Sie sind nicht angemeldet.

Lieber Besucher, herzlich willkommen bei: Ubuntu-Forum & Kubuntu-Forum | www.Ubuntu-Forum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

  • »haiko2201« ist der Autor dieses Themas

Beiträge: 16

Registrierungsdatum: 12.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

1

12.11.2008, 12:52

Frage zu lspci

Ich habe da mal eine Frage zu lspci und zwar habe ich mir einen Dueladapter gekauft. Dieser soll mir den PCI Express auf PCMCIA umwandeln. Klar es gibt z.Z. keinen Linux support. Ich möchte ihn auch nur mit vmware in xp nutzen. Wenn ich ihn einstecke, wird er aber mit lspci nicht angezeigt. Auch kein unbekanntes Gerät oder so. Ist das richtig so? Muss vielleicht eine Firmware installiert sein?
Wie funkt lspci und was zeigt er an? Gibt es andere Tests?
Danke Haiko
P.S. Ich habe zwei Dell Inspiron 1525n (identisch) , funkt in beiden nicht. ABER einmal habe ich, ganz kurz, Texas Instruments Brigde ...irgentwas gesehen. Der Dueladapter hat TI chipset!

  • »maettu« ist männlich

Beiträge: 3 299

Registrierungsdatum: 14.09.2005

Derivat: Xubuntu

Architektur: 64-Bit PC

Desktop: XFCE

  • Nachricht senden

2

12.11.2008, 14:58

Zitat

Ich möchte ihn auch nur mit vmware in xp nutzen.
könntest du mal genau sagen, was du willst??? Sprich uns mitteilen ob XP also Host genutzt wird und Ubuntu als Guest. Oder XP als Guest und Ubuntu also Host. Dann würd ich mal noch schauen, welche Schnittstellen von vmware Unterstützt werden, bin mir nicht ganz sicher, aber glaube vmware unterstützt keine PCMCIA....

  • »haiko2201« ist der Autor dieses Themas

Beiträge: 16

Registrierungsdatum: 12.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

3

12.11.2008, 17:50

ich rede von Ubuntu als host, doch bevor vmware ins Spiel kommt sollte Ubuntu irgendetwas dazu sagen.

  • »maettu« ist männlich

Beiträge: 3 299

Registrierungsdatum: 14.09.2005

Derivat: Xubuntu

Architektur: 64-Bit PC

Desktop: XFCE

  • Nachricht senden

4

12.11.2008, 22:58

schön und gut, aber wenn vmware keine PCMCIA unterstützt, dann kannst du dir sparen, dein "Dueladapter" zum laufen zu bringen....

Zitat

sudo lshw
zeigt dir vielleicht ein paar infos mehr als lspci, sonst kann ich dir leider nicht weiter helfen....

  • »Maltin« ist männlich

Beiträge: 829

Registrierungsdatum: 11.06.2008

Architektur: 32-Bit PC

Andere Betriebssysteme: Archlinux, Debian

  • Nachricht senden

5

13.11.2008, 09:45

Zitat

Klar es gibt z.Z. keinen Linux support. Ich möchte ihn auch nur mit vmware in xp nutzen.


Ich nicht schwimmen. Aber ich will doch nur einmal die Themse durchqueren. [/ironie]

Also wenn du diesen Satz ernst meinst, dann hast du wohl etwas nicht verstanden.
"Wer nicht mit der Zeit geht, muss mit der Zeit ... gehen."

  • »haiko2201« ist der Autor dieses Themas

Beiträge: 16

Registrierungsdatum: 12.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

6

13.11.2008, 10:56


Zitat

Klar es gibt z.Z. keinen Linux support. Ich möchte ihn auch nur mit vmware in xp nutzen.


Ich nicht schwimmen. Aber ich will doch nur einmal die Themse durchqueren. [/ironie]

Also wenn du diesen Satz ernst meinst, dann hast du wohl etwas nicht verstanden.
Klar, meine ich das erst. Ich hatte neulich in Finnland so ein USB-UMTS-Modem, in Linux ging nix, außer dass es mit lsusb angezeigt wurde. Doch in vmware-xp lief es.

