Sie sind nicht angemeldet.

  • »Alterra« ist männlich
  • »Alterra« ist der Autor dieses Themas

Beiträge: 4

Registrierungsdatum: 08.06.2006

  • Nachricht senden

1

08.06.2006, 11:55

(gelöst) TCP/IP - ICMP Problem (Dapper Drake)

Hallo,

folgendes Problem:
Wenn ich eine TCP aufbauen möchte (z.B. Firefox, ssh oder wget) dann bekomme ich entweder die Fehlermeldung das der Server die Verbindung zurückgesetzt hätte oder wie bei ssh "Resource temporarily unavailable". Wenn ich dann ein zweites Mal verbinden möchte, dann funktioniert alles wunderbar.

Zuerst dachte ich es wäre ein DNS-Problem, aber dort funktioniert es einwandfrei und verzögerungsfrei, d.h. UDP Verbindungen sind kein Problem.

Dapper Drake 6.06 LTS vollständig auf dem neuesten Stand, Problem besteht mit 386 Kernelversion bzw. älteren Kerneln auch.

Das interessante ist, das es manchmal einwandfrei funktioniert und das Problem mit dem zweimaligen Laden nicht vorhanden ist. Ich kann jedoch nicht nachvollziehen, woran es liegt. Die Adresse wird immer per DHCP vergeben, doch auch mit einer statischen Adresse bleibt es bestehen. Ich habe es schon in unterschiedlichen Netzen ausprobiert, es war immer das gleiche Resultat.

Ein möglicher Auslöser für das Problem könnte eventuell mein Versuch sein meine Dell 1470 WLAN Karte in Betrieb zu nehmen, was ich mit dem Packet bcm43xx-fwcutter versucht habe. Eine Verbindung habe ich jedoch auch nicht zustande bekommen.

Notebook Dell D610

$ route -n
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
10.91.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 10.91.0.1 0.0.0.0 UG 0 0 0 eth0

