LinBytesPerScanLine: 1280
[14.451] BnkNumberOfImagePages: 2
[14.451] LinNumberOfImagePages: 2
[14.451] LinRedMaskSize: 0
[14.451] LinRedFieldPosition: 0
[14.451] LinGreenMaskSize: 0
[14.451] LinGreenFieldPosition: 0
[14.451] LinBlueMaskSize: 0
[14.451] LinBlueFieldPosition: 0
[14.451] LinRsvdMaskSize: 0
[14.451] LinRsvdFieldPosition: 0
[14.451] MaxPixelClock: 229500000
[14.452] *Mode: 161 (1280x800)
[14.452] ModeAttributes: 0x3bf
[14.452] WinAAttributes: 0x7
[14.452] WinBAttributes: 0x0
[14.453] WinGranularity: 64
[14.453] WinSize: 64
[14.453] WinASegment: 0xa000
[14.453] WinBSegment: 0x0
[14.453] WinFuncPtr: 0xc0008922
[14.453] BytesPerScanline: 5120
[14.453] XResolution: 1280
[14.453] YResolution: 800
[14.453] XCharSize: 8
[14.453] YCharSize: 16
[14.453] NumberOfPlanes: 1
[14.453] BitsPerPixel: 32
[14.453] NumberOfBanks: 1
[14.453] MemoryModel: 6
[14.453] BankSize: 0
[14.453] NumberOfImages: 1
[14.453] RedMaskSize: 8
[14.453] RedFieldPosition: 16
[14.453] GreenMaskSize: 8
[14.453] GreenFieldPosition: 8
[14.453] BlueMaskSize: 8
[14.453] BlueFieldPosition: 0
[14.453] RsvdMaskSize: 8
[14.453] RsvdFieldPosition: 24
[14.453] DirectColorModeInfo: 0
[14.453] PhysBasePtr: 0x9470000
[14.453] LinBytesPerScanLine: 5120
[14.453] BnkNumberOfImagePages: 1
[14.453] LinNumberOfImagePages: 1
[14.453] LinRedMaskSize: 8
[14.453] LinRedFieldPosition: 16
[14.453] LinGreenMaskSize: 8
[14.453] LinGreenFieldPosition: 8
[14.453] LinBlueMaskSize: 8
[14.453] LinBlueFieldPosition: 0
[14.453] LinRsvdMaskSize: 8
[14.453] LinRsvdFieldPosition: 24
[14.453] MaxPixelClock: 229500000
[14.454] Mode: 162 (768x480)
[14.454] ModeAttributes: 0x3bf
[14.454] WinAAttributes: 0x7
[14.454] WinBAttributes: 0x0
[14.454] WinGranularity: 64
[14.454] WinSize: 64
[14.455] WinASegment: 0xa000
[14.455] WinBSegment: 0x0
[14.455] WinFuncPtr: 0xc0008922
[14.455] BytesPerScanline: 768
[14.455] XResolution: 768
[14.455] YResolution: 480
[14.455] XCharSize: 8
[14.455] YCharSize: 16
[14.455] NumberOfPlanes: 1
[14.455] BitsPerPixel: 8
[14.455] NumberOfBanks: 1
[14.455] MemoryModel: 4
[14.455] BankSize: 0
[14.455] NumberOfImages: 8
[14.455] RedMaskSize: 0
[14.455] RedFieldPosition: 0
[14.455] GreenMaskSize: 0
[14.455] GreenFieldPosition: 0
[14.455] BlueMaskSize: 0
[14.455] BlueFieldPosition: 0
[14.455] RsvdMaskSize: 0
[14.455] RsvdFieldPosition: 0
[14.455] DirectColorModeInfo: 0
[14.455] PhysBasePtr: 0x9470000
[14.455] LinBytesPerScanLine: 768
[14.455] BnkNumberOfImagePages: 8
[14.455] LinNumberOfImagePages: 8
[14.455] LinRedMaskSize: 0
[14.455] LinRedFieldPosition: 0
[14.455] LinGreenMaskSize: 0
[14.455] LinGreenFieldPosition: 0
[14.455] LinBlueMaskSize: 0
[14.455] LinBlueFieldPosition: 0
[14.455] LinRsvdMaskSize: 0
[14.455] LinRsvdFieldPosition: 0
[14.455] MaxPixelClock: 229500000
[14.455] 
[14.455] (II) VESA(0): Total Memory: 224 64KB banks (14336kB)
[14.455] (II) VESA(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
[14.455] (II) VESA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
[14.455] (WW) VESA(0): Unable to estimate virtual size
[14.455] (II) VESA(0): Not using built-in mode "1280x800" (no mode of this name)
[14.455] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
[14.455] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[14.455] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[14.455] (II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
[14.455] (II) VESA(0): Not using built-in mode "320x400" (no mode of this name)
[14.455] (II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
[14.455] (II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
[14.455] (WW) VESA(0): No valid modes left. Trying less strict filter...
[14.455] (II) VESA(0): <default monitor>: Using hsync range of 31.50-37.90 kHz
[14.455] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-70.00 Hz
[14.455] (WW) VESA(0): Unable to estimate virtual size
[14.455] (II) VESA(0): Not using built-in mode "1280x800" (hsync out of range)
[14.455] (II) VESA(0): Not using built-in mode "1024x768" (hsync out of range)
[14.455] (II) VESA(0): Not using built-in mode "640x400" (hsync out of range)
[14.455] (II) VESA(0): Not using built-in mode "320x400" (hsync out of range)
[14.455] (II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings)
[14.456] (II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings)
[14.456] (--) VESA(0): Virtual size is 800x600 (pitch 800)
[14.456] (**) VESA(0): *Built-in mode "800x600"
[14.456] (**) VESA(0): *Built-in mode "640x480"
[14.456] (==) VESA(0): DPI set to (96, 96)
[14.456] (II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
[14.456] (II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
[14.457] (**) VESA(0): Using "Shadow Framebuffer"
[14.457] (II) Loading sub module "shadow"
[14.457] (II) LoadModule: "shadow"
[14.457] (II) Loading /usr/lib/xorg/modules/libshadow.so
[14.457] (II) Module shadow: vendor="X.Org Foundation"
[14.457] compiled for 1.9.0, module version = 1.1.0
[14.457] ABI class: X.Org ANSI C Emulation, version 0.4
[14.457] (II) Loading sub module "fb"
[14.457] (II) LoadModule: "fb"
[14.458] (II) Loading /usr/lib/xorg/modules/libfb.so
[14.458] (II) Module fb: vendor="X.Org Foundation"
[14.458] compiled for 1.9.0, module version = 1.0.0