Aber meine Frage ist, wenn ich ein Gerät in den Express-slot stecke muss es angezeigt werden oder nicht. Wenn nein was braucht es?
Ich denke mir, jedes Gerät schickt irgendeine Info an den Bus damit es einem Treiber oder einer Firmware zugeordnet werden kann.
Ist das so?
Haiko

  • »Maltin« ist männlich

Beiträge: 829

Registrierungsdatum: 11.06.2008

Architektur: 32-Bit PC

Andere Betriebssysteme: Archlinux, Debian

  • Nachricht senden

7

13.11.2008, 12:46

Wenn du die PCMCIA-Karte (was genau hast du da eigentlich?) ansteckst, spuckt dann

Quellcode

1
lspcmcia
etwas aus?
"Wer nicht mit der Zeit geht, muss mit der Zeit ... gehen."

  • »haiko2201« ist der Autor dieses Themas

Beiträge: 16

Registrierungsdatum: 12.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

8

13.11.2008, 21:57


Wenn du die PCMCIA-Karte (was genau hast du da eigentlich?) ansteckst, spuckt dann

Quellcode

1
lspcmcia


etwas aus?

Quellcode

1
2
lspcmcia
bash: lspcmpcia: command not found

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »haiko2201« (13.11.2008, 21:57)


  • »Maltin« ist männlich

Beiträge: 829

Registrierungsdatum: 11.06.2008

Architektur: 32-Bit PC

Andere Betriebssysteme: Archlinux, Debian

  • Nachricht senden

9

14.11.2008, 10:10

Zitat

lspcmcia
bash: lspcmpcia: command not found


Du solltest etwas gründlicher im Terminal sein.
"Wer nicht mit der Zeit geht, muss mit der Zeit ... gehen."

  • »haiko2201« ist der Autor dieses Themas

Beiträge: 16

Registrierungsdatum: 12.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

10

14.11.2008, 14:29

nee geht glatt durch, ohne was zu sagen.

  • »Maltin« ist männlich

Beiträge: 829

Registrierungsdatum: 11.06.2008

Architektur: 32-Bit PC

Andere Betriebssysteme: Archlinux, Debian

  • Nachricht senden

11

14.11.2008, 15:23

Und deine angesteckte PCMCIA findest du auch nicht unter lspci?
Was für ein Gerät verwendest du denn eigentlich? eine WLAN-Karte?
"Wer nicht mit der Zeit geht, muss mit der Zeit ... gehen."

12

14.11.2008, 15:39

Wenn ich ihn einstecke, wird er aber mit lspci nicht angezeigt
Was gibt es überhaupt aus? Und eventuell:

Quellcode

1
hwinfo --pci --pcmcia

  • »haiko2201« ist der Autor dieses Themas

Beiträge: 16

Registrierungsdatum: 12.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

13

14.11.2008, 23:34


Wenn ich ihn einstecke, wird er aber mit lspci nicht angezeigt
Was gibt es überhaupt aus? Und eventuell:

Quellcode

1
hwinfo --pci --pcmcia
Wenn ich nur --pcmcia abfrage sagt er nix, bei --pci ist es zu viel. Wie kann ich das noch mal in eine Datei schieben?

14

15.11.2008, 00:54

Quellcode

1
hwinfo --pci > hwinfo.txt

  • »haiko2201« ist der Autor dieses Themas

Beiträge: 16

Registrierungsdatum: 12.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

15

16.11.2008, 13:46

Und deine angesteckte PCMCIA findest du auch nicht unter lspci?
Was für ein Gerät verwendest du denn eigentlich? eine WLAN-Karte?
Brauche eine ATA-Flash Speicherkarte und von Siemens einen MPI-Profobus Adapter. Ist für die Arbeit zum programmieren von CNC-Maschinen.

