Sie sind nicht angemeldet.

PhiBa

User

  • »PhiBa« ist männlich
  • »PhiBa« ist der Autor dieses Themas

Beiträge: 5

Registrierungsdatum: 03.11.2008

Derivat: Xubuntu

Architektur: 32-Bit PC

  • Nachricht senden

1

03.11.2008, 13:54

Pinnacle Hybrid Pro unter Intrepid

Hallo!

Nach einem Update von Hardy auf Intrepid konnte ich meinen Pinnacle USB Hybrid Pro Stick nicht mehr nach dieser Anleitung zum laufen bringen:
http://xrob.wordpress.com/2006/12/29/pin…0-installation/

Das hat sonst immer geklappt. Diesmal scheiterte es am kompilieren.

Laut http://wiki.ubuntuusers.de/em28xx sollte das auch eigentlich nicht mehr nötig sein, da der Stick ab Intrepid unterstützt wird, wenn ich das richtig verstanden habe. Die Frage ist nun, was ich dafür machen muss, weil so wirklich von alleine läuft da nichts. Die Firmware habe ich installiert.

Hier mal ein paar Ausgaben, die vielleicht interessant sind:

sudo lsusb -v | grep iProductdmesg | grep em28
iProduct 1 USB 2881 Video

dmesg | grep em28

[ 17.426111] em28xx v4l2 driver version 0.1.0 loaded
[ 17.426229] em28xx new video device (eb1a:2881): interface 0, class 255
[ 17.426235] em28xx Has usb audio class
[ 17.426237] em28xx #0: Alternate settings: 8
[ 17.426239] em28xx #0: Alternate setting 0, max size= 0
[ 17.426242] em28xx #0: Alternate setting 1, max size= 0
[ 17.426244] em28xx #0: Alternate setting 2, max size= 1448
[ 17.426246] em28xx #0: Alternate setting 3, max size= 2048
[ 17.426248] em28xx #0: Alternate setting 4, max size= 2304
[ 17.426251] em28xx #0: Alternate setting 5, max size= 2580
[ 17.426253] em28xx #0: Alternate setting 6, max size= 2892
[ 17.426255] em28xx #0: Alternate setting 7, max size= 3072
[ 17.427374] em28xx #0: chip ID is em2882/em2883
[ 17.490882] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 17.490892] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 17.490901] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 17.490909] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 17.490916] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.490924] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.490931] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 17.490939] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 17.490947] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 17.490954] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.490962] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.490969] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.490977] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.490984] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.490992] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
[ 17.490999] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 17.631907] em28xx #0: found i2c device @ 0xa0 [eeprom]
[ 17.649904] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
[ 17.657443] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
[ 17.704405] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
[ 17.704412] em28xx #0: You may try to use card=<n> insmod option to workaround that.
[ 17.704415] em28xx #0: Please send an email with this log to:
[ 17.704417] em28xx #0: V4L Mailing List <[email]video4linux-list@redhat.com[/email]>
[ 17.704419] em28xx #0: Board eeprom hash is 0xb8846b20
[ 17.704421] em28xx #0: Board i2c devicelist hash is 0x27e10080
[ 17.704423] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[ 17.704426] em28xx #0: card=0 -> Unknown EM2800 video grabber
[ 17.704429] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
[ 17.704431] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[ 17.704433] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[ 17.704435] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[ 17.704437] em28xx #0: card=5 -> MSI VOX USB 2.0
[ 17.704439] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[ 17.704441] em28xx #0: card=7 -> Leadtek Winfast USB II