[14.458] ABI class: X.Org ANSI C Emulation, version 0.4
[14.458] (II) UnloadModule: "nv"
[14.458] (II) Unloading /usr/lib/xorg/modules/drivers/nv_drv.so
[14.458] (II) UnloadModule: "fbdev"
[14.458] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[14.458] (II) UnloadModule: "fbdevhw"
[14.458] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[14.458] (==) Depth 24 pixmap format is 32 bpp
[14.458] (II) Loading sub module "int10"
[14.458] (II) LoadModule: "int10"
[14.458] (II) Reloading /usr/lib/xorg/modules/libint10.so
[14.458] (II) VESA(0): initializing int10
[14.458] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[14.505] (II) VESA(0): VESA BIOS detected
[14.505] (II) VESA(0): VESA VBE Version 3.0
[14.505] (II) VESA(0): VESA VBE Total Mem: 14336 kB
[14.505] (II) VESA(0): VESA VBE OEM: NVIDIA
[14.505] (II) VESA(0): VESA VBE OEM Software Rev: 96.132
[14.505] (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation
[14.505] (II) VESA(0): VESA VBE OEM Product: G84 Board - p407h01 
[14.505] (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev   
[14.505] (II) VESA(0): virtual address = (nil),
physical address = 0x9470000, size = 14680064
[14.505] (II) VESA(0): virtual address = 0xb75f1000,
physical address = 0xa0000, size = 65536
[14.510] (II) VESA(0): Setting up VESA Mode 0x115 (800x600)
[14.621] (==) VESA(0): Default visual is TrueColor
[14.621] (==) VESA(0): Backing store disabled
[14.621] (==) VESA(0): DPMS enabled
[14.621] (==) RandR enabled
[14.621] (II) Initializing built-in extension Generic Event Extension
[14.621] (II) Initializing built-in extension SHAPE
[14.621] (II) Initializing built-in extension MIT-SHM
[14.621] (II) Initializing built-in extension XInputExtension
[14.621] (II) Initializing built-in extension XTEST
[14.621] (II) Initializing built-in extension BIG-REQUESTS
[14.621] (II) Initializing built-in extension SYNC
[14.621] (II) Initializing built-in extension XKEYBOARD
[14.621] (II) Initializing built-in extension XC-MISC
[14.621] (II) Initializing built-in extension SECURITY
[14.621] (II) Initializing built-in extension XINERAMA
[14.621] (II) Initializing built-in extension XFIXES
[14.621] (II) Initializing built-in extension RENDER
[14.621] (II) Initializing built-in extension RANDR
[14.621] (II) Initializing built-in extension COMPOSITE
[14.621] (II) Initializing built-in extension DAMAGE
[14.621] (II) Initializing built-in extension GESTURE
[14.633] (II) AIGLX: Screen 0 is not DRI2 capable
[14.633] (II) AIGLX: Screen 0 is not DRI capable
[14.635] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[14.635] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[14.655] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[14.665] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[14.665] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[14.665] (II) LoadModule: "evdev"
[14.665] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[14.666] (II) Module evdev: vendor="X.Org Foundation"
[14.666] compiled for 1.9.0, module version = 2.3.2
[14.666] Module class: X.Org XInput Driver
[14.666] ABI class: X.Org XInput driver, version 11.0
[14.666] (**) Power Button: always reports core events
[14.666] (**) Power Button: Device: "/dev/input/event3"
[14.676] (II) Power Button: Found keys
[14.676] (II) Power Button: Configuring as keyboard
[14.676] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[14.676] (**) Option "xkb_rules" "evdev"
[14.676] (**) Option "xkb_model" "evdev"
[14.676] (**) Option "xkb_layout" "de"
[14.676] (**) Option "xkb_variant" "deadgraveacute"
[14.678] (II) XKB: reuse xkmfile /var/lib/xkb/server-B8C374E93E4079DBE7B4EEBF029E515BF2086686.xkm
[14.679] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[14.679] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[14.679] (**) Video Bus: always reports core events
[14.679] (**) Video Bus: Device: "/dev/input/event6"
[14.696] (II) Video Bus: Found keys
[14.696] (II) Video Bus: Configuring as keyboard
[14.696] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[14.696] (**) Option "xkb_rules" "evdev"
[14.696] (**) Option "xkb_model" "evdev"
[14.696] (**) Option "xkb_layout" "de"
[14.696] (**) Option "xkb_variant" "deadgraveacute"
[14.698] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[14.698] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[14.698] (**) Power Button: always reports core events
[14.698] (**) Power Button: Device: "/dev/input/event1"
[14.712] (II) Power Button: Found keys
[14.712] (II) Power Button: Configuring as keyboard
[14.712] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[14.712] (**) Option "xkb_rules" "evdev"
[14.712] (**) Option "xkb_model" "evdev"
[14.712] (**) Option "xkb_layout" "de"
[14.712] (**) Option "xkb_variant" "deadgraveacute"
[14.712] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[14.712] (II) No input driver/identifier specified (ignoring)
[14.713] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[14.713] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[14.713] (**) Sleep Button: always reports core events
[14.713] (**) Sleep Button: Device: "/dev/input/event2"
[14.728] (II) Sleep Button: Found keys