16

16.11.2008, 13:57

Wie soll man helfen, wenn man die dafür nötigen Infos nicht bekommt...
CU
Beim Erstellen dieser Nachricht kamen keine Tiere zu Schaden.
me is all sausage
but don't call me Ferdl

  • »haiko2201« ist der Autor dieses Themas

Beiträge: 16

Registrierungsdatum: 12.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

17

16.11.2008, 16:06

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
09: PCI 209.4: 0880 System peripheral
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_1180_852
  Unique ID: LMUk.t1iRhH3P6x4
  Parent ID: 6NW+.HDtZ0uvxgyC
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:09.4
  SysFS BusID: 0000:02:09.4
  Hardware Class: unknown
  Model: "Dell xD-Picture Card Controller"
  Vendor: pci 0x1180 "Ricoh Co Ltd"
  Device: pci 0x0852 "xD-Picture Card Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0xff
  Memory Range: 0xfe3ff700-0xfe3ff7ff (rw,non-prefetchable)
  IRQ: 5 (no events)
  Module Alias: "pci:v00001180d00000852sv00001028sd0000022Fbc08sc80i00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (PCI bridge)

10: PCI 209.3: 0880 System peripheral
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_1180_592
  Unique ID: T1+u.lwHjNZ5QX35
  Parent ID: 6NW+.HDtZ0uvxgyC
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:09.3
  SysFS BusID: 0000:02:09.3
  Hardware Class: unknown
  Model: "Dell R5C592 Memory Stick Bus Host Adapter"
  Vendor: pci 0x1180 "Ricoh Co Ltd"
  Device: pci 0x0592 "R5C592 Memory Stick Bus Host Adapter"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x12
  Memory Range: 0xfe3ff600-0xfe3ff6ff (rw,non-prefetchable)
  IRQ: 5 (no events)
  Module Alias: "pci:v00001180d00000592sv00001028sd0000022Fbc08sc80i00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (PCI bridge)

11: PCI 209.2: 0880 System peripheral
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_1180_843
  Unique ID: ciV3.xLKJZQAq+CD
  Parent ID: 6NW+.HDtZ0uvxgyC
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:09.2
  SysFS BusID: 0000:02:09.2
  Hardware Class: unknown
  Model: "Dell System peripheral"
  Vendor: pci 0x1180 "Ricoh Co Ltd"
  Device: pci 0x0843 
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x12
  Driver: "ricoh-mmc"
  Driver Modules: "ricoh_mmc"
  Memory Range: 0xfe3ff500-0xfe3ff5ff (rw,non-prefetchable)
  IRQ: 5 (no events)
  Module Alias: "pci:v00001180d00000843sv00001028sd0000022Fbc08sc80i00"
  Driver Info #0:
	Driver Status: ricoh_mmc is active
	Driver Activation Cmd: "modprobe ricoh_mmc"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (PCI bridge)

12: PCI 209.1: 0805 Generic system peripheral
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_1180_822
  Unique ID: kN0E.m0HA7rNdYMB
  Parent ID: 6NW+.HDtZ0uvxgyC
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:09.1
  SysFS BusID: 0000:02:09.1
  Hardware Class: unknown
  Model: "Dell R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter"
  Vendor: pci 0x1180 "Ricoh Co Ltd"
  Device: pci 0x0822 "R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x22
  Driver: "sdhci"
  Driver Modules: "sdhci"
  Memory Range: 0xfe3ff400-0xfe3ff4ff (rw,non-prefetchable)
  IRQ: 21 (285 events)
  Module Alias: "pci:v00001180d00000822sv00001028sd0000022Fbc08sc05i01"
  Driver Info #0:
	Driver Status: sdhci is active
	Driver Activation Cmd: "modprobe sdhci"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (PCI bridge)

13: PCI 209.0: 0c00 FireWire (IEEE 1394) (OHCI)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_1180_832
  Unique ID: t2XO.nY1M2IANYjD
  Parent ID: 6NW+.HDtZ0uvxgyC
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:09.0
  SysFS BusID: 0000:02:09.0
  Hardware Class: firewire controller
  Model: "Dell FireWire (IEEE 1394)"
  Vendor: pci 0x1180 "Ricoh Co Ltd"
  Device: pci 0x0832 
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x05
  Driver: "ohci1394"
  Driver Modules: "ohci1394"
  Memory Range: 0xfe3ff800-0xfe3fffff (rw,non-prefetchable)
  IRQ: 16 (519672 events)
  Module Alias: "pci:v00001180d00000832sv00001028sd0000022Fbc0Csc00i10"
  Driver Info #0:
	Driver Status: ohci1394 is active
	Driver Activation Cmd: "modprobe ohci1394"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #20 (PCI bridge)