[ 17.704443] em28xx #0: card=8 -> Kworld USB2800
[ 17.704445] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/DVC 100
[ 17.704448] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[ 17.704450] em28xx #0: card=11 -> Terratec Hybrid XS
[ 17.704452] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[ 17.704454] em28xx #0: card=13 -> Terratec Prodigy XS
[ 17.704456] em28xx #0: card=14 -> Pixelview Prolink PlayTV USB 2.0
[ 17.704458] em28xx #0: card=15 -> V-Gear PocketTV
[ 17.704460] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[ 17.704462] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[ 17.704464] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[ 17.704467] em28xx #0: card=19 -> PointNix Intra-Oral Camera
[ 17.704469] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[ 17.704471] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder
[ 17.704473] em28xx #0: card=22 -> Unknown EM2750/EM2751 webcam grabber
[ 17.704476] em28xx #0: card=23 -> Huaqi DLCW-130
[ 17.704478] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[ 17.704480] em28xx #0: card=25 -> Gadmei UTV310
[ 17.704482] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[ 17.704484] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME)
[ 17.704486] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[ 17.704489] em28xx #0: card=29 -> Pinnacle Dazzle DVC 100
[ 17.704491] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[ 17.704493] em28xx #0: card=31 -> Usbgear VD204v9
[ 17.704495] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[ 17.704497] em28xx #0: card=33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0
[ 17.704499] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[ 17.704530] em28xx #0: card=35 -> Typhoon DVD Maker
[ 17.704532] em28xx #0: card=36 -> NetGMBH Cam
[ 17.704534] em28xx #0: card=37 -> Gadmei UTV330
[ 17.704536] em28xx #0: card=38 -> Yakumo MovieMixer
[ 17.704538] em28xx #0: card=39 -> KWorld PVRTV 300U
[ 17.704540] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[ 17.704542] em28xx #0: card=41 -> Kworld 350 U DVB-T
[ 17.704544] em28xx #0: card=42 -> Kworld 355 U DVB-T
[ 17.704547] em28xx #0: card=43 -> Terratec Cinergy T XS
[ 17.704549] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[ 17.704551] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[ 17.704553] em28xx #0: card=46 -> Compro, VideoMate U3
[ 17.704555] em28xx #0: card=47 -> KWorld DVB-T 305U
[ 17.704557] em28xx #0: card=48 -> KWorld DVB-T 310U
[ 17.704559] em28xx #0: card=49 -> MSI DigiVox A/D
[ 17.704561] em28xx #0: card=50 -> MSI DigiVox A/D II
[ 17.704563] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[ 17.704565] em28xx #0: card=52 -> DNT DA2 Hybrid
[ 17.704567] em28xx #0: card=53 -> Pinnacle Hybrid Pro
[ 17.704569] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[ 17.704572] em28xx #0: card=55 -> Terratec Hybrid XS (em2882)
[ 17.704574] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2)
[ 17.704576] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330
[ 17.704578] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo
[ 18.128965] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 18.128969] em28xx #0: Found Unknown EM2750/28xx video grabber
[ 18.128988] em28xx audio device (eb1a:2881): interface 1, class 1
[ 18.128998] em28xx audio device (eb1a:2881): interface 2, class 1
[ 18.129030] usbcore: registered new interface driver em28xx

nachdem das gelesen habe, habe ich
modprobe -r em28xx-alsa
modprobe -r em28xx-dvb
modprobe -r em28xx

gemacht

und dann

modprobe em28xx card=53
modprobe em28xx-alsa
modprobe em28xx-dvb

dmesg | grep em28

ergab zusätzlich zu dem oberen Text:

[ 754.560036] usbcore: deregistering interface driver em28xx
[ 754.560099] em28xx #0: disconnecting em28xx #0 video
[ 754.560106] em28xx #0: V4L2 devices /dev/video0 and /dev/vbi0 deregistered