[14.728] (II) Sleep Button: Configuring as keyboard
[14.728] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[14.728] (**) Option "xkb_rules" "evdev"
[14.728] (**) Option "xkb_model" "evdev"
[14.728] (**) Option "xkb_layout" "de"
[14.728] (**) Option "xkb_variant" "deadgraveacute"
[14.729] (II) config/udev: Adding input device Acer CrystalEye webcam (/dev/input/event5)
[14.729] (**) Acer CrystalEye webcam: Applying InputClass "evdev keyboard catchall"
[14.729] (**) Acer CrystalEye webcam: always reports core events
[14.729] (**) Acer CrystalEye webcam: Device: "/dev/input/event5"
[14.744] (II) Acer CrystalEye webcam: Found keys
[14.744] (II) Acer CrystalEye webcam: Configuring as keyboard
[14.744] (II) XINPUT: Adding extended input device "Acer CrystalEye webcam" (type: KEYBOARD)
[14.744] (**) Option "xkb_rules" "evdev"
[14.744] (**) Option "xkb_model" "evdev"
[14.744] (**) Option "xkb_layout" "de"
[14.744] (**) Option "xkb_variant" "deadgraveacute"
[14.746] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event7)
[14.746] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[14.746] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[14.746] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event7"
[14.760] (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[14.760] (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[14.760] (II) Logitech USB-PS/2 Optical Mouse: Found relative axes
[14.760] (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[14.760] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[14.760] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[14.760] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[14.760] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[14.760] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[14.760] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[14.760] (II) No input driver/identifier specified (ignoring)
[14.764] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[14.764] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[14.765] (**) AT Translated Set 2 keyboard: always reports core events
[14.765] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[14.776] (II) AT Translated Set 2 keyboard: Found keys
[14.776] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[14.776] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[14.776] (**) Option "xkb_rules" "evdev"
[14.776] (**) Option "xkb_model" "evdev"
[14.776] (**) Option "xkb_layout" "de"
[14.776] (**) Option "xkb_variant" "deadgraveacute"
[14.777] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[14.777] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[14.777] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[14.777] (II) LoadModule: "synaptics"
[14.777] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[14.777] (II) Module synaptics: vendor="X.Org Foundation"
[14.777] compiled for 1.9.0, module version = 1.2.2
[14.777] Module class: X.Org XInput Driver
[14.777] ABI class: X.Org XInput driver, version 11.0
[14.777] (II) Synaptics touchpad driver version 1.2.2
[14.777] (**) Option "Device" "/dev/input/event8"
[14.825] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[14.825] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[14.825] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[14.825] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[14.825] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[14.857] (--) SynPS/2 Synaptics TouchPad: touchpad found
[14.857] (**) SynPS/2 Synaptics TouchPad: always reports core events
[14.873] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[14.873] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[14.873] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[14.873] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[14.873] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[14.905] (--) SynPS/2 Synaptics TouchPad: touchpad found
[14.905] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[14.905] (II) No input driver/identifier specified (ignoring)
[14.905] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[14.905] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[14.905] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[14.905] (II) Synaptics touchpad driver version 1.2.2
[14.905] (**) Option "Device" "/dev/input/event9"
[14.953] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[14.953] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[14.953] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[14.953] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[14.953] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[14.985] (--) SynPS/2 Synaptics TouchPad: touchpad found
[14.985] (**) SynPS/2 Synaptics TouchPad: always reports core events
[15.001] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[15.001] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[15.001] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[15.001] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[15.001] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[15.033] (--) SynPS/2 Synaptics TouchPad: touchpad found
[15.033] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[15.033] (II) No input driver/identifier specified (ignoring)