14: PCI b00.0: 0282 WLAN controller
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_4222
  Unique ID: y9sn.PZB6OQ9BaVB
  Parent ID: qTvu.TkjeLK60Af8
  SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0b:00.0
  SysFS BusID: 0000:0b:00.0
  Hardware Class: network
  Model: "Intel PRO/Wireless 3945ABG Network Connection"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x4222 "PRO/Wireless 3945ABG Network Connection"
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x1021 
  Revision: 0x02
  Driver: "iwl3945"
  Driver Modules: "iwl3945"
  Device File: wlan0
  Device Files: wlan0, wmaster0
  Features: WLAN
  Memory Range: 0xfe7ff000-0xfe7fffff (rw,non-prefetchable)
  IRQ: 218 (377512 events)
  HW Address: 00:1f:3c:a3:c4:59
  Link detected: yes
  Module Alias: "pci:v00008086d00004222sv00008086sd00001021bc02sc80i00"
  Driver Info #0:
	Driver Status: iwl3945 is active
	Driver Activation Cmd: "modprobe iwl3945"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #26 (PCI bridge)

15: PCI 900.0: 0200 Ethernet controller
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_11ab_4354
  Unique ID: rBUF.4UBfJT4u929
  Parent ID: z8Q3.Rvq8OBtb6u7
  SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:09:00.0
  SysFS BusID: 0000:09:00.0
  Hardware Class: network
  Model: "Dell Ethernet controller"
  Vendor: pci 0x11ab "Marvell Technology Group Ltd."
  Device: pci 0x4354 
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x12
  Driver: "sky2"
  Driver Modules: "sky2"
  Device File: eth0
  Memory Range: 0xfe8fc000-0xfe8fffff (rw,non-prefetchable)
  I/O Ports: 0xde00-0xdeff (rw)
  IRQ: 219 (1 event)
  HW Address: 00:1d:09:62:47:6f
  Link detected: no
  Module Alias: "pci:v000011ABd00004354sv00001028sd0000022Fbc02sc00i00"
  Driver Info #0:
	Driver Status: sky2 is active
	Driver Activation Cmd: "modprobe sky2"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #27 (PCI bridge)

16: PCI 1f.3: 0c05 SMBus
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_283e
  Unique ID: nS1_.ybXtoHSEmq7
  SysFS ID: /devices/pci0000:00/0000:00:1f.3
  SysFS BusID: 0000:00:1f.3
  Hardware Class: unknown
  Model: "Dell SMBus Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x283e "SMBus Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Memory Range: 0xfe9fb700-0xfe9fb7ff (rw,non-prefetchable)
  I/O Ports: 0x10c0-0x10df (rw)
  IRQ: 10 (no events)
  Module Alias: "pci:v00008086d0000283Esv00001028sd0000022Fbc0Csc05i00"
  Driver Info #0:
	Driver Status: i2c_i801 is not active
	Driver Activation Cmd: "modprobe i2c_i801"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

17: PCI 1f.2: 0106 SATA controller (AHCI 1.0)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2829
  Unique ID: w7Y8.UzPM47i7I66
  SysFS ID: /devices/pci0000:00/0000:00:1f.2
  SysFS BusID: 0000:00:1f.2
  Hardware Class: storage
  Model: "Dell Mobile SATA Controller AHCI"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2829 "Mobile SATA Controller AHCI"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "ahci"
  Driver Modules: "ahci"
  I/O Ports: 0x6eb0-0x6eb7 (rw)
  I/O Ports: 0x6eb8-0x6ebb (rw)
  I/O Ports: 0x6ec0-0x6ec7 (rw)
  I/O Ports: 0x6ec8-0x6ecb (rw)
  I/O Ports: 0x6ee0-0x6eff (rw)
  Memory Range: 0xfe9fb800-0xfe9fbfff (rw,non-prefetchable)
  IRQ: 220 (46291 events)
  Module Alias: "pci:v00008086d00002829sv00001028sd0000022Fbc01sc06i01"
  Driver Info #0:
	Driver Status: ahci is active
	Driver Activation Cmd: "modprobe ahci"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

