Sie sind nicht angemeldet.

- ? - (unbekannt) - Ubuntu Instalation nicht möglich

Lieber Besucher, herzlich willkommen bei: Ubuntu-Forum & Kubuntu-Forum | www.Ubuntu-Forum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

  • »panda-pirx« ist der Autor dieses Themas

Beiträge: 6

Registrierungsdatum: 29.08.2018

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 2.x

  • Nachricht senden

1

29.08.2018, 11:48

Ubuntu Instalation nicht möglich

Hallo
ich habe ein Problem und würde mich sehr über Hilfe freuen.
ich versuche gerade Ubuntu 18.04 auf dem Laptop meiner Mitbewohnerin zu instalieren da ihre alte Instalation (Ubuntu 14.4) nicht mehr hochfährt.
Die Installation bricht während der Partionierung immer ab, da diese nicht möglich ist.Ich habe alle Optionen (Manuell, Standarteinstellungen) ausprobiert.

Die Boot Option von der Festplatte zu booten gibt es im BIOS nicht mehr, denke ich zumindest. Bei der Partionierung habe ich gesehen das der USB unter sda erscheint und die Festplatte unter sdb. Ich denke hier ist das Problem.

Wie kann ich die BOOT Option Festplatte wieder bei BIOS hinzufügen? Wie kann ich das sda/sdb Problem lösen?
Ich freu mich sehr über Antworten.
Vielen Dank

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »panda-pirx« (29.08.2018, 12:25)


  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

2

29.08.2018, 19:10

Hallo!

Erzähle uns doch mal was zu dem Rechner! Modell etc..

Zitat

da ihre alte Instalation (Ubuntu 14.4) nicht mehr hochfährt.
Heißt genau was?

Zitat

Die Installation bricht während der Partionierung immer ab, da diese nicht möglich ist.
Wird da was zu gesagt, warum die nicht möglich ist?

Zitat

Die Boot Option von der Festplatte zu booten gibt es im BIOS nicht mehr, denke ich zumindest.
Wage ich zu bezweifeln! Außerdem hat jeder halbwegs moderne Rechner ein separates Bootmenü (meist aufrufbar über eine hohe F-Taste, ggf. ins Manual schauen), wo man das Startmedium explizit auswählen kann.

Starte das Installationsmedium bitte im Ausprobieren Modus (Live-Session), starte das Terminal (am schnellsten per STRG + ALT + T) und gebe folgenden Befehl ein:

Quellcode

1
sudo parted -l   ## -l = kleines L
Dann erfahren wir mehr über die Festplattenbelegung. Die Befehlsausgabe hier posten.

Gruß
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »panda-pirx« ist der Autor dieses Themas

Beiträge: 6

Registrierungsdatum: 29.08.2018

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 2.x

  • Nachricht senden

3

29.08.2018, 21:19

Hallo!
Erzähle uns doch mal was zu dem Rechner! Modell etc..
Asus FASA-XO197D / 15,6 HD / Intel Celeron N3060 / 4GB RAM/ 500GB HDD
Zitat


da ihre alte Instalation (Ubuntu 14.4) nicht mehr hochfährt.
Heißt genau was?
booted auf Initramfs. Ein bekannter hat es sich angeschaut und meinte da kann man nichts mehr machen.
Zitat


Die Installation bricht während der Partionierung immer ab, da diese nicht möglich ist.
Wird da was zu gesagt, warum die nicht möglich ist?

" Das Erstellen des Dateisystems ext4 der Partition 2 ( / Verzeichnis) auf SCSI2 (0,0,0) (sdb) ist fehlgeschlagen"

"Ubi-partman failed with exit code 10. Further Information maybe found in /var/log/syslog."