Ausgabe von uname -a:

Quellcode

1
2
tobias@Tobias-PC:~$ uname -a
Linux Tobias-PC 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 i686 GNU/Linux


Ausgabe von dpkg -l *nvidia*|grep ^ii

Quellcode

1
2
tobias@Tobias-PC:~$ dpkg -l *nvidia*|grep ^ii
tobias@Tobias-PC:~$ 

--> da passiert irgendwie nichts, auch keine fehlermeldung

Ausgabe von dpkg -l *linux*headers*|grep ^ii (Die "ii" am Anfang sind alle rot)

Quellcode

1
2
3
4
tobias@Tobias-PC:~$ dpkg -l *linux*headers*|grep ^ii
ii  linux-headers-2.6.35-22          2.6.35-22.35                                  Header files related to Linux kernel version 2.6.35
ii  linux-headers-2.6.35-22-generic  2.6.35-22.35                                  Linux kernel headers for version 2.6.35 on x86/x86_64
ii  linux-headers-generic            2.6.35.22.23                                  Generic Linux kernel headers


Hilft euch das weiter?
----------------------------------------------------------------------------

Hier noch die neuen:
Ausgabe von lspci -v|grep -i vga
(hier ist "VGA" immer rot)

Quellcode

1
2
tobias@Tobias-PC:~$ lspci -v|grep -i vga
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1) (prog-if 00 [VGA controller])


Ausgabe von lsmod|egrep 'nv|nouv'
hier ist "nouv" in den Wörtern "nouveau" immer rot gefärbt.

Quellcode

1
2
3
4
5
6
7
tobias@Tobias-PC:~$ lsmod|egrep 'nv|nouv'
nouveau           516971  0 
ttm                56633  1 nouveau
drm_kms_helper     30200  1 nouveau
drm               168054  3 nouveau,ttm,drm_kms_helper
i2c_algo_bit        5168  1 nouveau
tobias@Tobias-PC:~$ 

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »kratob« (20.11.2010, 13:07)


  • »floogy« ist männlich

Beiträge: 3 071

Registrierungsdatum: 10.03.2005

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 3.0

Andere Betriebssysteme: debian

  • Nachricht senden

12

20.11.2010, 13:25

Das hier ist die relevante Fehlermeldung:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
NVIDIA: left KBUILD.
-> done.
-> Kernel module compilation complete.
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
 frequently when this kernel module was built against the wrong or
 improperly configured kernel sources, with a version of gcc that differs
 from the one used to build the target kernel, or if a driver such as
 rivafb, nvidiafb, or nouveau is present and prevents the NVIDIA kernel
 module from obtaining ownership of the NVIDIA graphics device(s), or
 NVIDIA GPU installed in this system is not supported by this NVIDIA
 Linux graphics driver release.
  