[ 778.996646] em28xx v4l2 driver version 0.1.0 loaded
[ 778.996736] usbcore: registered new interface driver em28xx
[ 796.237101] em28xx new video device (eb1a:2881): interface 0, class 255
[ 796.237138] em28xx Has usb audio class
[ 796.237142] em28xx #0: Alternate settings: 8
[ 796.237148] em28xx #0: Alternate setting 0, max size= 0
[ 796.237152] em28xx #0: Alternate setting 1, max size= 0
[ 796.237157] em28xx #0: Alternate setting 2, max size= 1448
[ 796.237162] em28xx #0: Alternate setting 3, max size= 2048
[ 796.237166] em28xx #0: Alternate setting 4, max size= 2304
[ 796.237171] em28xx #0: Alternate setting 5, max size= 2580
[ 796.237176] em28xx #0: Alternate setting 6, max size= 2892
[ 796.237180] em28xx #0: Alternate setting 7, max size= 3072
[ 796.287853] em28xx #0: chip ID is em2882/em2883
[ 796.505202] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 796.505232] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 796.505252] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 796.505271] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 796.505289] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 796.505307] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 796.505325] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 796.505344] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 796.505362] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 796.505380] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 796.505398] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 796.505416] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 796.505434] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 796.505452] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 796.505470] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
[ 796.505489] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 796.505534] em28xx #0:
[ 796.505541] em28xx #0: The support for this board weren't valid yet.
[ 796.505546] em28xx #0: Please send a report of having this working
[ 796.505551] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 796.607849] tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
[ 798.849649] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 798.849667] em28xx #0: Found Pinnacle Hybrid Pro (2)
[ 1193.012552] usbcore: deregistering interface driver em28xx
[ 1193.012614] em28xx #0: disconnecting em28xx #0 video
[ 1193.012621] em28xx #0: V4L2 devices /dev/video0 and /dev/vbi0 deregistered
[ 1219.198637] em28xx v4l2 driver version 0.1.0 loaded
[ 1219.198717] usbcore: registered new interface driver em28xx
[ 1234.852046] em28xx new video device (eb1a:2881): interface 0, class 255
[ 1234.852067] em28xx Has usb audio class
[ 1234.852072] em28xx #0: Alternate settings: 8
[ 1234.852083] em28xx #0: Alternate setting 0, max size= 0
[ 1234.852087] em28xx #0: Alternate setting 1, max size= 0
[ 1234.852092] em28xx #0: Alternate setting 2, max size= 1448
[ 1234.852097] em28xx #0: Alternate setting 3, max size= 2048
[ 1234.852101] em28xx #0: Alternate setting 4, max size= 2304
[ 1234.852106] em28xx #0: Alternate setting 5, max size= 2580
[ 1234.852111] em28xx #0: Alternate setting 6, max size= 2892
[ 1234.852116] em28xx #0: Alternate setting 7, max size= 3072
[ 1234.853157] em28xx #0: chip ID is em2882/em2883
[ 1235.025694] tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
[ 1235.100189] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 1235.100219] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 1235.100239] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 1235.100258] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 1235.100276] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1235.100294] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1235.100312] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 1235.100330] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 1235.100349] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 1235.100366] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1235.100384] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1235.100402] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1235.100420] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1235.100437] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1235.100455] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
[ 1235.100473] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 1235.100536] em28xx #0:
[ 1235.100543] em28xx #0: The support for this board weren't valid yet.
[ 1235.100548] em28xx #0: Please send a report of having this working
[ 1235.100553] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 1237.236235] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 1237.236251] em28xx #0: Found Pinnacle Hybrid Pro

Danach hat Kaffeine aber immer noch nicht den TV Button angezeigt.

Was mache ich falsch?

Vielen Dank schonmal im Vorraus!

MfG
PhiBa

Beiträge: 2

Registrierungsdatum: 08.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

2

08.11.2008, 13:39

gleiches Problem

Hallo,

habe leider das gleiche Problem.
Ich habe es nach dieser Anweisung versucht.
http://wiki.ubuntuusers.de/em28xx#Firmwa…r-Intrepid-Ibex
Wann kann da mit Unterstützung gerechnet werden? Will nicht zurück zu Edgy..........