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
sudp Parted -l:
Modell: Generic Flash Disk (scsi)
Festplatte /dev/sda: 64,1GB
Sektorgröße (logisch/physisch): 2048B/512B
Partitionstabelle: mac
Disk-Flags: 

Nummer Anfang Ende Größe Dateisystem Name Flags
1 2048B 6143B 4096B Apple
2 1913MB 1916MB 2392kB EFI


Modell: ATA TOSHIBA MQ01ABF0 (scsi)
Festplatte /dev/sdb: 500GB
Sektorgröße (logisch/physisch): 512B/4096B
Partitionstabelle: gpt
Disk-Flags: 

Nummer Anfang Ende Größe Dateisystem Name Flags
1 1049kB 538MB 537MB fat32 EFI System Partition boot, esp
2 538MB 1305MB 768MB
3 1305MB 500GB 499GB


Danke schonmal und viele Grüße

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »panda-pirx« (29.08.2018, 21:26)


  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

4

29.08.2018, 22:36

Hallo!

Hast du den Stick für die Installation explizit für eine UEFI-Installation eingerichtet?

1. Falls ja, starte das Installationsmedium im Ausprobieren-Modus (Live-Session), starte das Programm Gparted, gehe oben auf Gerät/device und erstelle eine neue Partitionstabelle/partition table mit gpt. Achtung dabei wird alles auf der Platte gelöscht!!!!!!!
Dann startest du die Installation neu aus der Live-Session raus. Besser noch wenn du den Rechner neu startest und ins direkte Bootmenü des Rechners gehst, und dort explizit das Installationsmedium im UEFI-Modus startest.

2. Falls nein, 2 Möglichkeiten.

*1. Möglichkeit: Stick für UEFI einrichten, Infos siehe unten, und noch mal probieren. Ggf. wie oben beschrieben vorgehen.
*2. Möglichkeit: Du geht ins Set-Up des Rechners (UEFI/BIOS), dort in den Boot-Bereich und stellst von UEFI-Boot auf Legacy um. Nur Legacy, kein both oder first. Dann gehst wieder in die Live-Session und startest Gparted, und wieder wie oben beschrieben eine neue Partitionstabelle erstellen. Diesmal aber für mbr/msdos!!! Und wieder Neuinstallation starten.

Bootmodus und Partitionsstil müssen zusammen passen. Also UEFI und gpt oder CSM/Legacy und mbr/msdos. Infos wieder unten!

Gruß
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »panda-pirx« ist der Autor dieses Themas

Beiträge: 6

Registrierungsdatum: 29.08.2018

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 2.x

  • Nachricht senden

5

30.08.2018, 09:04

Hast du den Stick für die Installation explizit für eine UEFI-Installation eingerichtet?
Wie erkenne ich das den? Sorry

Grüße

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

6

30.08.2018, 12:07

Ich vermute, er ist für UEFI eingerichtet, lt. der obigen Ausgabe von parted bei dem 64GB Stick, Aber als Partitionsstil steht da "mac".....? . Da auch die Einstellungen im Set-Up nicht bekannt sind, bin ich mir nicht sicher. Schau in das unten verlinkte WIKI, da ist ein Screenshot, der anzeigt, ob man UEFI-Boot benutzt. Und noch mal der Hinweis, das direkte Bootmenü des Rechners zu nutzen und ggf. das Installationsmedium explizit als UEFI-Medium oder als Legacy Medium auszuwählen. Wie man einen Stick erstellt, ist dort auch beschrieben/verlinkt.

Gruß
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »panda-pirx« ist der Autor dieses Themas

Beiträge: 6

Registrierungsdatum: 29.08.2018

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 2.x

  • Nachricht senden

7

30.08.2018, 14:07

Hab das jetzt so versucht. Leider kam wieder die gleiche Meldung.

"Das Erstellen des Dateisystems ext4 der Partition 1 auf SCSI2 (0,0,0) (sdb) ist fehlgeschlagen"
Mit dem BIOS ist aber auch irgendwas komisch.
Wenn ich in das Menü gehe kommt erst eine Schnellauswahl:
P1: HL-DT-ST DVDRAM GUE1N
UEFI: Usb Stick
Usb Stick
P0: Toshiba MQ01ABF050
Enter Setup
Wenn ich dann ins Setup gehe und die Festplatte Toshiba als Boot Priorität eins festlegen will gibt es dort nur drei Optionen:
HL-DT-ST DVDRAM GUE1N
UEFI: Usb Stick
Usb Stick
Gruß

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »panda-pirx« (30.08.2018, 15:28)


  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

8

30.08.2018, 18:34

Hallo!