 Please see the log entries 'Kernel module load error' and 'Kernel
 messages' at the end of the file '/var/log/nvidia-installer.log' for
 more information.
-> Kernel module load error: insmod: error inserting './kernel/nvidia.ko': -1
No such device
-> Kernel messages:
[...]
[ 510.295730] nvidia: module license 'NVIDIA' taints kernel.
[ 510.295735] Disabling lock debugging due to kernel taint
[ 511.287108] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 511.287130] nvidia 0000:01:00.0: setting latency timer to 64
[ 511.287143] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 511.287202] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407)
installed
[ 511.287206] NVRM: in this system is not supported by the 260.19.21 NVIDIA
Linux
[ 511.287209] NVRM: graphics driver release. Please see 'Appendix A -
[ 511.287212] NVRM: Supported NVIDIA GPU Products' in this release's
README,
[ 511.287215] NVRM: available on the Linux graphics driver download page at
[ 511.287218] NVRM: www.nvidia.com.
[ 511.287232] nvidia: probe of 0000:01:00.0 failed with error -1
[ 511.287286] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 511.287292] NVRM: None of the NVIDIA graphics adapters were initialized!
ERROR: Installation has failed. Please see the file


Wobei wir erst mal hier schauen:

Zitat

or if a driver such as
rivafb, nvidiafb, or nouveau is present and prevents the NVIDIA kernel
module from obtaining ownership of the NVIDIA graphics device(s){/quote]

Die header sind richtig installiert (das modul wurde ja auch erfolgreich kompiliert). Eventuell wird die Karte nicht unterstützt (siehe README, Appendix A und Ausgabe von lspci -v), da aber die nouveau Treiber geladen sind, denke ich, dass das nvidia-modul deshalb nicht geladen werden kann.

Du musst das Laden der nouveau module verbieten und dann neu starten. Dann müsste es klappen.

Im Link von praseodym heißt es:

Zitat


Zudem ist es notwendig in der Datei /etc/default/linux-restricted-modules-common die Nvidia-Kernelmodule von Ubuntu zu sperren, indem man "nv" zu den DISABLED_MODULES hinzufügt, damit es nicht zu Problemen mit Modulen aus den Paketen von nvidia-kernel-common und linux-restricted-modules kommt und man erspart sich dadurch die Deinstallation dieser Pakete.

DISABLED_MODULES="nv"

Hinweis:

Ab Ubuntu 7.04 muss man zusätzlich das Modul nvidia_new eintragen.

Quellcode

1
DISABLED_MODULES="nv nvidia_new"



Hier muss aber auch nouveau eingetragen werden!

Quellcode

1
DISABLED_MODULES="nv nvidia_new nouveau"

  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

13

20.11.2010, 14:44

Also ich habe jetzt

Quellcode

1
DISABLED_MODULES="nv nvidia_new nouveau"


eingegeben, und es ist garnichts passiert, also auch keine Fehlermeldung. Mir würde aber mal gesagt, dass wenn ich Linux nichts kommt, es ein gutes Zeichen ist ;-)

Nach dem Neustart ist aber trotzdem alles beim altern. Aber vielleicht würde es ja damit wirklich klappen, wenn ich die Installation nochmal nach der Anleitung von Ubuntuusers durchführen würde, damit ich dass machen kann, muss aber erstmal die Konsole wieder richtig funktionieren - und das tut sie nicht, es wird immer noch nichts angezeigt, wenn ich in die Konsole gehe. Und beim runterfahren kommt immer ein rosaner Bildschirm, statt dem text, der früher immer da gestanden hat. Kann ich die Konsole wieder reparieren, ohne Ubuntu komplett neu zu installieren?