18: PCI 1f.1: 0101 IDE interface
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2850
  Unique ID: 3p2J.9ofsTQo+6e6
  SysFS ID: /devices/pci0000:00/0000:00:1f.1
  SysFS BusID: 0000:00:1f.1
  Hardware Class: storage
  Model: "Dell Mobile IDE Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2850 "Mobile IDE Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "ata_piix"
  Driver Modules: "ata_piix"
  I/O Ports: 0x1f0-0x1f7 (rw)
  I/O Port: 0x3f6 (rw)
  I/O Ports: 0x170-0x177 (rw)
  I/O Port: 0x376 (rw)
  I/O Ports: 0x6fa0-0x6faf (rw)
  IRQ: 16 (519672 events)
  Module Alias: "pci:v00008086d00002850sv00001028sd0000022Fbc01sc01i8a"
  Driver Info #0:
	Driver Status: ata_piix is active
	Driver Activation Cmd: "modprobe ata_piix"
  Driver Info #1:
	Driver Status: pata_acpi is active
	Driver Activation Cmd: "modprobe pata_acpi"
  Driver Info #2:
	Driver Status: ata_generic is active
	Driver Activation Cmd: "modprobe ata_generic"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

19: PCI 1f.0: 0601 ISA bridge
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2815
  Unique ID: BUZT.fskqzHXAiJ5
  SysFS ID: /devices/pci0000:00/0000:00:1f.0
  SysFS BusID: 0000:00:1f.0
  Hardware Class: bridge
  Model: "Dell Mobile LPC Interface Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2815 "Mobile LPC Interface Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Module Alias: "pci:v00008086d00002815sv00001028sd0000022Fbc06sc01i00"
  Driver Info #0:
	Driver Status: iTCO_wdt is active
	Driver Activation Cmd: "modprobe iTCO_wdt"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

20: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2448
  Unique ID: 6NW+.HDtZ0uvxgyC
  SysFS ID: /devices/pci0000:00/0000:00:1e.0
  SysFS BusID: 0000:00:1e.0
  Hardware Class: bridge
  Model: "Intel 82801 Mobile PCI Bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2448 "82801 Mobile PCI Bridge"
  Revision: 0xf2
  Module Alias: "pci:v00008086d00002448sv00000000sd00000000bc06sc04i01"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

21: PCI 1d.7: 0c03 USB Controller (EHCI)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2836
  Unique ID: 5YuN.IthejIe0gnC
  SysFS ID: /devices/pci0000:00/0000:00:1d.7
  SysFS BusID: 0000:00:1d.7
  Hardware Class: usb controller
  Model: "Dell USB2 EHCI Controller #1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2836 "USB2 EHCI Controller #1"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "ehci_hcd"
  Driver Modules: "ehci_hcd"
  Memory Range: 0xfed1c000-0xfed1c3ff (rw,non-prefetchable)
  IRQ: 18 (33 events)
  Module Alias: "pci:v00008086d00002836sv00001028sd0000022Fbc0Csc03i20"
  Driver Info #0:
	Driver Status: ehci-hcd is active
	Driver Activation Cmd: "modprobe ehci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

22: PCI 1d.2: 0c03 USB Controller (UHCI)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2832
  Unique ID: mvRC.kCKTWygR1Q6
  SysFS ID: /devices/pci0000:00/0000:00:1d.2
  SysFS BusID: 0000:00:1d.2
  Hardware Class: usb controller
  Model: "Dell USB UHCI Controller #3"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2832 "USB UHCI Controller #3"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x6f40-0x6f5f (rw)
  IRQ: 20 (495567 events)
  Module Alias: "pci:v00008086d00002832sv00001028sd0000022Fbc0Csc03i00"
  Driver Info #0:
	Driver Status: uhci-hcd is active
	Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

23: PCI 1d.1: 0c03 USB Controller (UHCI)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2831
  Unique ID: vayM.DoNj1OZkV16
  SysFS ID: /devices/pci0000:00/0000:00:1d.1
  SysFS BusID: 0000:00:1d.1
  Hardware Class: usb controller
  Model: "Dell USB UHCI Controller #2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2831 "USB UHCI Controller #2"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x6f60-0x6f7f (rw)
  IRQ: 19 (39366 events)
  Module Alias: "pci:v00008086d00002831sv00001028sd0000022Fbc0Csc03i00"
  Driver Info #0:
	Driver Status: uhci-hcd is active
	Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