Das heisst erst mal, dass kein Bootloader installiert wurde, sonst müsste es einen entsprechenden Eintrag für Ubuntu geben. Der USB-Stick, einmal pro Modus ist normal.

Mach mal einen Festplattentest (Live-Session). Könnte sein, dass die ne Macke hat.

Quellcode

1
2
sudo apt-get install smartmontools 
sudo smartctl -H /dev/sdb
Hab hier die sdb-Platte genommen. Falls sich das geändert hat, das b durch a ersetzen. Ergebnis wieder hier posten.

Gruß
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »panda-pirx« ist der Autor dieses Themas

Beiträge: 6

Registrierungsdatum: 29.08.2018

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 2.x

  • Nachricht senden

9

30.08.2018, 21:33

sudo apt-get install smartmontools
sudo smartctl -H /dev/sdb

Quellcode

1
2
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED


Das sieht eigentlich ok aus

  • »Klaus P« ist männlich

Beiträge: 4 593

Registrierungsdatum: 25.10.2009

Derivat: anderes Ubuntu-Derivat

Architektur: 64-Bit PC

Desktop: anderer Desktop

Andere Betriebssysteme: 7/10

  • Nachricht senden

10

31.08.2018, 10:51

Mmmmh!

Dann bitte mal einen aussagefähigeren Durchlauf. Das dauert dann länger, wird imho aber irgendwo angezeigt:

Quellcode

1
sudo smartctl -t long /dev/sdb    #Status der ersten SATA-Platte ermitteln

und

Quellcode

1
sudo smartctl -a /dev/sdb     #Status der ersten SATA-Platte anzeigen 

und

Quellcode

1
sudo smartctl -A /dev/sdb  #Abfrage der Attribute


Wieder alles auf sdb eingestellt. Vorher überprüfen!

Gruß
Des modernen Menschen Computer ist sein Himmelreich! :rolleyes: Der Weg zur Hölle, ist allzu kurz auf dem falschen "EFI-Pfad" ;( : Kleiner Leitfaden zur UEFI-Installation

  • »panda-pirx« ist der Autor dieses Themas

Beiträge: 6

Registrierungsdatum: 29.08.2018

Derivat: Ubuntu

Architektur: 64-Bit PC

Desktop: GNOME 2.x

  • Nachricht senden

11

31.08.2018, 19:05

Zitat

Quellcode

1
sudo smartctl -a /dev/sdb     #Status der ersten SATA-Platte anzeigen 

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 117 minutes for test to complete.
Test will complete after Fri Aug 31 21:03:35 2018