$ dmesg
[4294667.296000] Linux version 2.6.15-23-686 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 14:03:07 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[4294667.296000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003f7d1800 (usable)
[4294667.296000] BIOS-e820: 000000003f7d1800 - 0000000040000000 (reserved)
[4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[4294667.296000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[4294667.296000] 119MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 260049
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 30673 pages, LIFO batch:7
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 DELL ) @ 0x000fc9b0
[4294667.296000] ACPI: RSDT (v001 DELL CPi R 0x27d5080b ASL 0x00000061) @ 0x3f7d1f90
[4294667.296000] ACPI: FADT (v001 DELL CPi R 0x27d5080b ASL 0x00000061) @ 0x3f7d2c00
[4294667.296000] ACPI: MADT (v001 DELL CPi R 0x27d5080b ASL 0x00000047) @ 0x3f7d3400
[4294667.296000] ACPI: ASF! (v016 DELL CPi R 0x27d5080b ASL 0x00000061) @ 0x3f7d3000
[4294667.296000] ACPI: MCFG (v016 DELL CPi R 0x27d5080b ASL 0x00000061) @ 0x3f7d33c0
[4294667.296000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x3f7d23e6
[4294667.296000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x3f7d220e
[4294667.296000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x3f7d2013
[4294667.296000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:13 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda6 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 1995.242 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.464000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294669.464000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.491000] Memory: 1018904k/1040196k available (2101k kernel code, 20520k reserved, 592k data, 332k init, 122692k highmem)
[4294669.491000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.551000] Calibrating delay using timer specific routine.. 3994.25 BogoMIPS (lpj=1997129)
[4294669.551000] Security Framework v1.0.0 initialized
[4294669.551000] SELinux: Disabled at boot.
[4294669.551000] Mount-cache hash table entries: 512
[4294669.551000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[4294669.551000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[4294669.551000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294669.551000] CPU: L2 cache: 2048K
[4294669.551000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
[4294669.551000] mtrr: v2.0 (20020519)
[4294669.551000] Enabling fast FPU save and restore... done.
[4294669.551000] Enabling unmasked SIMD FPU exception support... done.
[4294669.551000] Checking 'hlt' instruction... OK.
[4294669.555000] SMP alternatives: switching to UP code
[4294669.555000] checking if image is initramfs... it is
[4294670.057000] Freeing initrd memory: 6798k freed
[4294670.072000] ACPI: Looking for DSDT ... not found!
[4294670.076000] CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
[4294670.076000] Total of 1 processors activated (3994.25 BogoMIPS).
[4294670.077000] ENABLING IO-APIC IRQs
[4294670.077000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294670.188000] Brought up 1 CPUs
[4294670.188000] NET: Registered protocol family 16
[4294670.188000] EISA bus registered
[4294670.188000] ACPI: bus type pci registered
[4294670.207000] PCI: PCI BIOS revision 2.10 entry at 0xfb5be, last bus=4
[4294670.207000] PCI: Using MMCONFIG
[4294670.207000] ACPI: Subsystem revision 20051216
[4294670.227000] ACPI: Interpreter enabled
[4294670.227000] ACPI: Using IOAPIC for interrupt routing
[4294670.227000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.227000] PCI: Probing PCI hardware (bus 00)
[4294670.227000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294670.252000] Boot video device is 0000:00:02.0
[4294670.253000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[4294670.253000] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[4294670.253000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294670.253000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.253000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.292000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[4294670.292000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[4294670.293000] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[4294670.293000] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[4294670.293000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[4294670.293000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[4294670.294000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[4294670.296000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[4294670.298000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.298000] pnp: PnP ACPI init
[4294670.347000] pnp: PnP ACPI: found 15 devices
[4294670.347000] PnPBIOS: Disabled by ACPI PNP
[4294670.347000] PCI: Using ACPI for IRQ routing
[4294670.347000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.377000] pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
[4294670.377000] pnp: 00:01: ioport range 0x1000-0x1005 could not be reserved
[4294670.377000] pnp: 00:01: ioport range 0x1008-0x100f could not be reserved
[4294670.377000] pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved
[4294670.377000] pnp: 00:02: ioport range 0x1006-0x1007 has been reserved
[4294670.377000] pnp: 00:02: ioport range 0x100a-0x1059 could not be reserved
[4294670.377000] pnp: 00:02: ioport range 0x1060-0x107f has been reserved
[4294670.377000] pnp: 00:02: ioport range 0x1080-0x10bf has been reserved
[4294670.377000] pnp: 00:02: ioport range 0x10c0-0x10df has been reserved
[4294670.377000] pnp: 00:07: ioport range 0x900-0x90f has been reserved
[4294670.377000] pnp: 00:07: ioport range 0x910-0x91f has been reserved