  • »floogy« ist männlich

Beiträge: 3 071

Registrierungsdatum: 10.03.2005

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 3.0

Andere Betriebssysteme: debian

  • Nachricht senden

14

20.11.2010, 15:43

Du hast aber noch Zugriff zur grafischen Oberfläche und dem Terminal?
Was sagt nun folgendes:

Quellcode

1
2
3
lsmod |egrep -i 'nv|nouv|fb'
cat /proc/driver/nvidia/version
egrep '\(EE|\(WW' /var/log/Xorg.0.log

etwas genauer wäre diese Azusgabe:

Quellcode

1
egrep '\(EE|\(WW|\(\=|\(\-|\(NI|\(\?|\(\*' /var/log/Xorg.0.log

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »floogy« (20.11.2010, 15:49)


  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

15

20.11.2010, 15:56

Jaja, auf das Terminal hab ich noch Zugriff. Nur um es mit der Treiberinstallation nochmal zu versuchen brauch ich ja die Konsole (glaube ich).

Ausgabe von lsmod |egrep -i 'nv|nouv|fb':

Quellcode

1
2
3
4
5
6
tobias@Tobias-PC:~$ lsmod |egrep -i 'nv|nouv|fb'
nouveau           	516971  0 
ttm                	56633  1 nouveau
drm_kms_helper     	30200  1 nouveau
drm               	168054  3 nouveau,ttm,drm_kms_helper
i2c_algo_bit        	5168  1 nouveau


Ausgabe von cat /proc/driver/nvidia/version

Quellcode

1
2
3
tobias@Tobias-PC:~$ cat /proc/driver/nvidia/version
cat: /proc/driver/nvidia/version: No such file or directory
tobias@Tobias-PC:~$ 

liegts vielleicht daran?

Ausgabe von egrep '\(EE|\(WW' /var/log/Xorg.0.log

Quellcode

1
2
3
4
5
6
7
8
tobias@Tobias-PC:~$ egrep '\(EE|\(WW' /var/log/Xorg.0.log
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[	13.151] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[	13.366] (EE) [drm] failed to open device
[	13.367] (WW) Falling back to old probe method for fbdev
[	13.920] (WW) VESA(0): Unable to estimate virtual size
[	13.920] (WW) VESA(0): No valid modes left. Trying less strict filter...
[	13.920] (WW) VESA(0): Unable to estimate virtual size