Use smartctl -X to abort test.
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sdb 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: 	Toshiba 2.5" HDD MQ01ABF...
Device Model: 	TOSHIBA MQ01ABF050
Serial Number:	86IRP575T
LU WWN Device Id: 5 000039 732e871b7
Firmware Version: AM0B3J
User Capacity:	500.107.862.016 bytes [500 GB]
Sector Sizes: 	512 bytes logical, 4096 bytes physical
Rotation Rate:	5400 rpm
Form Factor:  	2.5 inches
Device is:    	In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:	Fri Aug 31 22:20:08 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:  	(   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:        	(0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:    	(0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 117) minutes.
SCT capabilities: 	   	(0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME      	FLAG 	VALUE WORST THRESH TYPE  	UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 	0x000b   100   100   050	Pre-fail  Always   	-   	0
  2 Throughput_Performance  0x0005   100   100   050	Pre-fail  Offline  	-   	0
  3 Spin_Up_Time        	0x0027   100   100   001	Pre-fail  Always   	-   	1315
  4 Start_Stop_Count    	0x0032   100   100   000	Old_age   Always   	-   	2257
  5 Reallocated_Sector_Ct   0x0033   100   100   050	Pre-fail  Always   	-   	0
  7 Seek_Error_Rate     	0x000b   100   100   050	Pre-fail  Always   	-   	0
  8 Seek_Time_Performance   0x0005   100   100   050	Pre-fail  Offline  	-   	0
  9 Power_On_Hours      	0x0032   094   094   000	Old_age   Always   	-   	2454
 10 Spin_Retry_Count    	0x0033   144   100   030	Pre-fail  Always   	-   	0
 12 Power_Cycle_Count   	0x0032   100   100   000	Old_age   Always   	-   	1056
191 G-Sense_Error_Rate  	0x0032   100   100   000	Old_age   Always   	-   	13
192 Power-Off_Retract_Count 0x0032   100   100   000	Old_age   Always   	-   	59
193 Load_Cycle_Count    	0x0032   094   094   000	Old_age   Always   	-   	62845
194 Temperature_Celsius 	0x0022   100   100   000	Old_age   Always   	-   	27 (Min/Max 9/44)
196 Reallocated_Event_Count 0x0032   100   100   000	Old_age   Always   	-   	0
197 Current_Pending_Sector  0x0032   100   100   000	Old_age   Always   	-   	0
198 Offline_Uncorrectable   0x0030   100   100   000	Old_age   Offline  	-   	0
199 UDMA_CRC_Error_Count	0x0032   200   253   000	Old_age   Always   	-   	156152
220 Disk_Shift          	0x0002   100   100   000	Old_age   Always   	-   	0
222 Loaded_Hours        	0x0032   096   096   000	Old_age   Always   	-   	1829
223 Load_Retry_Count    	0x0032   100   100   000	Old_age   Always   	-   	0
224 Load_Friction       	0x0022   100   100   000	Old_age   Always   	-   	0
226 Load-in_Time        	0x0026   100   100   000	Old_age   Always   	-   	256
240 Head_Flying_Hours   	0x0001   100   100   001	Pre-fail  Offline  	-   	0

SMART Error Log Version: 1
ATA Error Count: 65535 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 65535 occurred at disk power-on lifetime: 2433 hours (101 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 88 af 53 23 40  Error: ICRC, ABRT at LBA = 0x002353af = 2315183

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 c8 30 49 23 40 00  	00:23:33.770  WRITE FPDMA QUEUED
  61 40 c0 70 39 23 40 00  	00:23:33.770  WRITE FPDMA QUEUED
  61 40 b8 b0 3e 23 40 00  	00:23:33.770  WRITE FPDMA QUEUED
  61 40 b0 f0 43 23 40 00  	00:23:33.770  WRITE FPDMA QUEUED
  61 08 a8 70 63 23 40 00  	00:23:33.770  WRITE FPDMA QUEUED

Error 65534 occurred at disk power-on lifetime: 2433 hours (101 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 08 6f 4e 23 40  Error: ICRC, ABRT at LBA = 0x00234e6f = 2313839

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 48 f0 58 23 40 00  	00:23:33.379  WRITE FPDMA QUEUED
  61 40 40 30 5e 23 40 00  	00:23:33.379  WRITE FPDMA QUEUED
  61 08 38 70 63 23 40 00  	00:23:33.379  WRITE FPDMA QUEUED
  61 40 30 f0 43 23 40 00  	00:23:33.379  WRITE FPDMA QUEUED
  61 40 28 b0 3e 23 40 00  	00:23:33.379  WRITE FPDMA QUEUED

Error 65533 occurred at disk power-on lifetime: 2433 hours (101 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 70 af 53 23 40  Error: ICRC, ABRT at LBA = 0x002353af = 2315183

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 b8 70 39 23 40 00  	00:23:32.993  WRITE FPDMA QUEUED
  61 40 b0 b0 3e 23 40 00  	00:23:32.993  WRITE FPDMA QUEUED
  61 40 a8 f0 43 23 40 00  	00:23:32.993  WRITE FPDMA QUEUED
  61 40 a0 70 24 23 40 00  	00:23:32.993  WRITE FPDMA QUEUED
  61 40 98 b0 29 23 40 00  	00:23:32.993  WRITE FPDMA QUEUED

Error 65532 occurred at disk power-on lifetime: 2433 hours (101 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 48 2f f5 22 40  Error: ICRC, ABRT at LBA = 0x0022f52f = 2290991