[4294670.377000] pnp: 00:07: ioport range 0x920-0x92f has been reserved
[4294670.377000] pnp: 00:07: ioport range 0x93c-0x93f has been reserved
[4294670.377000] pnp: 00:07: ioport range 0x940-0x97f has been reserved
[4294670.377000] pnp: 00:0d: ioport range 0x930-0x93b has been reserved
[4294670.377000] pnp: 00:0e: ioport range 0x7b0-0x7bb has been reserved
[4294670.377000] pnp: 00:0e: ioport range 0x7c0-0x7df has been reserved
[4294670.377000] pnp: 00:0e: ioport range 0xbb0-0xbbb has been reserved
[4294670.377000] pnp: 00:0e: ioport range 0xbc0-0xbdf has been reserved
[4294670.377000] pnp: 00:0e: ioport range 0xfb0-0xfbb has been reserved
[4294670.377000] pnp: 00:0e: ioport range 0xfc0-0xfdf has been reserved
[4294670.377000] pnp: 00:0e: ioport range 0x13b0-0x13bb has been reserved
[4294670.377000] pnp: 00:0e: ioport range 0x13c0-0x13df has been reserved
[4294670.377000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294670.377000] PCI: Failed to allocate I/O resource #7:1000@10000 for 0000:00:1e.0
[4294670.377000] PCI: Bridge: 0000:00:1c.0
[4294670.377000] IO window: disabled.
[4294670.377000] MEM window: dfd00000-dfdfffff
[4294670.377000] PREFETCH window: disabled.
[4294670.377000] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[4294670.377000] IO window: 00001400-000014ff
[4294670.377000] IO window: 00001800-000018ff
[4294670.377000] PREFETCH window: 50000000-51ffffff
[4294670.377000] MEM window: 52000000-53ffffff
[4294670.377000] PCI: Bridge: 0000:00:1e.0
[4294670.377000] IO window: disabled.
[4294670.377000] MEM window: dfc00000-dfcfffff
[4294670.377000] PREFETCH window: 50000000-51ffffff
[4294670.377000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294670.377000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294670.377000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294670.377000] PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
[4294670.377000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177
[4294670.378000] audit: initializing netlink socket (disabled)
[4294670.378000] audit(1149761550.376:1): initialized
[4294670.378000] highmem bounce pool size: 64 pages
[4294670.378000] VFS: Disk quotas dquot_6.5.1
[4294670.378000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.378000] Initializing Cryptographic API
[4294670.378000] io scheduler noop registered
[4294670.378000] io scheduler anticipatory registered
[4294670.378000] io scheduler deadline registered
[4294670.378000] io scheduler cfq registered
[4294670.378000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294670.378000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294670.378000] assign_interrupt_mode Found MSI capability
[4294670.378000] Allocate Port Service[pcie00]
[4294670.378000] Allocate Port Service[pcie02]
[4294670.378000] Allocate Port Service[pcie03]
[4294670.378000] isapnp: Scanning for PnP cards...
[4294670.736000] isapnp: No Plug & Play device found
[4294670.749000] Real Time Clock Driver v1.12
[4294670.749000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294670.753000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.753000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.753000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294670.754000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.754000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294670.755000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.756000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294670.756000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.756000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.756000] mice: PS/2 mouse device common for all mice
[4294670.757000] EISA: Probing bus 0 at eisa.0
[4294670.757000] Cannot allocate resource for EISA slot 1
[4294670.757000] EISA: Detected 0 cards.
[4294670.757000] NET: Registered protocol family 2
[4294670.766000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.767000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.767000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[4294670.768000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[4294670.769000] TCP: Hash tables configured (established 131072 bind 65536)
[4294670.769000] TCP reno registered
[4294670.770000] TCP bic registered
[4294670.770000] NET: Registered protocol family 1
[4294670.770000] NET: Registered protocol family 8
[4294670.770000] NET: Registered protocol family 20
[4294670.770000] Using IPI No-Shortcut mode
[4294670.770000] ACPI wakeup devices:
[4294670.770000] LID PBTN PCI0 USB0 USB1 USB2 USB4 USB3 MODM PCIE NIC
[4294670.770000] ACPI: (supports S0 S3 S4 S5)
[4294670.770000] Freeing unused kernel memory: 332k freed
[4294670.808000] vga16fb: initializing
[4294670.808000] vga16fb: mapped to 0xc00a0000
[4294670.926000] Console: switching to colour frame buffer device 80x25
[4294670.926000] fb0: VGA16 VGA frame buffer device
[4294672.012000] Capability LSM initialized
[4294672.037000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[4294672.037000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294672.040000] ACPI: Thermal Zone [THM] (37 C)
[4294672.416000] SCSI subsystem initialized
[4294672.417000] ACPI: bus type scsi registered
[4294672.417000] libata version 1.20 loaded.
[4294672.418000] ahci 0000:00:1f.2: version 1.2
[4294672.418000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 17 (level, low) -> IRQ 201
[4294672.418000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[4294672.418000] ahci: probe of 0000:00:1f.2 failed with error -12
[4294672.420000] ata_piix 0000:00:1f.2: version 1.05
[4294672.420000] ata_pci_init_one: pci_dev class+intf: 0x10180
[4294672.420000] ata_pci_init_one: NO_LEGACY == 0
[4294672.420000] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 17 (level, low) -> IRQ 201