Ausgabe von egrep '\(EE|\(WW|\(\=|\(\-|\(NI|\(\?|\(\*' /var/log/Xorg.0.log:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
tobias@Tobias-PC:~$ egrep '\(EE|\(WW|\(\=|\(\-|\(NI|\(\?|\(\*' /var/log/Xorg.0.log
[	13.098] Markers: (--) probed, (**) from config file, (==) default setting,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[	13.098] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 20 14:38:32 2010
[	13.150] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[	13.150] (==) No Layout section.  Using the first Screen section.
[	13.150] (==) No screen section available. Using defaults.
[	13.150] (**) |-->Screen "Default Screen Section" (0)
[	13.150] (**) |   |-->Monitor "<default monitor>"
[	13.151] (==) No monitor specified for screen "Default Screen Section".
[	13.151] (==) Automatically adding devices
[	13.151] (==) Automatically enabling devices
[	13.151] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[	13.151] (==) FontPath set to:
[	13.151] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[	13.153] (--) PCI:*(0:1:0:0) 10de:0407:1025:0121 rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
[	13.161] (==) AIGLX enabled
[	13.163] (==) Matched nouveau as autoconfigured driver 0
[	13.163] (==) Matched nv as autoconfigured driver 1
[	13.163] (==) Matched vesa as autoconfigured driver 2
[	13.163] (==) Matched fbdev as autoconfigured driver 3
[	13.163] (==) Assigned the driver to the xf86ConfigLayout
[	13.366] (EE) [drm] failed to open device
[	13.367] (WW) Falling back to old probe method for fbdev
[	13.500] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[	13.500] (==) VESA(0): RGB weight 888
[	13.500] (==) VESA(0): Default visual is TrueColor
[	13.500] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[	13.920] (WW) VESA(0): Unable to estimate virtual size
[	13.920] (WW) VESA(0): No valid modes left. Trying less strict filter...
[	13.920] (WW) VESA(0): Unable to estimate virtual size
[	13.920] (--) VESA(0): Virtual size is 800x600 (pitch 800)
[	13.920] (**) VESA(0): *Built-in mode "800x600"
[	13.920] (**) VESA(0): *Built-in mode "640x480"
[	13.920] (==) VESA(0): DPI set to (96, 96)
[	13.921] (**) VESA(0): Using "Shadow Framebuffer"
[	13.922] (==) Depth 24 pixmap format is 32 bpp
[	14.090] (==) VESA(0): Default visual is TrueColor
[	14.090] (==) VESA(0): Backing store disabled
[	14.090] (==) VESA(0): DPMS enabled
[	14.090] (==) RandR enabled
[	14.135] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[	14.135] (**) Power Button: always reports core events
[	14.135] (**) Power Button: Device: "/dev/input/event3"
[	14.145] (**) Option "xkb_rules" "evdev"
[	14.145] (**) Option "xkb_model" "evdev"
[	14.145] (**) Option "xkb_layout" "de"
[	14.145] (**) Option "xkb_variant" "deadgraveacute"
[	14.148] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[	14.148] (**) Video Bus: always reports core events
[	14.148] (**) Video Bus: Device: "/dev/input/event6"
[	14.161] (**) Option "xkb_rules" "evdev"
[	14.161] (**) Option "xkb_model" "evdev"
[	14.161] (**) Option "xkb_layout" "de"
[	14.161] (**) Option "xkb_variant" "deadgraveacute"
[	14.163] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[	14.163] (**) Power Button: always reports core events
[	14.163] (**) Power Button: Device: "/dev/input/event1"
[	14.177] (**) Option "xkb_rules" "evdev"
[	14.177] (**) Option "xkb_model" "evdev"
[	14.177] (**) Option "xkb_layout" "de"
[	14.177] (**) Option "xkb_variant" "deadgraveacute"
[	14.178] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[	14.178] (**) Sleep Button: always reports core events
[	14.178] (**) Sleep Button: Device: "/dev/input/event2"
[	14.193] (**) Option "xkb_rules" "evdev"
[	14.193] (**) Option "xkb_model" "evdev"
[	14.193] (**) Option "xkb_layout" "de"
[	14.193] (**) Option "xkb_variant" "deadgraveacute"
[	14.194] (**) Acer CrystalEye webcam: Applying InputClass "evdev keyboard catchall"
[	14.194] (**) Acer CrystalEye webcam: always reports core events
[	14.194] (**) Acer CrystalEye webcam: Device: "/dev/input/event7"
[	14.209] (**) Option "xkb_rules" "evdev"
[	14.209] (**) Option "xkb_model" "evdev"
[	14.209] (**) Option "xkb_layout" "de"
[	14.209] (**) Option "xkb_variant" "deadgraveacute"
[	14.211] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[	14.211] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[	14.211] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event5"
[	14.225] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[	14.225] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[	14.229] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[	14.229] (**) AT Translated Set 2 keyboard: always reports core events
[	14.229] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[	14.241] (**) Option "xkb_rules" "evdev"
[	14.241] (**) Option "xkb_model" "evdev"
[	14.241] (**) Option "xkb_layout" "de"
[	14.241] (**) Option "xkb_variant" "deadgraveacute"
[	14.241] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[	14.241] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[	14.242] (**) Option "Device" "/dev/input/event8"
[	14.321] (--) SynPS/2 Synaptics TouchPad: touchpad found
[	14.321] (**) SynPS/2 Synaptics TouchPad: always reports core events
[	14.337] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[	14.337] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[	14.337] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[	14.337] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[	14.369] (--) SynPS/2 Synaptics TouchPad: touchpad found
[	14.369] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[	14.369] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[	14.369] (**) Option "Device" "/dev/input/event9"
[	14.449] (--) SynPS/2 Synaptics TouchPad: touchpad found
[	14.449] (**) SynPS/2 Synaptics TouchPad: always reports core events
[	14.465] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[	14.465] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[	14.465] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[	14.465] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[	14.505] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   295.292] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   295.316] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   522.484] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   522.508] (--) SynPS/2 Synaptics TouchPad: touchpad found

16

20.11.2010, 16:09

ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel,

Der erste Teil (die Sourcen) sind ja erledigt. Daher zur zweiten Möglichkeit:

Quellcode

1
2
cat /proc/version # gibt auch die GCC-Version aus, mit der der Kernel kompiliert wurde
gcc -v # gibt die Version des aktuell installierten GCC aus.
Die beiden sollten identisch sein, sonst gibt es eben genanntes Problem (Modul passt nicht zum Kernel)

Meist ist der Kernel mit etwas älterem kompiliert. In dem Fall diese Version von gcc nach installieren. (Geht auch parallel zu einer vorhandenen, neueren Version.)
Dann dem Installscript beim Aufruf den richtigen Compiler ansagen. Ich bring hier ein Beispiel von meinem Rechner, bitte anpassen:

Quellcode

1
2
3
4
cat /proc/version
Linux version 2.6.26-2-686 (Debian 2.6.26-25lenny1) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Sep 16 19:35:51 UTC 2010
gcc -v
gcc version 4.3.2 (Debian 4.3.2-1.1) # letzte Zeile)