24: PCI 1d.0: 0c03 USB Controller (UHCI)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2830
  Unique ID: 1GTX.iNRzYpR1_e5
  SysFS ID: /devices/pci0000:00/0000:00:1d.0
  SysFS BusID: 0000:00:1d.0
  Hardware Class: usb controller
  Model: "Dell USB UHCI Controller #1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2830 "USB UHCI Controller #1"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x6f80-0x6f9f (rw)
  IRQ: 18 (33 events)
  Module Alias: "pci:v00008086d00002830sv00001028sd0000022Fbc0Csc03i00"
  Driver Info #0:
	Driver Status: uhci-hcd is active
	Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

25: PCI 1c.4: 0604 PCI bridge (Normal decode)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2847
  Unique ID: QSNP.ZDO8ElpEKyA
  SysFS ID: /devices/pci0000:00/0000:00:1c.4
  SysFS BusID: 0000:00:1c.4
  Hardware Class: bridge
  Model: "Intel PCI Express Port 5"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2847 "PCI Express Port 5"
  Revision: 0x02
  Driver: "pcieport-driver"
  IRQ: 221 (no events)
  Module Alias: "pci:v00008086d00002847sv00000000sd00000000bc06sc04i00"
  Driver Info #0:
	Driver Status: shpchp is active
	Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

26: PCI 1c.1: 0604 PCI bridge (Normal decode)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2841
  Unique ID: qTvu.TkjeLK60Af8
  SysFS ID: /devices/pci0000:00/0000:00:1c.1
  SysFS BusID: 0000:00:1c.1
  Hardware Class: bridge
  Model: "Intel PCI Express Port 2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2841 "PCI Express Port 2"
  Revision: 0x02
  Driver: "pcieport-driver"
  IRQ: 222 (no events)
  Module Alias: "pci:v00008086d00002841sv00000000sd00000000bc06sc04i00"
  Driver Info #0:
	Driver Status: shpchp is active
	Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

27: PCI 1c.0: 0604 PCI bridge (Normal decode)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_283f
  Unique ID: z8Q3.Rvq8OBtb6u7
  SysFS ID: /devices/pci0000:00/0000:00:1c.0
  SysFS BusID: 0000:00:1c.0
  Hardware Class: bridge
  Model: "Intel PCI Express Port 1"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x283f "PCI Express Port 1"
  Revision: 0x02
  Driver: "pcieport-driver"
  IRQ: 223 (no events)
  Module Alias: "pci:v00008086d0000283Fsv00000000sd00000000bc06sc04i00"
  Driver Info #0:
	Driver Status: shpchp is active
	Driver Activation Cmd: "modprobe shpchp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

28: PCI 1b.0: 0403 Audio device
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_284b
  Unique ID: u1Nb.VhUtPypIg0D
  SysFS ID: /devices/pci0000:00/0000:00:1b.0
  SysFS BusID: 0000:00:1b.0
  Hardware Class: sound
  Model: "Dell HD Audio Controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x284b "HD Audio Controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "HDA Intel"
  Driver Modules: "snd_hda_intel"
  Memory Range: 0xfe9fc000-0xfe9fffff (rw,non-prefetchable)
  IRQ: 19 (39366 events)
  Module Alias: "pci:v00008086d0000284Bsv00001028sd0000022Fbc04sc03i00"
  Driver Info #0:
	Driver Status: snd_hda_intel is active
	Driver Activation Cmd: "modprobe snd_hda_intel"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

29: PCI 1a.7: 0c03 USB Controller (EHCI)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_283a
  Unique ID: sClz.MXTeeWS3nuC
  SysFS ID: /devices/pci0000:00/0000:00:1a.7
  SysFS BusID: 0000:00:1a.7
  Hardware Class: usb controller
  Model: "Dell USB2 EHCI Controller #2"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x283a "USB2 EHCI Controller #2"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "ehci_hcd"
  Driver Modules: "ehci_hcd"
  Memory Range: 0xfed1c400-0xfed1c7ff (rw,non-prefetchable)
  IRQ: 20 (495567 events)
  Module Alias: "pci:v00008086d0000283Asv00001028sd0000022Fbc0Csc03i20"
  Driver Info #0:
	Driver Status: ehci-hcd is active
	Driver Activation Cmd: "modprobe ehci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