[4294672.420000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294672.420000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
[4294672.623000] ata1: dev 0 cfg 00:045a 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3e48 87:4023 88:203f 93:600b
[4294672.623000] ata1: dev 0 ATA-6, max UDMA/100, 117210240 sectors: LBA48
[4294672.623000] ata1(0): applying bridge limits
[4294672.623000] ata_acpi_push_id: skipping for PATA mode
[4294672.623000] ata1: dev 0 configured for UDMA/100
[4294672.623000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.623000] pata_get_dev_handle: dev_handle: 0xdffe7d80, parent_handle: 0xc1a0de40
[4294672.623000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff65c00, *handle=0xdffe7d80
[4294672.624000] do_drive_get_GTF: drive w/ adr=0: v: 0x00000000
[4294672.624000] scsi0 : ata_piix
[4294672.624000] Vendor: ATA Model: HTS726060M9AT00 Rev: MH4O
[4294672.624000] Type: Direct-Access ANSI SCSI revision: 05
[4294672.624000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.624000] pata_get_dev_handle: dev_handle: 0xdffe7d80, parent_handle: 0xc1a0de40
[4294672.624000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff65c00, *handle=0xdffe7d80
[4294672.624000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
[4294673.053000] ata2: dev 0 cfg 00:85c0 49:0f00 82:4218 83:5000 84:4000 85:4218 86:1000 87:4000 88:0407 93:604d
[4294673.053000] ata2: dev 0 ATAPI, max UDMA/33
[4294673.053000] ata2(0): applying bridge limits
[4294673.053000] ata_acpi_push_id: skipping for PATA mode
[4294673.054000] ata2: dev 0 configured for UDMA/33
[4294673.054000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294673.054000] pata_get_dev_handle: dev_handle: 0xdffe7d80, parent_handle: 0xc1a0de40
[4294673.054000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff65c00, *handle=0xdffe7d80
[4294673.055000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffe6540
[4294673.055000] scsi1 : ata_piix
[4294673.062000] Vendor: TSSTcorp Model: DVD+-RW TS-L532B Rev: DE03
[4294673.062000] Type: CD-ROM ANSI SCSI revision: 05
[4294673.062000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294673.062000] pata_get_dev_handle: dev_handle: 0xdffe7d80, parent_handle: 0xc1a0de40
[4294673.062000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff65c00, *handle=0xdffe7d80
[4294673.069000] Driver 'sd' needs updating - please use bus_type methods
[4294673.081000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[4294673.081000] SCSI device sda: drive cache: write back
[4294673.083000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[4294673.084000] SCSI device sda: drive cache: write back
[4294673.084000] sda: sda1 sda2 sda3 < sda5 sda6 >
[4294673.137000] sd 0:0:0:0: Attached scsi disk sda
[4294673.532000] usbcore: registered new driver usbfs
[4294673.532000] usbcore: registered new driver hub
[4294673.533000] USB Universal Host Controller Interface driver v2.3
[4294673.534000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294673.534000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294673.534000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294673.588000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294673.588000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bf80
[4294673.589000] hub 1-0:1.0: USB hub found
[4294673.589000] hub 1-0:1.0: 2 ports detected
[4294673.700000] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 17 (level, low) -> IRQ 201
[4294673.700000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294673.700000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294673.700000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294673.700000] uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000bf60
[4294673.700000] hub 2-0:1.0: USB hub found
[4294673.700000] hub 2-0:1.0: 2 ports detected
[4294673.817000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
[4294673.817000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294673.817000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294673.817000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294673.817000] uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000bf40
[4294673.817000] hub 3-0:1.0: USB hub found
[4294673.817000] hub 3-0:1.0: 2 ports detected
[4294673.934000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177
[4294673.934000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294673.934000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294673.934000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294673.934000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000bf20
[4294673.934000] hub 4-0:1.0: USB hub found
[4294673.934000] hub 4-0:1.0: 2 ports detected
[4294674.041000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
[4294674.041000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294674.041000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294674.041000] ehci_hcd 0000:00:1d.7: debug port 1
[4294674.041000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294674.042000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294674.042000] ehci_hcd 0000:00:1d.7: irq 169, io mem 0xffa80800
[4294674.046000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294674.046000] hub 5-0:1.0: USB hub found
[4294674.046000] hub 5-0:1.0: 8 ports detected
[4294674.174000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294674.174000] ide0: ports already in use, skipping probe
[4294674.174000] ide1: I/O resource 0x170-0x177 not free.
[4294674.174000] ide1: ports already in use, skipping probe
[4294674.201000] Attempting manual resume
[4294674.225000] EXT3-fs: mounted filesystem with ordered data mode.
[4294674.226000] kjournald starting. Commit interval 5 seconds