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 90 f0 19 23 40 00  	00:23:32.601  WRITE FPDMA QUEUED
  61 40 88 30 1f 23 40 00  	00:23:32.601  WRITE FPDMA QUEUED
  61 40 80 b0 29 23 40 00  	00:23:32.601  WRITE FPDMA QUEUED
  61 40 78 70 24 23 40 00  	00:23:32.601  WRITE FPDMA QUEUED
  61 40 70 f0 43 23 40 00  	00:23:32.601  WRITE FPDMA QUEUED

Error 65531 occurred at disk power-on lifetime: 2433 hours (101 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 60 6f fa 22 40  Error: ICRC, ABRT at LBA = 0x0022fa6f = 2292335

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 40 a8 b0 29 23 40 00  	00:23:32.220  WRITE FPDMA QUEUED
  61 40 a0 30 1f 23 40 00  	00:23:32.220  WRITE FPDMA QUEUED
  61 40 98 f0 19 23 40 00  	00:23:32.220  WRITE FPDMA QUEUED
  61 40 90 b0 14 23 40 00  	00:23:32.220  WRITE FPDMA QUEUED
  61 40 88 70 0f 23 40 00  	00:23:32.220  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description	Status              	Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline	Completed without error   	00%  	2452     	-
# 2  Extended offline	Aborted by host           	50%  	2449     	-

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
	1    	0    	0  Not_testing
	2    	0    	0  Not_testing
	3    	0    	0  Not_testing
	4    	0    	0  Not_testing
	5    	0    	0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Zitat

Quellcode

1
					sudo smartctl -A /dev/sdb  #Abfrage der Attribute

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME      	FLAG 	VALUE WORST THRESH TYPE  	UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 	0x000b   100   100   050	Pre-fail  Always   	-   	0
  2 Throughput_Performance  0x0005   100   100   050	Pre-fail  Offline  	-   	0
  3 Spin_Up_Time        	0x0027   100   100   001	Pre-fail  Always   	-   	1315
  4 Start_Stop_Count    	0x0032   100   100   000	Old_age   Always   	-   	2257
  5 Reallocated_Sector_Ct   0x0033   100   100   050	Pre-fail  Always   	-   	0
  7 Seek_Error_Rate     	0x000b   100   100   050	Pre-fail  Always   	-   	0
  8 Seek_Time_Performance   0x0005   100   100   050	Pre-fail  Offline  	-   	0
  9 Power_On_Hours      	0x0032   094   094   000	Old_age   Always   	-   	2454
 10 Spin_Retry_Count    	0x0033   144   100   030	Pre-fail  Always   	-   	0
 12 Power_Cycle_Count   	0x0032   100   100   000	Old_age   Always   	-   	1056
191 G-Sense_Error_Rate  	0x0032   100   100   000	Old_age   Always   	-   	13
192 Power-Off_Retract_Count 0x0032   100   100   000	Old_age   Always   	-   	59
193 Load_Cycle_Count    	0x0032   094   094   000	Old_age   Always   	-   	62846
194 Temperature_Celsius 	0x0022   100   100   000	Old_age   Always   	-   	28 (Min/Max 9/44)
196 Reallocated_Event_Count 0x0032   100   100   000	Old_age   Always   	-   	0
197 Current_Pending_Sector  0x0032   100   100   000	Old_age   Always   	-   	0
198 Offline_Uncorrectable   0x0030   100   100   000	Old_age   Offline  	-   	0
199 UDMA_CRC_Error_Count	0x0032   200   253   000	Old_age   Always   	-   	156152
220 Disk_Shift          	0x0002   100   100   000	Old_age   Always   	-   	0
222 Loaded_Hours        	0x0032   096   096   000	Old_age   Always   	-   	1829
223 Load_Retry_Count    	0x0032   100   100   000	Old_age   Always   	-   	0
224 Load_Friction       	0x0022   100   100   000	Old_age   Always   	-   	0
226 Load-in_Time        	0x0026   100   100   000	Old_age   Always   	-   	252
240 Head_Flying_Hours   	0x0001   100   100   001	Pre-fail  Offline  	-   	0

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »panda-pirx« (31.08.2018, 22:24)