30: PCI 1a.1: 0c03 USB Controller (UHCI)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2835
  Unique ID: gFpy.HS9jyf1ZcZ7
  SysFS ID: /devices/pci0000:00/0000:00:1a.1
  SysFS BusID: 0000:00:1a.1
  Hardware Class: usb controller
  Model: "Dell USB UHCI Controller #5"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2835 "USB UHCI Controller #5"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x6f00-0x6f1f (rw)
  IRQ: 19 (39366 events)
  Module Alias: "pci:v00008086d00002835sv00001028sd0000022Fbc0Csc03i00"
  Driver Info #0:
	Driver Status: uhci-hcd is active
	Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

31: PCI 1a.0: 0c03 USB Controller (UHCI)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2834
  Unique ID: pwJ7.m1DzT5wr4B7
  SysFS ID: /devices/pci0000:00/0000:00:1a.0
  SysFS BusID: 0000:00:1a.0
  Hardware Class: usb controller
  Model: "Dell USB UHCI Controller #4"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2834 "USB UHCI Controller #4"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x02
  Driver: "uhci_hcd"
  Driver Modules: "uhci_hcd"
  I/O Ports: 0x6f20-0x6f3f (rw)
  IRQ: 18 (33 events)
  Module Alias: "pci:v00008086d00002834sv00001028sd0000022Fbc0Csc03i00"
  Driver Info #0:
	Driver Status: uhci-hcd is active
	Driver Activation Cmd: "modprobe uhci-hcd"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

32: PCI 02.1: 0380 Display controller
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2a03
  Unique ID: ruGf.Fls7hspaQUD
  SysFS ID: /devices/pci0000:00/0000:00:02.1
  SysFS BusID: 0000:00:02.1
  Hardware Class: graphics card
  Model: "Dell Display controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2a03 
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x0c
  Memory Range: 0xfeb00000-0xfebfffff (rw,non-prefetchable)
  Module Alias: "pci:v00008086d00002A03sv00001028sd0000022Fbc03sc80i00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

33: PCI 02.0: 0300 VGA compatible controller (VGA)
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2a02
  Unique ID: _Znp.kIVVn0Xw8t7
  SysFS ID: /devices/pci0000:00/0000:00:02.0
  SysFS BusID: 0000:00:02.0
  Hardware Class: graphics card
  Model: "Dell 965 GM"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2a02 "965 GM"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x0c
  Memory Range: 0xfea00000-0xfeafffff (rw,non-prefetchable)
  Memory Range: 0xe0000000-0xefffffff (rw,prefetchable)
  I/O Ports: 0xeff8-0xefff (rw)
  IRQ: 16 (519672 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00008086d00002A02sv00001028sd0000022Fbc03sc00i00"
  Driver Info #0:
	XFree86 v4 Server Module: intel
  Driver Info #1:
	XFree86 v4 Server Module: intel
	3D Support: yes
	Extensions: dri
  Config Status: cfg=new, avail=yes, need=no, active=unknown

34: PCI 00.0: 0600 Host bridge
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_8086_2a00
  Unique ID: qLht.lwGlMizFQhB
  SysFS ID: /devices/pci0000:00/0000:00:00.0
  SysFS BusID: 0000:00:00.0
  Hardware Class: bridge
  Model: "Dell Host bridge"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x2a00 
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x022f 
  Revision: 0x0c
  Driver: "agpgart-intel"
  Driver Modules: "intel_agp"
  Module Alias: "pci:v00008086d00002A00sv00001028sd0000022Fbc06sc00i00"
  Driver Info #0:
	Driver Status: intel_agp is active
	Driver Activation Cmd: "modprobe intel_agp"
  Config Status: cfg=new, avail=yes, need=no, active=unknown


Ich denke, dass ich mal in den saueren Apfel beißen muss und xp aufsetzen werde. Aus dem Grund um meinen Hardware zu testen. Der pci-express-slot kommt mir so komisch laberig vor. Da sollte der Dueladapter ja laufen.

Zurzeit sind neben Ihnen 2 Benutzer in diesem Thema unterwegs:

2 Besucher