[4294674.640000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[4294685.725000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294685.726000] 1:0:0:0: Attached scsi generic sg1 type 5
[4294686.058000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[4294686.058000] Uniform CD-ROM driver Revision: 3.20
[4294686.058000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294686.588000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294686.595000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294686.672000] Linux agpgart interface v0.101 (c) Dave Jones
[4294686.676000] agpgart: Detected an Intel 915GM Chipset.
[4294686.677000] agpgart: Detected 7932K stolen memory.
[4294686.693000] agpgart: AGP aperture is 256M @ 0xc0000000
[4294687.026000] tg3.c:v3.47 (Dec 28, 2005)
[4294687.026000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294687.026000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[4294687.031000] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:22:bc:10:dc
[4294687.031000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[4294687.031000] eth0: dma_rwctrl[76180000]
[4294687.253000] input: PC Speaker as /class/input/input1
[4294687.471000] hw_random: cannot enable RNG, aborting
[4294687.628000] input: PS/2 Mouse as /class/input/input2
[4294687.654000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[4294687.775000] usbcore: registered new driver hiddev
[4294687.807000] input: Logitech Optical USB Mouse as /class/input/input4
[4294687.808000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-1
[4294687.808000] usbcore: registered new driver usbhid
[4294687.808000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294687.876000] parport: PnPBIOS parport detected.
[4294687.876000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294687.893000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177
[4294687.893000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0182]
[4294687.893000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294687.893000] Yenta: Routing CardBus interrupts to PCI
[4294687.893000] Yenta TI: socket 0000:03:01.0, mfunc 0x01111122, devctl 0x64
[4294687.910000] ts: Compaq touchscreen protocol output
[4294688.095000] ieee80211_crypt: registered algorithm 'NULL'
[4294688.148000] Yenta: ISA IRQ mask 0x0c78, PCI irq 177
[4294688.148000] Socket status: 30000006
[4294688.148000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[4294688.148000] pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff
[4294688.148000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
[4294688.168000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294688.168000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294688.212000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 169
[4294688.213000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[4294688.265000] bcm43xx driver
[4294688.524000] intel8x0_measure_ac97_clock: measured 51070 usecs
[4294688.524000] intel8x0: clocking to 48000
[4294688.528000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 201
[4294688.917000] cs: IO port probe 0x100-0x4ff: excluding 0x280-0x287 0x370-0x37f 0x3f0-0x3ff
[4294688.919000] cs: IO port probe 0xc00-0xcf7: clean.
[4294688.920000] cs: IO port probe 0xa00-0xaff: clean.
[4294689.165000] NET: Registered protocol family 17
[4294689.204000] lp0: using parport0 (interrupt-driven).
[4294689.262000] Adding 522072k swap on /dev/sda5. Priority:-1 extents:1 across:522072k
[4294689.458000] EXT3 FS on sda6, internal journal
[4294689.644000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294689.644000] md: bitmap version 4.39
[4294690.012000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[4294690.012000] tg3: eth0: Flow control is on for TX and on for RX.
[4294690.252000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL]dm-devel@redhat.com[/EMAIL]
[4294690.890000] cdrom: open failed.
[4294692.128000] NET: Registered protocol family 15
[4294692.973000] Netfilter messages via NETLINK v0.30.
[4294692.994000] ip_conntrack version 2.4 (8126 buckets, 65008 max) - 232 bytes per conntrack
[4294693.061000] NET: Registered protocol family 10
[4294693.062000] lo: Disabled Privacy Extensions
[4294693.062000] IPv6 over IPv4 tunneling driver
[4294693.065000] ip_tables: (C) 2000-2002 Netfilter core team
[4294693.653000] Initializing IPsec netlink socket
[4294696.497000] ACPI: AC Adapter [AC] (on-line)
[4294696.808000] ACPI: Battery Slot [BAT0] (battery present)
[4294696.808000] ACPI: Battery Slot [BAT1] (battery absent)
[4294696.863000] ACPI: Lid Switch [LID]
[4294696.863000] ACPI: Power Button (CM) [PBTN]
[4294696.863000] ACPI: Sleep Button (CM) [SBTN]
[4294696.967000] ibm_acpi: ec object not found
[4294697.002000] pcc_acpi: loading...
[4294697.085000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[4294697.086000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[4294697.086000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[4294701.126000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[4294703.261000] eth0: no IPv6 routers present
[4294703.674000] ppdev: user-space parallel port driver
[4294704.159000] [drm] Initialized drm 1.0.1 20051102
[4294704.163000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294704.164000] [drm] Initialized i915 1.4.0 20060119 on minor 0
[4294705.670000] apm: BIOS not found.
[4294712.607000] Bluetooth: Core ver 2.8
[4294712.607000] NET: Registered protocol family 31
[4294712.607000] Bluetooth: HCI device and connection manager initialized
[4294712.607000] Bluetooth: HCI socket layer initialized
[4294712.656000] Bluetooth: L2CAP ver 2.8
[4294712.656000] Bluetooth: L2CAP socket layer initialized
[4294712.694000] Bluetooth: RFCOMM socket layer initialized
[4294712.694000] Bluetooth: RFCOMM TTY layer initialized
[4294712.694000] Bluetooth: RFCOMM ver 1.7
[4294715.287000] eth0: no IPv6 routers present