Grüße Frank

PhiBa

User

  • »PhiBa« ist männlich
  • »PhiBa« ist der Autor dieses Themas

Beiträge: 5

Registrierungsdatum: 03.11.2008

Derivat: Xubuntu

Architektur: 32-Bit PC

  • Nachricht senden

3

09.11.2008, 15:51

Also anscheinend wird die Karte nicht unterstützt. Ich umgehe jetzt das Problem, dadurch dass ich immer einen älteren Kernel beim booten auswähle, da ich noch den letzten drauf habe, mit dem es ging. Ich hab ja einfach von Hardy auf Intrepid aktualisiert. Und da geht es wie früher ohne Probleme. Ist zwar doof, weil ich schon lieber immer mit dem neuen Kernel unterwegs wäre, aber das umbooten hält einen wenigstens davon ab zu viel Fernsehen zu schauen. :-)

Ich hoffe das das bald ohne Workarounds geht. Ist auch nicht toll, wenn die Hardware in der neuen Version schlechter geht als in der alten.

MfG Philipp

Beiträge: 2

Registrierungsdatum: 08.11.2008

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

4

09.12.2008, 21:58

Problem gelöst

Das Problem wurde anscheinend von unseren französischen Freunden gelöst.
http://forum.ubuntu-fr.org/viewtopic.php?id=181897&p=12

- zunächst muss das Paket "linux-image-2.6.27-9-generic" neu installiert werden
- dann ein Neustart
- dann das Paket http://jiemeb.free.fr/pinnacle/em28xx_27-9_i386.deb installiert
- und schließlich in der Konsole das Script http://jiemeb.free.fr/pinnacle/cleanEm28xx.sh ausgeführt werden.

Nach einem Neustart geht der Sound und die Karte hängt den Rechner nicht mehr auf.
bei ein und ausstöpseln kommt folgende dmesg Ausgabe

[ 737.975023] usb 4-1: USB disconnect, address 2
[ 738.005830] em28xx-input.c: remote control handler detached
[ 738.005838] audio: deinitializing audio device
[ 738.005841] audio: before waitstream
[ 738.005843] audio: after waitstream
[ 738.005845] audio: waiting for audioclients to release audio node
[ 738.006597] em28xx #0: disconnecting em28xx#0 video
[ 738.006601] em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered
[ 738.006667] em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered
[ 738.012040] : reading key failed (error=-19=-ENODEV)
[ 741.180015] usb 4-2: new high speed USB device using ehci_hcd and address 4
[ 741.320257] usb 4-2: configuration #1 chosen from 1 choice
[ 741.320418] em28xx: new video device (2304:0226): interface 0, class 255
[ 741.320422] em28xx: device is attached to a USB 2.0 bus
[ 741.320426] em28xx #0: Alternate settings: 8
[ 741.320429] em28xx #0: Alternate setting 0, max size= 0
[ 741.320432] em28xx #0: Alternate setting 1, max size= 0
[ 741.320439] em28xx #0: Alternate setting 2, max size= 1448
[ 741.320442] em28xx #0: Alternate setting 3, max size= 2048
[ 741.320445] em28xx #0: Alternate setting 4, max size= 2304
[ 741.320447] em28xx #0: Alternate setting 5, max size= 2580
[ 741.320456] em28xx #0: Alternate setting 6, max size= 2892
[ 741.320458] em28xx #0: Alternate setting 7, max size= 3072
[ 741.865613] attach_inform: tvp5150 detected.
[ 741.928467] tvp5150 0-005c: tvp5150am1 detected.
[ 743.424279] successfully attached tuner
[ 743.428998] em28xx #0: V4L2 VBI device registered as /dev/vbi0

Stelle ich in Mythtv die Soundqualität über "Recordings"-->"Live-TV" auf hoch muss ich allerdings 3-mal den Fernseher anwählen und wieder rausgehen bis ich Sound bekomme. Dann aber in klasse Qualität.
Probiert das doch bitte mal aus.
Vielleicht kann auch jemand besser französisch als ich und versteht noch besser was da gemacht wird um einen Eintrag im Wiki zu erstellen oder so.......

Viele Grüße frankknarf

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »frankknarf« (09.12.2008, 21:58)