Also passt nicht zusammen, Kernel wurde mit gcc 4.1.3 kompiliert, aber installiert ist gcc 4.3.2 -> Paket "gcc-4.1" nachinstallieren.
Den Ort des Binary abfragen und nvidia-installer starten:

Quellcode

1
2
3
which gcc-4.1
/usr/bin/gcc-4.1
CC=/usr/bin/gcc-4.1 sudo ./nvidia-installer

Die Versionsnumern, wie gesagt auf eigene Gegebenheiten anpassen. Pfad und Name des Nvidia-Installers ebenfalls...

Edit: Wenn die Versionen zusammenpassen, kommen nur die Kernel-Sourcen in Frage.

Quellcode

1
dpkg -l linux-source* | grep ^ii
Beim Erstellen dieser Nachricht kamen keine Tiere zu Schaden.
me is all sausage
but don't call me Ferdl

  • »floogy« ist männlich

Beiträge: 3 071

Registrierungsdatum: 10.03.2005

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 3.0

Andere Betriebssysteme: debian

  • Nachricht senden

17

20.11.2010, 16:15

Hmm... Also Du nutzt kein framebuffer, daher fehlen Dir wahrscheinlich auch die consolen(?) Außerdem wird nouveau nun wohl nicht mehr genutzt, obwohl der Treiber noch geladen ist, merkwürdig.
Versuche mal ob Du so wieder die consolen zurück bekommst:

Quellcode

1
2
echo -e "vga16fb\nfbcon"|sudo tee -a /etc/modules
sudo reboot


Vielleicht solltest Du danaqch den ganzen nvidia-Krempel nun deinstallieren und nach dem wiki von vorne anfangen?

Quellcode

1
sudo apt-get  purge nvidia*


EDIT, Ja Fredl, daran hatte ich auch schon gedacht, es aber wohl eventuell zu unrecht verworfen, da ja alles kompiliert wurde.

PS:[OT] Liegt das an cookies, dass bei mir der Editor ohne Code-Tag und Quote-Buttons dargestellt wird?

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »floogy« (20.11.2010, 16:19)


  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

18

20.11.2010, 16:26

Also wenn ich das richtig sehe, passen die beiden bei mir zusammen:

Ausgabe von cat /proc/version:

Quellcode

1
2
tobias@Tobias-PC:~$ cat /proc/version
Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010

Also Version 4.4.5

Ausgabe von gcc -v

Quellcode

1
2
3
4
5
6
7
tobias@Tobias-PC:~$ gcc -v
Using built-in specs.
Target: i686-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.4.4-14ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.4 --enable-shared --enable-multiarch --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.4 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-targets=all --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=i686-linux-gnu
Thread model: posix
gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) 
tobias@Tobias-PC:~$ 


Also auch Version 4.4.5, oder seh ich da was falsch?
Also muss ich hier nichts machen oder doch?

  • »floogy« ist männlich

Beiträge: 3 071

Registrierungsdatum: 10.03.2005

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 3.0

Andere Betriebssysteme: debian

  • Nachricht senden

19

20.11.2010, 16:30

Nee, Du hast recht. Das Problem ist es also nicht. Ich denke es wird immer noch der nouveau-Treiber geladen, der verhindert, dass nvidia installiert werden kann. nvidia ist aber auch nicht installiert (siehe cat /proc/driver/nvidia/version und dpkg -l *nvidia*) und VESA scheint zum Einsatz zu kommen.

Hast Du Deine consolen wieder? (siehe echo -e [...] /etc/modules && reboot)

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »floogy« (20.11.2010, 16:31)


  • »kratob« ist der Autor dieses Themas

Beiträge: 29

Registrierungsdatum: 18.11.2010

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

20

20.11.2010, 16:34

@floogy:
Wenn ich das eingebe passiert bei mir folgendes:

Quellcode

1
2
3
4
5
tobias@Tobias-PC:~$ echo -e "vga16fb\nfbcon"|sudo tee -a /etc/module
[sudo] password for tobias: 
vga16fb
fbcon
tobias@Tobias-PC:~


Nach dem zweiten Befehl startet mein Laptop erwartungsgemäß neu, aber die Konsole ist genauso schwarz wie vorher :-(

Edit: Kann ich vll mithilfe des recovery-Mode was anstellen? Aber wenn ja was?

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »kratob« (20.11.2010, 16:51)