Ubuntu-Forum & Kubuntu-Forum | www.Ubuntu-Forum.de

Quellcode

xxxxxx@xxxxxx-xxxxxx:~$ sudo smartctl -c /dev/sda 
[sudo] Passwort für xxxxxx: 
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-35-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, [url]www.smartmontools.org[/url]einmal
einmal
=== START OF READ SMART DATA SECTION ===
General SMART Values:
Offline data collection status: (0x05) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 33) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline 
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.

xxxxxx@xxxxxx-xxxxxx:~$ Conveyance self-test routine
Conveyance: Befehl nicht gefunden.
xxxxxx@xxxxxx-xxxxxx:~$ sudo smartctl -t long /dev/sda 
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-35-generic] (local build) 
Copyright (C) 2002-14, Bruce Allen, Christian Franke, [url]www.smartmontools.org[/url] 

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === 
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. 
Testing has begun. 
Please wait 48 minutes for test to complete. 
Test will complete after Sat Apr 16 17:43:17 2016 

Use smartctl -X to abort test. 
xxxxxx@xxxxxx-xxxxxx:~$ sudo smartctl -l selftest /dev/sda 
[sudo] Passwort für xxxxxx: 
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-35-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, [url]www.smartmontools.org[/url]

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 82 -
# 2 Extended offline Interrupted (host reset) 10% 82 -
# 3 Short offline Completed without error 00% 72 -

xxxxxx@xxxxxx-xxxxxx:~$ sudo smartctl -a -d ata /dev/sda
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-35-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, [url]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: KINGSTON SV300S37A120G
Serial Number: 50026B72520AA9B5
LU WWN Device Id: 5 0026b7 2520aa9b5
Firmware Version: 580ABBF0
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Apr 16 17:48:31 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0032 120 120 050 Old_age Always - 2/0
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always - 83h+11m+02.630s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 93
171 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 40
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0
182 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
189 Airflow_Temperature_Cel 0x0000 028 034 000 Old_age Offline - 28 (Min/Max 16/34)
194 Temperature_Celsius 0x0022 028 034 000 Old_age Always - 28 (Min/Max 16/34)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 2/0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 2/0
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 2/0
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 129
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 143
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 143
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 279

SMART Error Log not supported

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 82 -
# 2 Extended offline Interrupted (host reset) 10% 82 -
# 3 Short offline Completed without error 00% 72 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

xxxxxx@xxxxxx-xxxxxx:~$ sudo smartctl -c /dev/sda 
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-35-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, [url]www.smartmontools.org[/url]

=== START OF READ SMART DATA SECTION ===
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.

xxxxxx@xxxxxx-xxxxxx:~$ sudo smartctl -t short /dev/sda 
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-35-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, [url]www.smartmontools.org[/url]

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Sat Apr 16 17:51:01 2016

Use smartctl -X to abort test.
xxxxxx@xxxxxx-xxxxxx:~$