Wenn ich noch irgendwelche anderen hilfreichen Informationen zur Verfügung stellen kann/muss, dann bitte schreiben.

Ich wäre schön, wenn der eine oder andere noch hilfreiche Kommentare und Ideen hätte.

Danke.

Michael

Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »Alterra« (11.06.2006, 19:53)


clint

User

  • »clint« ist männlich

Beiträge: 250

Registrierungsdatum: 23.06.2005

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

2

08.06.2006, 14:22

Hmm, benutzt du absichtlich ein Class A Netz? Und wenn ja, sollte die Netmask dann nicht 255.0.0.0 sein? Bin nicht sicher, ist schon so lang her ... ;)

Ach und btw. dein Thema soll vermutlich TCP/IP heißen. ICMP ist das Protokoll für Ping usw. ... Änder das mal, vielleicht verirrt sich dann noch einer hier her. ;)
When all else fails, read the instructions...

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »clint« (08.06.2006, 14:25)


  • »Alterra« ist männlich
  • »Alterra« ist der Autor dieses Themas

Beiträge: 4

Registrierungsdatum: 08.06.2006

  • Nachricht senden

3

08.06.2006, 14:38

Hi,

danke für die Antwort.

Die Routingtabelle stimmt, denn ich habe einen anderen Rechner daneben stehen und bei dem ist die Tabelle auch so.

Die Überschrift habe ich angepasst, doch das Problem besteht auch bei ICMP, also ping, traceroute usw. und deswegen habe ich das auch in der Überschrift belassen.

Michael

clint

User

  • »clint« ist männlich

Beiträge: 250

Registrierungsdatum: 23.06.2005

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

4

08.06.2006, 18:11

Hast du von Breezy auf Dapper upgegraded oder Dapper neu installiert? Bei dem Upgrade gibt es bekannte Netzwerkprobleme...
When all else fails, read the instructions...

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »clint« (08.06.2006, 18:11)


  • »Alterra« ist männlich
  • »Alterra« ist der Autor dieses Themas

Beiträge: 4

Registrierungsdatum: 08.06.2006

  • Nachricht senden

5

09.06.2006, 01:47

Ich hatte ein dist-upgrade gemacht, wobei der Fehler meiner Erinnerung nach nicht sofort nach dem Upgrade auftrat, sondern erst nach irgeneiner Aktualisierung.

Stellen sich nun zwei Fragen:
1. Wo kann ich über das Problem nachlesen?
2. Vielleicht eine Idee, ob und wie das gelöst werden kann?

Btw. Neu installieren will ich nicht, da ich mein Ubuntu nun gerade mal so schön eingerichtet habe und endlich mal anständig arbeiten kann (zu mindestens offline).

Danke für Deine Hilfe.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Alterra« (09.06.2006, 01:53)


  • »Alterra« ist männlich
  • »Alterra« ist der Autor dieses Themas

Beiträge: 4

Registrierungsdatum: 08.06.2006

  • Nachricht senden

6

11.06.2006, 19:09

Gelöst: TCP/IP - ICMP Problem (Dapper Drake)

So, eine Lösung habe ich trotz Suche nicht gefunden. Leider funktionierte das "drüberinstallieren" von Dapper auch nicht. So hatte ich mich doch entschlossen neu zu installieren und nun läuft es einwandfrei.

Das Thema wäre dann nun abgeschlossen.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Alterra« (11.06.2006, 19:49)


clint

User

  • »clint« ist männlich

Beiträge: 250

Registrierungsdatum: 23.06.2005

Derivat: Ubuntu

Architektur: 32-Bit PC

  • Nachricht senden

7

11.06.2006, 19:28

Dann schreib doch bitte noch ein (Gelöst) vor das Thema.
When all else fails, read the instructions...